path: root/README

% Pandoc User's Guide
% John MacFarlane
% December 7, 2009

Pandoc is a [Haskell] library for converting from one markup format to
another, and a command-line tool that uses this library. It can read
[markdown] and (subsets of) [reStructuredText], [HTML], and [LaTeX]; and
it can write [markdown], [reStructuredText], [HTML], [LaTeX], [ConTeXt],
[RTF], [DocBook XML], [OpenDocument XML], [ODT], [GNU Texinfo],
[MediaWiki markup], [groff man] pages, and [S5] HTML slide shows.
Pandoc's enhanced version of markdown includes syntax for footnotes,
tables, flexible ordered lists, definition lists, delimited code blocks,
superscript, subscript, strikeout, title blocks, automatic tables of
contents, embedded LaTeX math, and markdown inside HTML block elements.
(These enhancements can be disabled if a drop-in replacement for
`Markdown.pl` is desired.)

In contrast to most existing tools for converting markdown to HTML, which
use regex substitutions, Pandoc has a modular design: it consists of a
set of readers, which parse text in a given format and produce a native
representation of the document, and a set of writers, which convert
this native representation into a target format. Thus, adding an input
or output format requires only adding a reader or writer.

[markdown]: http://daringfireball.net/projects/markdown/
[reStructuredText]: http://docutils.sourceforge.net/docs/ref/rst/introduction.html
[S5]: http://meyerweb.com/eric/tools/s5/
[HTML]:  http://www.w3.org/TR/html40/
[LaTeX]: http://www.latex-project.org/
[ConTeXt]: http://www.pragma-ade.nl/ 
[RTF]:  http://en.wikipedia.org/wiki/Rich_Text_Format
[DocBook XML]:  http://www.docbook.org/
[OpenDocument XML]: http://opendocument.xml.org/ 
[ODT]: http://en.wikipedia.org/wiki/OpenDocument
[MediaWiki markup]: http://www.mediawiki.org/wiki/Help:Formatting
[groff man]: http://developer.apple.com/DOCUMENTATION/Darwin/Reference/ManPages/man7/groff_man.7.html
[Haskell]:  http://www.haskell.org/
[GNU Texinfo]: http://www.gnu.org/software/texinfo/

© 2006-9 John MacFarlane (jgm at berkeley dot edu). Released under the
[GPL], version 2 or greater.  This software carries no warranty of
any kind.  (See COPYRIGHT for full copyright and warranty notices.)
Contributors:  Recai Oktaş (build system, debian package, wrapper
scripts), Peter Wang (Texinfo writer), Andrea Rossato (OpenDocument writer).

[GPL]: http://www.gnu.org/copyleft/gpl.html "GNU General Public License"

Using Pandoc
============

If you run `pandoc` without arguments, it will accept input from
stdin.  If you run it with file names as arguments, it will take input
from those files.  By default, `pandoc` writes its output to stdout.[^1]
If you want to write to a file, use the `-o` option:

    pandoc -o hello.html hello.txt

[^1]:  The exception is for `odt`.  Since this is a binary output format,
       an output file must be specified explicitly.

Note that you can specify multiple input files on the command line.
`pandoc` will concatenate them all (with blank lines between them)
before parsing:

    pandoc -s ch1.txt ch2.txt refs.txt > book.html

(The `-s` option here tells `pandoc` to produce a standalone HTML file,
with a proper header, rather than a fragment.  For more details on this
and many other command-line options, see below.)

Instead of a filename, you can specify an absolute URI. In this
case pandoc will attempt to download the content via HTTP:

    pandoc -f html -t markdown http://www.fsf.org

The format of the input and output can be specified explicitly using
command-line options.  The input format can be specified using the
`-r/--read` or `-f/--from` options, the output format using the
`-w/--write` or `-t/--to` options.  Thus, to convert `hello.txt` from
markdown to LaTeX, you could type:

	pandoc -f markdown -t latex hello.txt

To convert `hello.html` from html to markdown:

	pandoc -f html -t markdown hello.html

Supported output formats include `markdown`, `latex`, `context`
(ConTeXt), `html`, `rtf` (rich text format), `rst`
(reStructuredText), `docbook` (DocBook XML), `opendocument`
(OpenDocument XML), `odt` (OpenOffice text document), `texinfo`, (GNU
Texinfo), `mediawiki` (MediaWiki markup), `man` (groff man), and `s5`
(which produces an HTML file that acts like powerpoint).

Supported input formats include `markdown`, `html`, `latex`, and `rst`.
Note that the `rst` reader only parses a subset of reStructuredText
syntax. For example, it doesn't handle tables, option lists, or
footnotes. But for simple documents it should be adequate. The `latex`
and `html` readers are also limited in what they can do.

If you don't specify a reader or writer explicitly, `pandoc` will
try to determine the input and output format from the extensions of
the input and output filenames.  Thus, for example, 

	pandoc -o hello.tex hello.txt

will convert `hello.txt` from markdown to LaTeX.  If no output file
is specified (so that output goes to stdout), or if the output file's
extension is unknown, the output format will default to HTML.
If no input file is specified (so that input comes from stdin), or
if the input files' extensions are unknown, the input format will
be assumed to be markdown unless explicitly specified.

Character encodings
-------------------

All input is assumed to be in the UTF-8 encoding, and all output
is in UTF-8 (unless your version of pandoc was compiled using
GHC 6.12 or higher, in which case the local encoding will be used).
If your local character encoding is not UTF-8 and you use
accented or foreign characters, you should pipe the input and output
through [`iconv`]. For example,

	iconv -t utf-8 source.txt | pandoc | iconv -f utf-8 > output.html

will convert `source.txt` from the local encoding to UTF-8, then
convert it to HTML, then convert back to the local encoding,
putting the output in `output.html`.

Wrappers
========

`markdown2pdf`
--------------

The standard Pandoc installation includes `markdown2pdf`, a wrapper
around `pandoc` and `pdflatex` that produces PDFs directly from markdown
sources. The default behavior of `markdown2pdf` is to create a file with
the same base name as the first argument and the extension `pdf`; thus,
for example,

   markdown2pdf sample.txt endnotes.txt

will produce `sample.pdf`.  (If `sample.pdf` exists already,
it will be backed up before being overwritten.)  An output file
name can be specified explicitly using the `-o` option:

   markdown2pdf -o book.pdf chap1 chap2

If no input file is specified, input will be taken from stdin.
All of `pandoc`'s options will work with `markdown2pdf` as well.

`markdown2pdf` assumes that `pdflatex` is in the path.  It also
assumes that the following LaTeX packages are available:
`unicode`, `fancyhdr` (if you have verbatim text in footnotes),
`graphicx` (if you use images), `array` (if you use tables),
and `ulem` (if you use strikeout text).  If they are not already
included in your LaTeX distribution, you can get them from
[CTAN]. A full [TeX Live] or [MacTeX] distribution will have all of
these packages.

`hsmarkdown`
------------

A user who wants a drop-in replacement for `Markdown.pl` may create
a symbolic link to the `pandoc` executable called `hsmarkdown`. When
invoked under the name `hsmarkdown`, `pandoc` will behave as if the
`--strict` flag had been selected, and no command-line options will be
recognized. However, this approach does not work under Cygwin, due to
problems with its simulation of symbolic links.

[Cygwin]:  http://www.cygwin.com/ 
[`iconv`]: http://www.gnu.org/software/libiconv/
[CTAN]: http://www.ctan.org "Comprehensive TeX Archive Network"
[TeX Live]: http://www.tug.org/texlive/
[MacTeX]:   http://www.tug.org/mactex/

Command-line options
====================

Various command-line options can be used to customize the output.
For further documentation, see the `pandoc(1)` man page.

`-f`, `--from`, `-r`, or `--read` *format*
:   specifies the input format (the format Pandoc will be converting
    *from*). *format* can be `native`, `markdown`, `rst`, `html`, or
    `latex`.  (`+lhs` can be appended to indicate that the input should
    be treated as literate Haskell source.  See
    [Literate Haskell support](#literate-haskell-support), below.)

`-t`, `--to`, `-w`, or `--write` *format*
:   specifies the output format -- the format Pandoc will
    be converting *to*. *format* can be `native`, `html`, `s5`,
    `docbook`, `opendocument`, `latex`, `context`, `markdown`, `man`,
    `rst`, and `rtf`. (`+lhs` can be appended to indicate that the
    output should be treated as literate Haskell source. See
    [Literate Haskell support](#literate-haskell-support), below.)

`-s` or `--standalone`
:   indicates that a standalone document is to be produced (with
    appropriate headers and footers), rather than a fragment.

`-o` or `--output` *filename*
:   sends output to *filename*. If this option is not specified,
    or if its argument is `-`, output will be sent to stdout.
    (Exception: if the output format is `odt`, output to stdout
    is disabled.)

`-p` or `--preserve-tabs`
:   causes tabs in the source text to be preserved, rather than converted
    to spaces (the default).

`--tab-stop` *tabstop*
:   sets the number of spaces per tab to *tabstop* (defaults to 4).

`--strict`
:   specifies that strict markdown syntax is to be used, without
    pandoc's usual extensions and variants (described below).  When the
    input format is HTML, this means that constructs that have no
    equivalents in standard markdown (e.g. definition lists or strikeout
    text) will be parsed as raw HTML.

`--reference-links`
:   causes reference-style links to be used in markdown 
    and reStructuredText output.  By default inline links are used.

`-R` or `--parse-raw`
:   causes the HTML and LaTeX readers to parse HTML codes and LaTeX
    environments that it can't translate as raw HTML or LaTeX. Raw HTML can
    be printed in markdown, reStructuredText, HTML, and S5 output; raw LaTeX
    can be printed in markdown, reStructuredText, LaTeX, and ConTeXt output.
    The default is for the readers to omit untranslatable HTML codes and
    LaTeX environments. (The LaTeX reader does pass through untranslatable
    LaTeX *commands*, even if `-R` is not specified.)

`-C` or `--custom-header` *filename*
:   can be used to specify a custom document header. Implies `--standalone`.
    *Note: this option is deprecated. Use of `--template` is preferred.*

`--toc` or `--table-of-contents`
:   includes an automatically generated table of contents (or, in the
    case of `latex`, `context`, and `rst`, an instruction to create
    one) in the output document. This option has no effect with `man`,
    `docbook`, or `s5` output formats.

`--template=`*file*
:   uses *file* as a custom template for the generated document. Implies
    `-s`. See [Templates](#templates) below for a description
    of template syntax. If this option is not used, a default
    template appropriate for the output format will be used. See also
    `-D/--print-default-template`.

`-V` *key=val*, `--variable=`*key:val*
:   sets the template variable *key* to the value *val* when rendering the
    document in standalone mode. This is only useful when the
    `--template` option is used to specify a custom template, since
    pandoc automatically sets the variables used in the default
    templates.

`-c` or `--css` *filename*
:   allows the user to specify a custom stylesheet that will be linked to
    in HTML and S5 output.  This option can be used repeatedly to include
    multiple stylesheets. They will be included in the order specified.
    Implies `--standalone`.

`-H` or `--include-in-header` *filename*
:   includes the contents of *filename* (verbatim) at the end of the
    document header. This can be used, for example, to include special
    CSS or javascript in HTML documents.  This option can be used
    repeatedly to include multiple files in the header.  They will be
    included in the order specified.  Implies `--standalone`.

`-B` or `--include-before-body` *filename*
:   includes the contents of *filename* (verbatim) at the beginning of
    the document body (e.g. after the `<body>` tag in HTML, or the
    `\begin{document}` command in LaTeX). This can be used to include
    navigation bars or banners in HTML documents. This option can be
    used repeatedly to include multiple files. They will be included in
    the order specified.

`-A` or `--include-after-body` *filename*
:   includes the contents of *filename* (verbatim) at the end of
    the document body (before the `</body>` tag in HTML, or the
    `\end{document}` command in LaTeX). This option can be be used
    repeatedly to include multiple files. They will be included in the
    order specified.

`--reference-odt` *filename*
:   uses the specified file as a style reference in producing an ODT.
    For best results, the reference ODT should be a modified version
    of an ODT produced using pandoc.  The contents of the reference ODT
    are ignored, but its stylesheets are used in the new ODT. If no
    reference ODT is specified on the command line, pandoc will look
    for a file `reference.odt` in the user data directory (see
    `--data-dir`, below). If it is not found there, sensible defaults
    will be used.

`-D` or `--print-default-template` *format*
:   prints the default template for an output *format*. (See `-t`
    for a list of possible *format*s.)

`-T` or `--title-prefix` *string*
:   includes *string* as a prefix at the beginning of the title that
    appears in the HTML header (but not in the title as it appears at
    the beginning of the HTML body). (See below on
    [Title Blocks](#title-blocks).)  Implies `--standalone`.

`-S` or `--smart`
:   causes `pandoc` to produce typographically correct output, along the
    lines of John Gruber's [Smartypants]. Straight quotes are converted
    to curly quotes, `---` to dashes, and `...` to ellipses. Nonbreaking
    spaces are inserted after certain abbreviations, such as "Mr."
    (Note: This option is only significant when the input format is
    `markdown`. It is selected automatically when the output format is
    `latex` or `context`.)

`-m`*[url]* or `--latexmathml`*[=url]*
:   causes `pandoc` to use the [LaTeXMathML] script to display
    TeX math in HTML or S5. If a local copy of `LaTeXMathML.js` is
    available on the webserver where the page will be viewed, provide a
    *url* and a link will be inserted in the generated HTML or S5. If
    no *url* is provided, the contents of the script will be inserted
    directly; this provides portability at the price of efficiency. If
    you plan to use math on several pages, it is much better to link to
    a copy of `LaTeXMathML.js`, which can be cached.  (See `--jsmath`,
    `--gladtex`, and `--mimetex` for alternative ways of dealing with
    math in HTML.)

`--jsmath`*=[url]*
:   causes `pandoc` to use the [jsMath] script to display
    TeX math in HTML or S5. The *url* should point to the jsMath load
    script (e.g. `jsMath/easy/load.js`). If it is provided, a link to it
    will be included in the header of standalone HTML documents.
    (See `--latexmathml`, `--mimetex`, and `--gladtex` for alternative
    ways of dealing with math in HTML.)

`--gladtex`*[=url]*
:   causes TeX formulas to be enclosed in `<eq>` tags in HTML or S5 output.
    This output can then be processed by [gladTeX] to produce links to
    images with the typeset formulas.  (See `--latexmathml`, `--jsmath`, and
    `--mimetex` for alternative ways of dealing with math in HTML.)

`--mimetex`*[=url]*
:   causes TeX formulas to be replaced by `<img>` tags linking to the
    [mimeTeX] CGI script, which will produce images with the typeset
    formulas.  (See `--latexmathml`, `--jsmath`, and `--gladtex` for alternative
    ways of dealing with math in HTML.)

`-i` or `--incremental`
:   causes all lists in S5 output to be displayed incrementally by
    default (one item at a time). The normal default is for lists to be
    displayed all at once.

`--xetex`
:   creates LaTeX outut suitable for processing by XeTeX.

`-N` or `--number-sections`
:   causes sections to be numbered in LaTeX, ConTeXt, or HTML output.
    By default, sections are not numbered.

`--no-wrap`
:   disables text-wrapping in output.  By default, text is wrapped
    appropriately for the output format.

`--sanitize-html`
:   sanitizes HTML (in markdown or HTML input) using a whitelist.
    Unsafe tags are replaced by HTML comments; unsafe attributes
    are omitted. URIs in links and images are also checked against a
    whitelist of URI schemes.

`--email-obfuscation`*=none|javascript|references*
:   specifies a method for obfuscating `mailto:` links in HTML documents.
    *none* leaves `mailto:` links as they are.  *javascript* obfuscates
    them using javascript. *references* obfuscates them by printing their
    letters as decimal or hexadecimal character references.  If `--strict`
    is specified, *references* is used regardless of the presence
    of this option.

`--id-prefix`*=string*
:   specifies a prefix to be added to all automatically generated identifiers
    in HTML output.  This is useful for preventing duplicate identifiers
    when generating fragments to be included in other pages.

`--indented-code-classes`*=classes*
:   specifies classes to use for indented code blocks--for example,
    `perl,numberLines` or `haskell`. Multiple classes may be separated
    by spaces or commas.

`--data-dir`*=directory*
:   specifies the user data directory to search for pandoc data files.
    If this option is not specified, the default user data directory
    will be used:

        $HOME/.pandoc

    in unix and

        C:\Documents And Settings\USERNAME\Application Data\pandoc

    in Windows. A reference ODT, `templates` directory, `s5` directory
    placed in this directory will override pandoc's normal defaults.

`--dump-args`
:   is intended to make it easier to create wrapper scripts that use
    Pandoc. It causes Pandoc to dump information about the arguments
    with which it was called to stdout, then exit. The first line
    printed is the name of the output file specified using the `-o`
    or `--output` option, or `-` if output would go to stdout. The
    remaining lines, if any, list command-line arguments. These will
    include the names of input files and any special options passed
    after ` -- ` on the command line. So, for example,

:       pandoc --dump-args -o foo.html -s foo.txt \
          appendix.txt -- -e latin1

:   will cause the following to be printed to stdout:

:       foo.html foo.txt appendix.txt -e latin1

`--ignore-args`
:   causes Pandoc to ignore all command-line arguments.
    Regular Pandoc options are not ignored.  Thus, for example,

:       pandoc --ignore-args -o foo.html -s foo.txt -- -e latin1

:   is equivalent to

:       pandoc -o foo.html -s   

`-v` or `--version`
:   prints the version number to STDERR.

`-h` or `--help`
:   prints a usage message to STDERR.

[Smartypants]: http://daringfireball.net/projects/smartypants/
[LaTeXMathML]: http://math.etsu.edu/LaTeXMathML/
[jsMath]:  http://www.math.union.edu/~dpvc/jsmath/
[gladTeX]:  http://www.math.uio.no/~martingu/gladtex/index.html
[mimeTeX]: http://www.forkosh.com/mimetex.html 

Templates
=========

When the `-s/--standalone` option is used, pandoc uses a template to
add header and footer material that is needed for a self-standing
document.  To see the default template that is used, just type

    pandoc -D FORMAT

where `FORMAT` is the name of the output format. A custom template
can be specified using the `--template` option.  You can also override
the system default templates for a given output format `FORMAT`
by putting a file `templates/FORMAT.template` in the user data
directory (see `--data-dir`, above).

Templates may contain *variables*.  Variable names are sequences of
alphanumerics, `-`, and `_`, starting with a letter.  A variable name
surrounded by `$` signs will be replaced by its value.  For example,
the string `$title$` in

    <title>$title$</title>

will be replaced by the document title.

To write a literal `$` in a template, use `$$`.

Some variables are set automatically by pandoc.  These vary somewhat
depending on the output format, but include:

`legacy-header`
:   contents specified by `-C/--custom-header`
`header-includes`
:   contents specified by `-H/--include-in-header` (may have multiple
    values)
`toc`
:   non-null value if `--toc/--table-of-contents` was specified
`body`
:   body of document
`title`
:   title of document, as specified in title block
`author`
:   author of document, as specified in title block (may have
    multiple values)
`date`
:   date of document, as specified in title block

Variables may be set at the command line using the `-V/--variable`
option. This allows users to include custom variables in their
templates.

Templates may contain conditionals.  The syntax is as follows:

    $if(variable)$
    X
    $else$
    Y
    $endif$

This will include `X` in the template if `variable` has a non-null
value; otherwise it will include `Y`. `X` and `Y` are placeholders for
any valid template text, and may include interpolated variables or other
conditionals. The `$else$` section may be omitted.

When variables can have multiple values (for example, `author` in
a multi-author document), you can use the `$for$` keyword:

    $for(author)$
    <meta name="author" content="$author$" />
    $endfor$

You can optionally specify a separator to be used between
consecutive items:

    $for(author)$$author$$sep$, $endfor$

Pandoc's markdown vs. standard markdown
=======================================

In parsing markdown, Pandoc departs from and extends [standard markdown]
in a few respects.  Except where noted, these differences can
be suppressed by specifying the `--strict` command-line option.

[standard markdown]:  http://daringfireball.net/projects/markdown/syntax
  "Markdown syntax description"

Backslash escapes
-----------------

Except inside a code block or inline code, any punctuation or space
character preceded by a backslash will be treated literally, even if it
would normally indicate formatting.  Thus, for example, if one writes

    *\*hello\**

one will get

    <em>*hello*</em>

instead of

    <strong>hello</strong>

This rule is easier to remember than standard markdown's rule,
which allows only the following characters to be backslash-escaped:

    \`*_{}[]()>#+-.!

A backslash-escaped space is parsed as a nonbreaking space.  It will
appear in TeX output as '`~`' and in HTML and XML as '`\&#160;`' or
'`\&nbsp;`'.

A backslash-escaped newline (i.e. a backslash occurring at the end of
a line) is parsed as a hard line break.  It will appear in TeX output as
'`\\`' and in HTML as '`<br />`'.  This is a nice alternative to
markdown's "invisible" way of indicating hard line breaks using
two trailing spaces on a line.

Subscripts and superscripts
---------------------------

Superscripts may be written by surrounding the superscripted text by `^`
characters; subscripts may be written by surrounding the subscripted
text by `~` characters.  Thus, for example,

    H~2~O is a liquid.  2^10^ is 1024.

If the superscripted or subscripted text contains spaces, these spaces
must be escaped with backslashes.  (This is to prevent accidental
superscripting and subscripting through the ordinary use of `~` and `^`.)
Thus, if you want the letter P with 'a cat' in subscripts, use
`P~a\ cat~`, not `P~a cat~`.

Strikeout
---------

To strikeout a section of text with a horizontal line, begin and end it
with `~~`. Thus, for example,

    This ~~is deleted text.~~

Nested Lists
------------

Pandoc behaves differently from standard markdown on some "edge
cases" involving lists.  Consider this source: 

	1.  First
	2.  Second:
		-   Fee
		-   Fie
		-   Foe

	3.  Third

Pandoc transforms this into a "compact list" (with no `<p>` tags around
"First", "Second", or "Third"), while markdown puts `<p>` tags around
"Second" and "Third" (but not "First"), because of the blank space
around "Third". Pandoc follows a simple rule: if the text is followed by
a blank line, it is treated as a paragraph. Since "Second" is followed
by a list, and not a blank line, it isn't treated as a paragraph. The
fact that the list is followed by a blank line is irrelevant. (Note:
Pandoc works this way even when the `--strict` option is specified. This
behavior is consistent with the official markdown syntax description,
even though it is different from that of `Markdown.pl`.)

Ordered Lists
-------------

Unlike standard markdown, Pandoc allows ordered list items to be marked
with uppercase and lowercase letters and roman numerals, in addition to
arabic numerals. (This behavior can be turned off using the `--strict`
option.) List markers may be enclosed in parentheses or followed by a
single right-parentheses or period. They must be separated from the
text that follows by at least one space, and, if the list marker is a
capital letter with a period, by at least two spaces.[^2]

[^2]:  The point of this rule is to ensure that normal paragraphs
    starting with people's initials, like

        B. Russell was an English philosopher.

    do not get treated as list items.

    This rule will not prevent

        (C) 2007 Joe Smith

    from being interpreted as a list item.  In this case, a backslash
    escape can be used:

        (C\) 2007 Joe Smith
    
Pandoc also pays attention to the type of list marker used, and to the
starting number, and both of these are preserved where possible in the
output format. Thus, the following yields a list with numbers followed
by a single parenthesis, starting with 9, and a sublist with lowercase
roman numerals:

     9)  Ninth
    10)  Tenth
    11)  Eleventh
           i. subone
          ii. subtwo
         iii. subthree

Note that Pandoc pays attention only to the *starting* marker in a list.
So, the following yields a list numbered sequentially starting from 2:

    (2) Two
    (5) Three
    1.  Four
    *   Five

If default list markers are desired, use '`#.`':

    #.  one
    #.  two
    #.  three

Definition lists
----------------

Pandoc supports definition lists, using a syntax inspired by
[PHP Markdown Extra] and [reStructuredText]:[^3]

    Term 1

    :   Definition 1

    Term 2 with *inline markup*

    :   Definition 2

            { some code, part of Definition 2 }

        Third paragraph of definition 2.

Each term must fit on one line, which may optionally be followed by
a blank line, and must be followed by one or more definitions.
A definition begins with a colon or tilde, which may be indented one
or two spaces. A term may have multiple definitions, and each definition
may consist of one or more block elements (paragraph, code block, list,
etc.), each indented four spaces or one tab stop.

If you leave space after the definition (as in the example above),
the blocks of the definitions will be considered paragraphs. In some
output formats, this will mean greater spacing between term/definition
pairs. For a compact definition list, do not leave space between the
definition and the next term:

    Term 1
      ~ Definition 1
    Term 2
      ~ Definition 2a
      ~ Definition 2b

[^3]:  I have also been influenced by the suggestions of [David Wheeler](http://www.justatheory.com/computers/markup/modest-markdown-proposal.html).

[PHP Markdown Extra]: http://www.michelf.com/projects/php-markdown/extra/

Reference links
---------------

Pandoc allows implicit reference links with just a single set of
brackets.  So, the following links are equivalent:

	1. Here's my [link]
	2. Here's my [link][]

	[link]: linky.com

(Note:  Pandoc works this way even if `--strict` is specified, because
`Markdown.pl` 1.0.2b7 allows single-bracket links.)

Footnotes
---------

Pandoc's markdown allows footnotes, using the following syntax:

	Here is a footnote reference,[^1] and another.[^longnote]

	[^1]: Here is the footnote.

	[^longnote]: Here's one with multiple blocks.

        Subsequent paragraphs are indented to show that they 
    belong to the previous footnote.

            { some.code }

	    The whole paragraph can be indented, or just the first
        line.  In this way, multi-paragraph footnotes work like
	    multi-paragraph list items.

    This paragraph won't be part of the note, because it isn't indented.

The identifiers in footnote references may not contain spaces, tabs,
or newlines.  These identifiers are used only to correlate the
footnote reference with the note itself; in the output, footnotes
will be numbered sequentially.

The footnotes themselves need not be placed at the end of the
document.  They may appear anywhere except inside other block elements
(lists, block quotes, tables, etc.).

Inline footnotes are also allowed (though, unlike regular notes,
they cannot contain multiple paragraphs).  The syntax is as follows:

    Here is an inline note.^[Inlines notes are easier to write, since
    you don't have to pick an identifier and move down to type the
    note.]

Inline and regular footnotes may be mixed freely.

Tables
------

Two kinds of tables may be used.  Both kinds presuppose the use of
a fixed-width font, such as Courier.

Simple tables look like this:

      Right     Left     Center     Default
    -------     ------ ----------   -------
         12     12        12            12
        123     123       123          123
          1     1          1             1

    Table:  Demonstration of simple table syntax.

The headers and table rows must each fit on one line.  Column
alignments are determined by the position of the header text relative
to the dashed line below it:[^4]

  - If the dashed line is flush with the header text on the right side
    but extends beyond it on the left, the column is right-aligned.
  - If the dashed line is flush with the header text on the left side 
    but extends beyond it on the right, the column is left-aligned.
  - If the dashed line extends beyond the header text on both sides,
    the column is centered.
  - If the dashed line is flush with the header text on both sides,
    the default alignment is used (in most cases, this will be left).

[^4]:  This scheme is due to Michel Fortin, who proposed it on the
       [Markdown discussion list](http://six.pairlist.net/pipermail/markdown-discuss/2005-March/001097.html).

The table must end with a blank line, or a line of dashes followed by
a blank line. A caption may optionally be provided (as illustrated in
the example above). A caption is a paragraph beginning with the string
`Table:`, which will be stripped off.

The column headers may be omitted, provided a dashed line is used
to end the table. For example:

    -------     ------ ----------   -------
         12     12        12             12
        123     123       123           123
          1     1          1              1
    -------     ------ ----------   -------

When headers are omitted, column alignments are determined on the basis
of the first line of the table body. So, in the tables above, the columns
would be right, left, center, and right aligned, respectively.

Multiline tables allow headers and table rows to span multiple lines
of text.  Here is an example:

    -------------------------------------------------------------
     Centered   Default           Right Left
      Header    Aligned         Aligned Aligned
    ----------- ------- --------------- -------------------------
       First    row                12.0 Example of a row that
                                        spans multiple lines.

      Second    row                 5.0 Here's another one. Note
                                        the blank line between
                                        rows.
    -------------------------------------------------------------

    Table: Here's the caption. It, too, may span
    multiple lines.

These work like simple tables, but with the following differences:

  - They must begin with a row of dashes, before the header text
    (unless the headers are omitted).
  - They must end with a row of dashes, then a blank line.
  - The rows must be separated by blank lines.

In multiline tables, the table parser pays attention to the widths of
the columns, and the writers try to reproduce these relative widths in
the output. So, if you find that one of the columns is too narrow in the
output, try widening it in the markdown source.

Headers may be omitted in multiline tables as well as simple tables:

    ----------- ------- --------------- -------------------------
       First    row                12.0 Example of a row that
                                        spans multiple lines.

      Second    row                 5.0 Here's another one. Note
                                        the blank line between
                                        rows.
    -------------------------------------------------------------

    Table: Here's a multiline table without headers.

It is possible for a multiline table to have just one row, but the row
should be followed by a blank line (and then the row of dashes that ends
the table), or the table may be interpreted as a simple table.

Delimited Code blocks
---------------------

In addition to standard indented code blocks, Pandoc supports
*delimited* code blocks.  These begin with a row of three or more
tildes (`~`) and end with a row of tildes that must be at least
as long as the starting row.  Everything between the tilde-lines
is treated as code.  No indentation is necessary:

    ~~~~~~~
    {code here}
    ~~~~~~~

Like regular code blocks, delimited code blocks must be separated
from surrounding text by blank lines.

If the code itself contains a row of tildes, just use a longer
row of tildes at the start and end:

    ~~~~~~~~~~~~~~~~
    ~~~~~~~~~~
    code including tildes
    ~~~~~~~~~~
    ~~~~~~~~~~~~~~~~

Optionally, you may specify the language of the code block using
this syntax:

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ {.haskell .numberLines}
    qsort []     = []
    qsort (x:xs) = qsort (filter (< x) xs) ++ [x] ++
                   qsort (filter (>= x) xs) 
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Some output formats can use this information to do syntax highlighting.
Currently, the only output format that uses this information is HTML.

If pandoc has been compiled with syntax highlighting support, then the
code block above will appear highlighted, with numbered lines.  (To see
which languages are supported, do `pandoc --version`.)

If pandoc has not been compiled with syntax highlighting support, the
code block above will appear as follows:

    <pre class="haskell">
      <code>
      ...
      </code>
    </pre>

Title blocks
------------

If the file begins with a title block

	% title
	% author(s) (separated by semicolons)
	% date

it will be parsed as bibliographic information, not regular text.  (It
will be used, for example, in the title of standalone LaTeX or HTML
output.)  The block may contain just a title, a title and an author,
or all three lines.  Each must begin with a % and fit on one line.
The title may contain standard inline formatting.  If you want to
include an author but no title, or a title and a date but no author,
you need a blank line:

	% My title
	% 
	% June 15, 2006

Titles will be written only when the `--standalone` (`-s`) option is
chosen.  In HTML output, titles will appear twice: once in the
document head -- this is the title that will appear at the top of the
window in a browser -- and once at the beginning of the document body.
The title in the document head can have an optional prefix attached
(`--title-prefix` or `-T` option).  The title in the body appears as
an H1 element with class "title", so it can be suppressed or
reformatted with CSS. If a title prefix is specified with `-T` and no
title block appears in the document, the title prefix will be used by
itself as the HTML title.

The man page writer extracts a title, man page section number, and
other header and footer information from the title line. The title
is assumed to be the first word on the title line, which may optionally
end with a (single-digit) section number in parentheses. (There should
be no space between the title and the parentheses.)  Anything after
this is assumed to be additional footer and header text. A single pipe
character (`|`) should be used to separate the footer text from the header
text.  Thus,

    % PANDOC(1)

will yield a man page with the title `PANDOC` and section 1.

    % PANDOC(1) Pandoc User Manuals

will also have "Pandoc User Manuals" in the footer.

    % PANDOC(1) Pandoc User Manuals | Version 4.0

will also have "Version 4.0" in the header.

Markdown in HTML blocks
-----------------------

While standard markdown leaves HTML blocks exactly as they are, Pandoc
treats text between HTML tags as markdown. Thus, for example, Pandoc
will turn

	<table>
		<tr>
			<td>*one*</td>
			<td>[a link](http://google.com)</td>
		</tr>
	</table>

into

	<table>
		<tr>
			<td><em>one</em></td>
			<td><a href="http://google.com">a link</a></td>
		</tr>
	</table>

whereas `Markdown.pl` will preserve it as is.

There is one exception to this rule:  text between `<script>` and
`</script>` tags is not interpreted as markdown.

This departure from standard markdown should make it easier to mix
markdown with HTML block elements.  For example, one can surround
a block of markdown text with `<div>` tags without preventing it
from being interpreted as markdown.

Header identifiers in HTML
--------------------------

Each header element in pandoc's HTML output is given a unique
identifier. This identifier is based on the text of the header. To
derive the identifier from the header text,

  - Remove all formatting, links, etc.
  - Remove all punctuation, except underscores, hyphens, periods,
    and tildes.
  - Replace all spaces and newlines with hyphens.
  - Convert all alphabetic characters to lowercase.
  - Remove everything up to the first letter (identifiers may
    not begin with a number or punctuation mark).
  - If nothing is left after this, use the identifier `section`.

Thus, for example,

  Header                                  Identifier
  -------------------------------------   ---------------------------
  Header identifiers in HTML              `header-identifiers-in-html`
  *Dogs*?--in *my* house?                 `dogs--in-my-house`
  [HTML], [S5], or [RTF]?                 `html-s5-or-rtf`
  3. Applications                         `applications`
  33                                      `section`

These rules should, in most cases, allow one to determine the identifier
from the header text. The exception is when several headers have the
same text; in this case, the first will get an identifier as described
above; the second will get the same identifier with `-1` appended; the
third with `-2`; and so on.

These identifiers are used to provide link targets in the table of
contents generated by the `--toc|--table-of-contents` option. They
also make it easy to provide links from one section of a document to
another. A link to this section, for example, might look like this:

    See the section on [header identifiers](#header-identifiers-in-html). 

Note, however, that this method of providing links to sections works
only in HTML.

Blank lines before headers and blockquotes
------------------------------------------

Standard markdown syntax does not require a blank line before a header
or blockquote.  Pandoc does require this (except, of course, at the
beginning of the document). The reason for the requirement is that
it is all too easy for a `>` or `#` to end up at the beginning of a
line by accident (perhaps through line wrapping).  Consider, for
example:

    I like several of their flavors of ice cream:  #22, for example, and
    #5.

Math
----

Anything between two $ characters will be treated as TeX math.  The
opening $ must have a character immediately to its right, while the
closing $ must have a character immediately to its left.  Thus,
`$20,000 and $30,000` won't parse as math.  If for some reason
you need to enclose text in literal $ characters, backslash-escape
them and they won't be treated as math delimiters.

TeX math will be printed in all output formats. In Markdown,
reStructuredText, LaTeX, and ConTeXt output, it will appear verbatim
between $ characters.

In reStructuredText output, it will be rendered using an interpreted
text role `:math:`, as described
[here](http://www.american.edu/econ/itex2mml/mathhack.rst).

In Texinfo output, it will be rendered inside a `@math` command.

In groff man output, it will be rendered verbatim without $'s.

In MediaWiki output, it will be rendered inside `<math>` tags.

In RTF, Docbook, and OpenDocument output, it will be rendered, as far as
possible, using unicode characters, and will otherwise appear verbatim.
Unknown commands and symbols, and commands that cannot be dealt with
this way (like `\frac`), will be rendered verbatim. So the results may
be a mix of raw TeX code and properly rendered unicode math.

In HTML and S5 output, the way math is rendered will depend on the
command-line options selected:

1.  The default is to render TeX math as far as possible using unicode
    characters, as with RTF, Docbook, and OpenDocument output. Formulas
    are put inside a `span` with `class="math"`, so that they may be
    styled differently from the surrounding text if needed.

2.  If the `--latexmathml` option is used, TeX math will be displayed
    between $ or $$ characters and put in `<span>` tags with class `LaTeX`.
    The [LaTeXMathML] script will be used to render it as formulas.
    (This trick does not work in all browsers, but it works in Firefox.
    In browsers that do not support LaTeXMathML, TeX math will appear
    verbatim between $ characters.)

3.  If the `--jsmath` option is used, TeX math will be put inside
    `<span>` tags (for inline math) or `<div>` tags (for display math)
    with class `math`.  The [jsMath] script will be used to render
    it.

4.  If the `--mimetex` option is used, the [mimeTeX] CGI script will
    be called to generate images for each TeX formula. This should
    work in all browsers. The `--mimetex` option takes an optional URL
    as argument. If no URL is specified, it will be assumed that the
    mimeTeX CGI script is at `/cgi-bin/mimetex.cgi`.

5.  If the `--gladtex` option is used, TeX formulas will be enclosed
    in `<eq>` tags in the HTML output.  The resulting `htex` file may then
    be processed by [gladTeX], which will produce image files for each
    formula and an `html` file with links to these images.  So, the
    procedure is:

        pandoc -s --gladtex myfile.txt -o myfile.htex
        gladtex -d myfile-images myfile.htex  # produces myfile.html
                                              # and images in myfile-images

Inline TeX
----------

Inline TeX commands will be preserved and passed unchanged to the
LaTeX and ConTeXt writers. Thus, for example, you can use LaTeX to
include BibTeX citations:

	This result was proved in \cite{jones.1967}.

Note that in LaTeX environments, like

	\begin{tabular}{|l|l|}\hline
	Age & Frequency \\ \hline
	18--25  & 15 \\
	26--35  & 33 \\ 
	36--45  & 22 \\ \hline
	\end{tabular}

the material between the begin and end tags will be interpreted as raw
LaTeX, not as markdown.

Inline LaTeX is ignored in output formats other than Markdown, LaTeX,
and ConTeXt.

Producing S5 with Pandoc
========================

Producing an [S5] web-based slide show with Pandoc is easy.  A title
page is constructed automatically from the document's title block (see
above).  Each section (with a level-one header) produces a single slide.
(Note that if the section is too big, the slide will not fit on the page;
S5 is not smart enough to produce multiple pages.)

Here's the markdown source for a simple slide show, `eating.txt`:

	% Eating Habits
	% John Doe
	% March 22, 2005

	# In the morning

	- Eat eggs
	- Drink coffee

	# In the evening

	- Eat spaghetti
	- Drink wine

To produce the slide show, simply type

	pandoc -w s5 -s eating.txt > eating.html

and open up `eating.html` in a browser.

Note that by default, the S5 writer produces lists that display
"all at once."  If you want your lists to display incrementally
(one item at a time), use the `-i` option.  If you want a
particular list to depart from the default (that is, to display
incrementally without the `-i` option and all at once with the
`-i` option), put it in a block quote:

	> - Eat spaghetti
	> - Drink wine

In this way incremental and nonincremental lists can be mixed in
a single document.

Note: the S5 file produced by pandoc with the `-s/--standalone` option
embeds the javascript and CSS required to show the slides. Thus it
does not depend on any additional files: you can send the HTML file to
others, and they will be able to view the slide show just by opening
it. However, if you intend to produce several S5 slide shows, and you
are displaying them on your own website, it is better to keep the S5
javascript and CSS files separate from the slide shows themselves, so
that they may be cached. The best approach in this case is to use pandoc
without the `-s` option to produce the body of the S5 document, which
can then be inserted into an HTML template that links to the javascript
and CSS files required by S5. (See the instructions on the S5 website.)
Alternatively, you may use `-s` together with the `--template`
option to specify a custom template.

You can change the style of the slides by putting customized CSS files
in `$DATADIR/s5/default`, where `$DATADIR` is the user data directory
(see `--data-dir`, above). The originals may be found in pandoc's system
data directory (generally `$CABALDIR/pandoc-VERSION/s5/default`). Pandoc
will look there for any files it does not find in the user data
directory.

Literate Haskell support
========================

If you append `+lhs` to an appropriate input or output format (`markdown`,
`rst`, or `latex` for input or output; `html` for output only), pandoc
will treat the document as literate Haskell source. This means that

  - In markdown input, "bird track" sections will be parsed as Haskell
    code rather than block quotations.  Text between `\begin{code}`
    and `\end{code}` will also be treated as Haskell code.

  - In markdown output, code blocks with class `haskell` will be
    rendered using bird tracks, and block quotations will be
    indented one space, so they will not be treated as Haskell code.
    In addition, headers will be rendered setext-style (with underlines)
    rather than atx-style (with '#' characters). (This is because ghc
    treats '#' characters in column 1 as introducing line numbers.)

  - In restructured text input, "bird track" sections will be parsed
    as Haskell code.

  - In restructured text output, code blocks with class `haskell` will
    be rendered using bird tracks.

  - In LaTeX input, text in `code` environments will be parsed as
    Haskell code.

  - In LaTeX output, code blocks with class `haskell` will be rendered
    inside `code` environments.

  - In HTML output, code blocks with class `haskell` will be rendered
    with class `literatehaskell` and bird tracks.

Examples:

    pandoc -f markdown+lhs -t html

reads literate Haskell source formatted with markdown conventions and writes
ordinary HTML (without bird tracks).

    pandoc -f markdown+lhs -t html+lhs

writes HTML with the Haskell code in bird tracks, so it can be copied
and pasted as literate Haskell source.