summaryrefslogtreecommitdiff
path: root/README.OS2.template
diff options
context:
space:
mode:
Diffstat (limited to 'README.OS2.template')
-rw-r--r--README.OS2.template159
1 files changed, 159 insertions, 0 deletions
diff --git a/README.OS2.template b/README.OS2.template
new file mode 100644
index 0000000..eff2c0b
--- /dev/null
+++ b/README.OS2.template
@@ -0,0 +1,159 @@
+Port of GNU make to OS/2.
+
+Features of GNU make that do not work under OS/2:
+ - remote job execution
+ - dynamic load balancing
+
+
+Special features of the OS/2 version:
+
+Due to the fact that some people might want to use sh syntax in
+Makefiles while others might want to use OS/2's native shell cmd.exe,
+GNU make supports both shell types. The following list defines the order
+that is used to determine the shell:
+
+ 1. The shell specified by the environment variable MAKESHELL.
+ 2. The shell specified by the SHELL variable within a Makefile. As on
+ Unix, SHELL is NOT taken from the environment.
+ 3. The shell specified by the COMSPEC environment variable.
+ 4. The shell specified by the OS2_SHELL environment variable.
+ 5. If none of the above is defined /bin/sh is used as default. This
+ happens e.g. in the make testsuite.
+
+Note: - Points 3 and 4 can be turned off at compile time by adding
+ -DNO_CMD_DEFAULT to the CPPFLAGS.
+ - DOS support is not tested for EMX and therefore might not work.
+ - The UNIXROOT environment variable is supported to find /bin/sh
+ if it is not on the current drive.
+
+
+COMPILATION OF GNU MAKE FOR OS/2:
+
+I. ***** SPECIAL OPTIONS *****
+
+ - At compile time you can turn off that cmd is used as default shell
+ (but only /bin/sh). Simply set CPPFLAGS="-DNO_CMD_DEFAULT" and make
+ will not use cmd unless you cause it to do so by setting MAKESHELL to
+ cmd or by specifying SHELL=cmd in your Makefile.
+
+ - At compile time you can set CPPFLAGS="-DNO_CHDIR2" to turn off that
+ GNU make prints drive letters. This is necessary if you want to run
+ the testsuite.
+
+
+II. ***** REQUIREMENTS FOR THE COMPILATION *****
+
+A standard Unix like build environment:
+
+ - sh compatible shell (ksh, bash, ash, but tested only with pdksh 5.2.14
+ (release 2)
+ If you use pdksh it is recommended to update to 5.2.14 release 2. Older
+ versions may not work! You can get this version at
+ http://www.math.ohio-state.edu/~ilya/software/os2/pdksh-5.2.14-bin-2.zip
+ - GNU file utilities (make sure that install.exe from the file utilities
+ is in front of your PATH before X:\OS2\INSTALL\INSTALL.EXE. I recommend
+ also to change the filename to ginstall.exe instead of install.exe
+ to avoid confusion with X:\OS2\INSTALL\INSTALL.EXE)
+ - GNU shell utilities
+ - GNU text utilities
+ - gawk
+ - grep
+ - sed
+ - GNU make 3.79.1 (special OS/2 patched version)
+ - perl 5.005 or higher
+ - GNU texinfo (you can use 3.1 (gnuinfo.zip), but I recommend 4.0)
+
+If you want to recreate the configuration files (developers only!)
+you need also: GNU m4 1.4, autoconf 2.57, automake 1.7.2 (or compatible)
+
+
+III. ***** COMPILATION AND INSTALLATION *****
+
+ a) ** Developers only - Everyone else should skip this section **
+ To recreate the configuration files use:
+
+ export EMXSHELL=ksh
+ aclocal -I config
+ automake
+ autoconf
+ autoheader
+
+
+b) Installation into x:/usr
+
+ Note: Although it is possible to compile make using "./configure",
+ "make", "make install" this is not recommended. In particular,
+ you must ALWAYS use LDFLAGS="-Zstack 0x8000" because the default
+ stack size is far to small and make will not work properly!
+
+Recommended environment variables and installation options:
+
+ export ac_executable_extensions=".exe"
+ export CPPFLAGS="-D__ST_MT_ERRNO__"
+ export CFLAGS="-O2 -Zomf -Zmt"
+ export LDFLAGS="-Zcrtdll -Zlinker /exepack:2 -Zlinker /pm:vio -Zstack 0x8000"
+ export RANLIB="echo"
+ ./configure --prefix=x:/usr --infodir=x:/usr/share/info --mandir=x:/usr/share/man --without-included-gettext
+ make AR=emxomfar
+ make install
+
+Note: If you use gcc 2.9.x or higher I recommend to set also LIBS="-lgcc"
+
+Note: You can add -DNO_CMD_DEFAULT and -DNO_CHDIR2 to CPPFLAGS.
+ See section I. for details.
+
+
+IV. ***** NLS support *****
+
+GNU make has NLS (National Language Support), with the following
+caveats:
+
+ a) It will only work with GNU gettext, and
+ b) GNU gettext support is not included in the GNU make package.
+
+Therefore, if you wish to enable the internationalization features of
+GNU make you must install GNU gettext on your system before configuring
+GNU make.
+
+You can choose the languages to be installed. To install support for
+English, German and French only enter:
+
+ export LINGUAS="en de fr"
+
+If you don't specify LINGUAS all languages are installed.
+
+If you don't want NLS support (English only) use the option
+--disable-nls for the configure script. Note if GNU gettext is not
+installed then NLS will not be enabled regardless of this flag.
+
+
+V. ***** Running the make test suite *****
+
+To run the included make test suite you have to set
+
+ CPPFLAGS="-D__ST_MT_ERRNO__ -DNO_CMD_DEFAULT -DNO_CHDIR2"
+
+before you compile make. This is due to some restrictions of the
+testsuite itself. -DNO_CMD_DEFAULT causes make to use /bin/sh as default
+shell in every case. Normally you could simply set MAKESHELL="/bin/sh"
+to do this but the testsuite ignores the environment. -DNO_CHDIR2 causes
+make not to use drive letters for directory names (i.e. _chdir2() and
+_getcwd2() are NOT used). The testsuite interpretes the whole output of
+make, especially statements like make[1]: Entering directory
+`C:/somewhere/make-3.79.1/tests' where the testsuite does not expect the
+drive letter. This would be interpreted as an error even if there is
+none.
+
+To run the testsuite do the following:
+
+ export CPPFLAGS="-D__ST_MT_ERRNO__ -DNO_CMD_DEFAULT -DNO_CHDIR2"
+ export CFLAGS="-Zomf -O2 -s -Zmt"
+ export LDFLAGS="-Zcrtdll -Zmt -s -Zlinker /exepack:2 -Zlinker /pm:vio -Zstack 0x8000"
+ export RANLIB="echo"
+ ./configure --prefix=x:/usr --disable-nls
+ make AR=emxomfar
+ make checks
+
+All tests should work fine with the exception of "default_names" which
+is because OS/2 file systems are not case sensitive ("makefile" and
+"Makefile" specify the same file).