| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
- Support -i option
- Support incremental/noincremental divs
- Support older block quote syntax
- Add tests
One thing not clear from the manual is what should happen when the input
uses a combination of these things. For example, what should the
following produce?
```md
::: {.incremental .nonincremental}
- are
- these
- incremental?
:::
::: incremental
::::: nonincremental
- or
- these?
:::::
:::
::: nonincremental
> - how
> - about
> - these?
:::
```
In this commit I’ve taken the following approach, matching the observed
behaviour for beamer and reveal.js output:
- if a div with both classes, incremental wins
- the innermost incremental/nonincremental div is the one which takes
effect
- a block quote containing a list as its first element inverts whether
the list is incremental, whether or not the quote is inside an
incremental/non-incremental div
I’ve added some tests to verify this behaviour.
This commit closes issue #5689
(https://github.com/jgm/pandoc/issues/5689).
|
|
There was a mistake in the logic used to choose between the Comparison
and Two Content layouts: if one column contained only non-text (an image
or a table) and the other contained only text, the Comparison layout was
chosen instead of the desired Two Content layout.
This commit fixes that logic:
> If either column contains text followed by non-text, use Comparison.
Otherwise, use Two Content.
It also adds a test asserting this behaviour.
|
|
The HTML writer now supports `EndOfBlock`, `EndOfSection`, and
`EndOfDocument` for reference locations. EPUB and HTML slide
show formats are also affected by this change.
This works similarly to the markdown writer, but with special care
taken to skipping section divs with what regards to the block level.
The change also takes care to not modify the output if `EndOfDocument`
is used.
|
|
Until now, the pptx writer only supported four slide layouts: “Title
Slide” (used for the automatically generated metadata slide), “Section
Header” (used for headings above the slide level), “Two Column” (used
when there’s a columns div containing at least two column divs), and
“Title and Content” (used for all other slides).
This commit adds support for three more layouts: Comparison, Content
with Caption, and Blank.
- Support “Comparison” slide layout
This layout is used when a slide contains at least two columns, at
least one of which contains some text followed by some non-text (e.g.
an image or table). The text in each column is inserted into the
“body” placeholder for that column, and the non-text is inserted into
the ObjType placeholder. Any extra content after the non-text is
overlaid on top of the preceding content, rather than dropping it
completely (as currently happens for the two-column layout).
+ Accept straightforward test changes
Adding the new layout means the “-deleted-layouts” tests have an
additional layout added to the master and master rels.
+ Add new tests for the comparison layout
+ Add new tests to pandoc.cabal
- Support “Content with Caption” slide layout
This layout is used when a slide’s body contains some text, followed by
non-text (e.g. and image or a table). Before now, in this case the image
or table would break onto a new slide: to get that output again, users
can add a horizontal rule before the image or table.
+ Accept straightforward tests
The “-deleted-layouts” tests all have an extra layout and relationship
in the master for the Content with Caption layout.
+ Accept remove-empty-slides test
Empty slides are still removed, but the Content with Caption layout is
now used.
+ Change slide-level-0/h1-h2-with-text description
This test now triggers the content with caption layout, giving a
different (but still correct) result.
+ Add new tests for the new layout
+ Add new tests to the cabal file
- Support “Blank” slide layout
This layout is used when a slide contains only blank content (e.g.
non-breaking spaces). No content is inserted into any placeholders in
the layout.
Fixes #5097.
+ Accept straightforward test changes
Blank layout now copied over from reference doc as well, when
layouts have been deleted.
+ Add some new tests
A slide should use the blank layout if:
- It contains only speaker notes
- It contains only an empty heading with a body of nbsps
- It contains only a heading containing only nbsps
- Change ContentType -> Placeholder
This type was starting to have a constructor for each placeholder on
each slide (e.g. `ComparisonUpperLeftContent`). I’ve changed it
instead to identify a placeholder by type and index, as I think that’s
clearer and less redundant.
- Describe layout-choosing logic in manual
|
|
- Use dashes consistently rather than underscores
- Make a folder for each set of tests
- List test files explicitly (Cabal doesn’t support ** until version
2.4)
|
|
Before this commit, the pptx writer adds a slide break before any table,
“columns” div, or paragraph starting with an image, unless the only
thing before it on the same slide is a heading at the slide level. In
that case, the item and heading are kept on the same slide, and the
heading is used as the slide title (inserted into the layout’s “title”
placeholder).
However, if the slide level is set to 0 (as was recently enabled) this
makes it impossible to have a slide with a title which contains any of
those items in its body.
This commit changes this behaviour: now if the slide level is 0, then
items will be kept with a heading of any level, if the heading’s the
only thing before the item on the same slide.
|
|
These can make the test output confusing, making people think
tests are failing when they're passing.
|
|
Until now, users had to make sure that their reference doc contains
layouts in a specific order: the first four layouts in the file had to
have a specific structure, or else pandoc would error (or sometimes
successfully produce a pptx file, which PowerPoint would then fail to
open).
This commit changes the layout selection to use the layout names rather
than order: users must make sure their reference doc contains four
layouts with specific names, and if a layout with the right name isn’t
found pandoc will output a warning and use the corresponding layout from
the default reference doc as a fallback.
I believe the use of names rather than order will be clearer to users,
and the clearer errors will help them troubleshoot when things go wrong.
- Add tests for moved layouts
- Add tests for deleted layouts
- Add newly included layouts to slideMaster1.xml to fix tests
|
|
The `cdLine` field gives the line of the file some CData was found on. I
don’t think this is a difference that should fail these golden tests, as
the XML should still be parsable if nothing else has changed.
|
|
I had some failing tests and couldn’t tell what was different in the
XML. Updating the comparison to return what’s different made it easier
to figure out what was wrong, and I think will be helpful for others in
future.
|
|
Added an extension `short_subsuperscripts` which modifies the behavior
of `subscript` and `superscript`, allowing subscripts or superscripts containing only
alphanumerics to end with a space character (eg. `x^2 = 4` or `H~2 is
combustible`). This improves support for multimarkdown. Closes #5512.
Add `Ext_short_subsuperscripts` constructor to `Extension` [API change].
This is enabled by default for `markdown_mmd`.
|
|
Figure and table numbers are now only included if `native_numbering`
is enabled. (By default it is disabled.) This is a behavior change
with respect to 2.14.1, but the behavior is that of previous versions.
The change was necessary to avoid incompatibilities between pandoc's
native numbering and third-party cross reference filters like
pandoc-crossref.
Closes #7499.
|
|
This gives a diff output on failure.
|
|
|
|
- `rtf` is now supported as an input format as well as output.
- New module Text.Pandoc.Readers.RTF (exporting `readRTF`). [API change]
Closes #3982.
|
|
Preserve all attributes in img tags. If attributes have a `data-`
prefix, it will be stripped. In particular, this preserves a
`data-external` attribute as an `external` attribute in the pandoc AST.
|
|
The numbers are added using fields, so that Word can
create a list of tables that will update automatically.
|
|
attention, error and hint are actually just reStructuredText specific.
danger was too until introduced in DocBook 5.2: https://github.com/docbook/docbook/issues/55
|
|
|
|
* Column spans
* Row spans
- The spec says that if the `val` attribute is ommitted, its value
should be assumed to be `continue`, and that its values are
restricted to {`restart`, `continue`}. If the value has any other
value, I think it seems reasonable to default it to `continue`. It
might cause problems if the spec is extended in the future by adding
a third possible value, in which case this would probably give
incorrect behaviour, and wouldn't error.
* Allow multiple header rows
* Include table description in simple caption
- The table description element is like alt text for a table (along
with the table caption element). It seems like we should include
this somewhere, but I’m not 100% sure how – I’m pairing it with the
simple caption for the moment. (Should it maybe go in the block
caption instead?)
* Detect table captions
- Check for caption paragraph style /and/ either the simple or
complex table field. This means the caption detection fails for
captions which don’t contain a field, as in an example doc I added
as a test. However, I think it’s better to be too conservative: a
missed table caption will still show up as a paragraph next to the
table, whereas if I incorrectly classify something else as a table
caption it could cause havoc by pairing it up with a table it’s
not at all related to, or dropping it entirely.
* Update tests and add new ones
Partially fixes: #6316
|
|
|
|
And fix a test that failed in that way!
|
|
Support has been added for the new
`[alias|https://example.com|smart-card]` syntax.
|
|
In the current dev version, we will sometimes add
a version of an image with a hashed name, keeping
the original version with the original name, which
would leave to undesirable duplication.
This change separates the media's filename from the
media's canonical name (which is the path of the link
in the document itself). Filenames are based on SHA1
hashes and assigned automatically.
In Text.Pandoc.MediaBag:
- Export MediaItem type [API change].
- Change MediaBag type to a map from Text to MediaItem [API change].
- `lookupMedia` now returns a `MediaItem` [API change].
- Change `insertMedia` so it sets the `mediaPath` to
a filename based on the SHA1 hash of the contents.
This will be used when contents are extracted.
In Text.Pandoc.Class.PandocMonad:
- Remove `fetchMediaResource` [API change].
Lua MediaBag module has been changed minimally. In the future
it would be better, probably, to give Lua access to the full
MediaItem type.
|
|
Closes: tarleb/jira-wiki-markup#10
|
|
If a code block is defined with `<pre><code
class="language-x">…</code></pre>`, where the `<pre>` element has no
attributes, then the attributes from the `<code>` element are used
instead. Any leading `language-` prefix is dropped in the code's *class*
attribute are dropped to improve syntax highlighting.
Closes: #7221
|
|
Fixes: #5944
|
|
Closes: #7246
|
|
|
|
HTML5 `<header>` elements are treated like `<div>` elements.
|
|
Previously, when multiple file arguments were provided, pandoc
simply concatenated them and passed the contents to the readers,
which took a Text argument.
As a result, the readers had no way of knowing which file
was the source of any particular bit of text. This meant that
we couldn't report accurate source positions on errors or
include accurate source positions as attributes in the AST.
More seriously, it meant that we couldn't resolve resource
paths relative to the files containing them
(see e.g. #5501, #6632, #6384, #3752).
Add Text.Pandoc.Sources (exported module), with a `Sources` type
and a `ToSources` class. A `Sources` wraps a list of `(SourcePos,
Text)` pairs. [API change] A parsec `Stream` instance is provided for
`Sources`. The module also exports versions of parsec's `satisfy` and
other Char parsers that track source positions accurately from a
`Sources` stream (or any instance of the new `UpdateSourcePos` class).
Text.Pandoc.Parsing now exports these modified Char parsers instead of
the ones parsec provides. Modified parsers to use a `Sources` as stream
[API change].
The readers that previously took a `Text` argument have been
modified to take any instance of `ToSources`. So, they may still
be used with a `Text`, but they can also be used with a `Sources`
object.
In Text.Pandoc.Error, modified the constructor PandocParsecError
to take a `Sources` rather than a `Text` as first argument,
so parse error locations can be accurately reported.
T.P.Error: showPos, do not print "-" as source name.
|
|
They represent images, the same way as other images in vml format.
|
|
Treat a leading " with no closing " as a left curly quote.
This supports the practice, in fiction, of continuing
paragraphs quoting the same speaker without an end quote.
It also helps with quotes that break over lines in line
blocks.
Closes #7216.
|
|
If the element has a content-type attribute, or at least one class, then
that value is used as `content-type` and the span is put inside a
`<named-content>` element. Otherwise a `<styled-content>` element is
used instead.
Closes: #7211
|
|
Spans with attributes are converted to `<named-content>` elements
instead of being wrapped with `<milestone-start/>` and `<milestone-end>`
elements. Milestone elements are not allowed in documents using the
articleauthoring tag set, so this change ensures the creation of valid
documents.
Closes: #7211
|
|
XML identifiers must start with an underscore or letter, and can contain
only a limited set of punctuation characters. Any IDs not adhering to
these rules are rewritten by writing the offending characters as Uxxxx,
where `xxxx` is the character's hex code.
|
|
|
|
Add key-value pairs found in the attributes list of Header.Attr as
XML attributes on the corresponding section element.
Any key name not allowed as an XML attribute name is dropped, as
are keys with invalid values where they are defined as enums in
DocBook, and xml:id (for DocBook 5)/id (for DocBook 4) to not
intervene with computed identifiers.
|
|
avoiding the need to depend on the executable-path package.
|
|
This avoids code duplication between Command and Old.
|
|
Apparently Cabal sets a `pandoc_datadir` environment variable
so that the data files will be sought in the source directory
rather than in the final destination (where they aren't yet
installed).
So we no longer need to set `--data-dir` in the tests. We just
need to make sure `pandoc_datadir` is set in the environment
when we call the program in the test suite.
This will fix the issue with loading of pandoc.lua when
pandoc is built with `-embed_data_files`, reported in #7163.
Closes #7163.
|
|
Closes: tarleb/jira-wiki-markup#2
|
|
Include div attributes in panels, always render divs with class `panel`
as panels, and avoid nesting of panels.
|
|
Code blocks that are not marked as a language supported by Jira are
rendered as preformatted text with `{noformat}` blocks.
Fixes: tarleb/jira-wiki-markup#4
|
|
Closes: tarleb/jira-wiki-markup#3.
|
|
|
|
[API change]
These were only exported for testing, which seems the
wrong thing to do. They don't belong in the public
API and are not really usable as they are, without access
to the Tok type which is not exported.
Removed the tokenize/untokenize roundtrip test.
We put a quickcheck property in the comments which
may be used when this code is touched (if it is).
|
|
Ensures that tasty-hunit reports the location of the failing test
instead of the location of the helper `test` function.
|
|
[API change] This affects `readFile`, `getContents`, `writeFileWith`,
`writeFile`, `putStrWith`, `putStr`, `putStrLnWith`, `putStrLn`.
`hPutStrWith`, `hPutStr`, `hPutStrLnWith`, `hPutStrLn`, `hGetContents`.
This avoids the need to uselessly create a linked list of characters
when emiting output.
|
|
The org-ref syntax allows to list multiple citations separated by comma.
This fixes a bug that accepted commas as part of the citation id, so all
citation lists were parsed as one single citation.
Fixes: #7101
|
