| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
- Support -i option
- Support incremental/noincremental divs
- Support older block quote syntax
- Add tests
One thing not clear from the manual is what should happen when the input
uses a combination of these things. For example, what should the
following produce?
```md
::: {.incremental .nonincremental}
- are
- these
- incremental?
:::
::: incremental
::::: nonincremental
- or
- these?
:::::
:::
::: nonincremental
> - how
> - about
> - these?
:::
```
In this commit I’ve taken the following approach, matching the observed
behaviour for beamer and reveal.js output:
- if a div with both classes, incremental wins
- the innermost incremental/nonincremental div is the one which takes
effect
- a block quote containing a list as its first element inverts whether
the list is incremental, whether or not the quote is inside an
incremental/non-incremental div
I’ve added some tests to verify this behaviour.
This commit closes issue #5689
(https://github.com/jgm/pandoc/issues/5689).
|
|
Cloess #7568.
|
|
There was a mistake in the logic used to choose between the Comparison
and Two Content layouts: if one column contained only non-text (an image
or a table) and the other contained only text, the Comparison layout was
chosen instead of the desired Two Content layout.
This commit fixes that logic:
> If either column contains text followed by non-text, use Comparison.
Otherwise, use Two Content.
It also adds a test asserting this behaviour.
|
|
If the image has the id IMAGEID, then we use the id ref_IMAGEID
for the figure number. Closes #7551.
This allows one to create a filter that adds a figure number
with figure name, e.g.
<w:fldSimple w:instr=" REF ref_superfig "><w:r><w:t>Figure X</w:t></w:r></w:fldSimple>
For this to be possible it must be possible to predict the
figure number id from the image id.
If images lack an id, an id of the form `ref_fig1` is used.
|
|
- Accept test changes: they’re adding the second theme (for all tests
not containing speaker notes), or changing its position in the
XML (for the ones containing speaker notes).
|
|
I don’t think this has caused any problems, but before now it’s been
"NotesMasterId", which is incorrect according to [ECMA-376].
[ECMA-376]: https://www.ecma-international.org/publications-and-standards/standards/ecma-376/
|
|
|
|
Closes #7557.
|
|
The HTML writer now supports `EndOfBlock`, `EndOfSection`, and
`EndOfDocument` for reference locations. EPUB and HTML slide
show formats are also affected by this change.
This works similarly to the markdown writer, but with special care
taken to skipping section divs with what regards to the block level.
The change also takes care to not modify the output if `EndOfDocument`
is used.
|
|
We now ensure that groups starting with `\*` never cause
text to be added to the document.
In addition, bookmarks now create a span between the start
and end of the bookmark, rather than an empty span.
|
|
Until now, the pptx writer only supported four slide layouts: “Title
Slide” (used for the automatically generated metadata slide), “Section
Header” (used for headings above the slide level), “Two Column” (used
when there’s a columns div containing at least two column divs), and
“Title and Content” (used for all other slides).
This commit adds support for three more layouts: Comparison, Content
with Caption, and Blank.
- Support “Comparison” slide layout
This layout is used when a slide contains at least two columns, at
least one of which contains some text followed by some non-text (e.g.
an image or table). The text in each column is inserted into the
“body” placeholder for that column, and the non-text is inserted into
the ObjType placeholder. Any extra content after the non-text is
overlaid on top of the preceding content, rather than dropping it
completely (as currently happens for the two-column layout).
+ Accept straightforward test changes
Adding the new layout means the “-deleted-layouts” tests have an
additional layout added to the master and master rels.
+ Add new tests for the comparison layout
+ Add new tests to pandoc.cabal
- Support “Content with Caption” slide layout
This layout is used when a slide’s body contains some text, followed by
non-text (e.g. and image or a table). Before now, in this case the image
or table would break onto a new slide: to get that output again, users
can add a horizontal rule before the image or table.
+ Accept straightforward tests
The “-deleted-layouts” tests all have an extra layout and relationship
in the master for the Content with Caption layout.
+ Accept remove-empty-slides test
Empty slides are still removed, but the Content with Caption layout is
now used.
+ Change slide-level-0/h1-h2-with-text description
This test now triggers the content with caption layout, giving a
different (but still correct) result.
+ Add new tests for the new layout
+ Add new tests to the cabal file
- Support “Blank” slide layout
This layout is used when a slide contains only blank content (e.g.
non-breaking spaces). No content is inserted into any placeholders in
the layout.
Fixes #5097.
+ Accept straightforward test changes
Blank layout now copied over from reference doc as well, when
layouts have been deleted.
+ Add some new tests
A slide should use the blank layout if:
- It contains only speaker notes
- It contains only an empty heading with a body of nbsps
- It contains only a heading containing only nbsps
- Change ContentType -> Placeholder
This type was starting to have a constructor for each placeholder on
each slide (e.g. `ComparisonUpperLeftContent`). I’ve changed it
instead to identify a placeholder by type and index, as I think that’s
clearer and less redundant.
- Describe layout-choosing logic in manual
|
|
- Use dashes consistently rather than underscores
- Make a folder for each set of tests
- List test files explicitly (Cabal doesn’t support ** until version
2.4)
|
|
|
|
Before this commit, the pptx writer adds a slide break before any table,
“columns” div, or paragraph starting with an image, unless the only
thing before it on the same slide is a heading at the slide level. In
that case, the item and heading are kept on the same slide, and the
heading is used as the slide title (inserted into the layout’s “title”
placeholder).
However, if the slide level is set to 0 (as was recently enabled) this
makes it impossible to have a slide with a title which contains any of
those items in its body.
This commit changes this behaviour: now if the slide level is 0, then
items will be kept with a heading of any level, if the heading’s the
only thing before the item on the same slide.
|
|
This will, I hope, fix #7527 and #7503.
|
|
|
|
parsing. Use of `--strip-comments` was causing tight lists
to be rendered as loose (as if the comment were a blank line).
Closes #7521.
|
|
|
|
These should create code blocks, not insert raw RST.
Closes #7513.
|
|
The image title (i.e. ``) was previously
ignored when writing to pptx. This commit includes it in PowerPoint's
description of the image, along with the link (which was already
included).
Fixes 7352.
|
|
Linkification of URLs in the bibliography is now done in
the citeproc library, depending on the setting of an option.
We set that option depending on the value of the metadata
field `link-bibliography` (defaulting to true, for consistency
with earlier behavior, though the new behavior includes the
CSL draft recommendation of hyperlinking the title or the whole
entry if a DOI, PMID, PMCID, or URL field is present but not
explicitly rendered).
These changes implement the following recommendations from the
draft CSL v1.0.2 spec (Appendix VI):
> The CSL syntax does not have support for configuration of links.
> However, processors should include links on bibliographic references,
> using the following rules:
> If the bibliography entry for an item renders any of the following
> identifiers, the identifier should be anchored as a link, with the
> target of the link as follows:
> - url: output as is
> - doi: prepend with "`https://doi.org/`"
> - pmid: prepend with "`https://www.ncbi.nlm.nih.gov/pubmed/`"
> - pmcid: prepend with "`https://www.ncbi.nlm.nih.gov/pmc/articles/`"
> If the identifier is rendered as a URI, include rendered URI components
> (e.g. "`https://doi.org/`") in the link anchor. Do not include any other
> affix text in the link anchor (e.g. "Available from: ", "doi: ", "PMID: ").
> If the bibliography entry for an item does not render any of
> the above identifiers, then set the anchor of the link as the item
> title. If title is not rendered, then set the anchor of the link as the
> full bibliography entry for the item. Set the target of the link as one
> of the following, in order of priority:
>
> - doi: prepend with "`https://doi.org/`"
> - pmcid: prepend with "`https://www.ncbi.nlm.nih.gov/pmc/articles/`"
> - pmid: prepend with "`https://www.ncbi.nlm.nih.gov/pubmed/`"
> - url: output as is
>
> If the item data does not include any of the above identifiers, do not
> include a link.
>
> Citation processors should include an option flag for calling
> applications to disable bibliography linking behavior.
Thanks to Benjamin Bray for getting this all working.
|
|
These can make the test output confusing, making people think
tests are failing when they're passing.
|
|
Until now, users had to make sure that their reference doc contains
layouts in a specific order: the first four layouts in the file had to
have a specific structure, or else pandoc would error (or sometimes
successfully produce a pptx file, which PowerPoint would then fail to
open).
This commit changes the layout selection to use the layout names rather
than order: users must make sure their reference doc contains four
layouts with specific names, and if a layout with the right name isn’t
found pandoc will output a warning and use the corresponding layout from
the default reference doc as a fallback.
I believe the use of names rather than order will be clearer to users,
and the clearer errors will help them troubleshoot when things go wrong.
- Add tests for moved layouts
- Add tests for deleted layouts
- Add newly included layouts to slideMaster1.xml to fix tests
|
|
The `cdLine` field gives the line of the file some CData was found on. I
don’t think this is a difference that should fail these golden tests, as
the XML should still be parsable if nothing else has changed.
|
|
I had some failing tests and couldn’t tell what was different in the
XML. Updating the comparison to return what’s different made it easier
to figure out what was wrong, and I think will be helpful for others in
future.
|
|
Added an extension `short_subsuperscripts` which modifies the behavior
of `subscript` and `superscript`, allowing subscripts or superscripts containing only
alphanumerics to end with a space character (eg. `x^2 = 4` or `H~2 is
combustible`). This improves support for multimarkdown. Closes #5512.
Add `Ext_short_subsuperscripts` constructor to `Extension` [API change].
This is enabled by default for `markdown_mmd`.
|
|
Figure and table numbers are now only included if `native_numbering`
is enabled. (By default it is disabled.) This is a behavior change
with respect to 2.14.1, but the behavior is that of previous versions.
The change was necessary to avoid incompatibilities between pandoc's
native numbering and third-party cross reference filters like
pandoc-crossref.
Closes #7499.
|
|
|
|
before passing them off to citeproc.
This ensures that we get proper localization and flipflopping
if, e.g., quotes are used in titles.
Closes jgm/citeproc#87.
|
|
citeproc changes allow us to ignore Quoted elements;
citeproc now uses its own method for represented quoted
things, and only localizes and flipflops quotes it adds itself.
See #87.
The one thing left to do is to convert Quoted elements in
bibliography databases (esp. titles) to `Span ("",["csl-quoted"],[])`
before passing them to citeproc, IF the localized quotes
for the quote type match the standard inverted commas.
|
|
Using a code block containing `\end{verbatim}`, one could
inject raw TeX into a LaTeX document even when `raw_tex`
is disabled. Thanks to Augustin Laville for noticing the
bug.
Closes #7497.
|
|
These address most of the items mentioned in #7487.
There's also a table caption fix (the caption wasn't escaped).
|
|
See #7494.
|
|
They should by default scope over the group in which they
are defined (except `\gdef` and `\xdef`, which are global).
In addition, environments must be treated as groups.
We handle this by making sMacros in the LaTeX parser state
a STACK of macro tables. Opening a group adds a table to
the stack, closing one removes one. Only the top of the stack
is queried.
This commit adds a parameter for scope to the Macro constructor
(not exported).
Closes #7494.
|
|
- Fixed semantics for `\let`.
- Implement `\edef`, `\gdef`, and `\xdef`.
- Add comment noting that currently `\def` and `\edef` set global
macros (so are equivalent to `\gdef` and `\xdef`). This should be
fixed by scoping macro definitions to groups, in a future commit.
Closes #7474.
|
|
This gives a diff output on failure.
|
|
This modifies pBlank. Previously comments could sometimes
flummox the parser.
Cloes #7482.
|
|
|
|
- `rtf` is now supported as an input format as well as output.
- New module Text.Pandoc.Readers.RTF (exporting `readRTF`). [API change]
Closes #3982.
|
|
|
|
In some cases, the rounding performed by the LaTeX table
writer would introduce visible overrun outside the text
area.
This adds two more decimal places to the width values.
|
|
According to the spec, this is not needed or wanted when
the data is in hexadecimal format, as it is here.
|
|
According to the spec, this is mandatory.
|
|
Originally intended for referring to UNIX manual pages, either part of the same DocBook document as refentry element, or external – hence the manvolnum element.
These days, refentry is more general, for example the element documentation pages linked below are each a refentry.
As per the *Processing expectations* section of citerefentry, the element is supposed to be a hyperlink to a refentry (when in the same document) but pandoc does not support refentry tag at the moment so that is moot.
https://tdg.docbook.org/tdg/5.1/citerefentry.html
https://tdg.docbook.org/tdg/5.1/manvolnum.html
https://tdg.docbook.org/tdg/5.1/refentry.html
This roughly corresponds to a `manpage` role in rST syntax, which produces a `Code` AST node with attributes `.interpreted-text role=manpage` but that does not fit DocBook parser.
https://www.sphinx-doc.org/en/master/usage/restructuredtext/roles.html#role-manpage
|
|
We now use source positions from the token stream to tell us
how much of the text stream to consume. Getting this to
work required a few other changes to make token source positions
accurate.
Closes #7434.
|
|
With the recent changes to include infrastructure,
included code blocks were getting an extra newline.
Closes #7436. Added regression test.
|
|
Preserve all attributes in img tags. If attributes have a `data-`
prefix, it will be stripped. In particular, this preserves a
`data-external` attribute as an `external` attribute in the pandoc AST.
|
|
And fix a small bug in handling of citations in notes, which
led to commas at the end of sentences in some cases.
|
|
fixes #7423
|
|
This reverts commit cc088687b4013c2b8b744eb337ed04fc63f315f2
and PR #7295.
This fixes issues people had when using LaTeX commands defined later
in the preamble (or in some cases UTF-8 text) in the title or author
fields. Closes #7422.
|
