Age | Commit message (Collapse) | Author | Files | Lines |
|
We don't need it for anything but the log messages, and we can just
keep track of that in state and pass it along to the `writePowerpoint`
function. This will simplify the code.
|
|
We don't convert a '#target' ExternalTarget to an InternalTarget if
`target` is not in the AnchorMap. We just remove the link. This
prevents broken links in the Powerpoint output.
|
|
They were broken when I refactored (the Output module wanted to use
state left over from the construction of the Presentation type). This
change introduces a new type `LinkTarget = InternalTarget |
ExternalTarget`. Internal target points to a slide number, and these
will all be resolved before the Presentation is passed along to the
Output module.
|
|
rst2latex.py uses an align* environment for math in
`.. math::` blocks, so this math may contain line breaks.
If it does, we put the math in an `aligned` environment
to simulate rst2latex.py's behavior.
Closes #4254.
|
|
The change both improves performance and fixes a
regression whereby normal citations inside inline notes
were not parsed correctly.
Closes jgm/pandoc-citeproc#315.
|
|
|
|
There are two steps in the conversion: a conversion from pandoc to a
Presentation datatype modeling pptx, and a conversion from
Presentation to a pptx archive. The two steps were sharing the same
state and environment, and the code was getting a bit
spaghetti-ish. This separates the conversion into separate
modules (T.P.W.Powerpoint.Presentation, which defineds the
Presentation datatype and goes Pandoc->Presentation)
and (T.P.W.Pandoc.Output, which goes Presentation->Archive).
Text.Pandoc.Writers.Powerpoint a thin wrapper around the two modules.
|
|
Just as a slide can't have an image and text on the same slide because
of overlapping, we can't have both in a single column. We run
splitBlocks on the text in the column and discard the rest.
|
|
You can have two images side-by-side, or text alongside an image. The
image will be fit correctly within the column.
|
|
We put `getContentShape` and `getContentShapeSize` inside the P monad,
so that we can (in the future) make use of knowledge of what slide
environment we're in to get the correct shape. This will allow us, for
example, to get individual columns for a two-column layout, and place
images in them appropriately.
|
|
even if the `latex_macros` extension is set.
This reverts to earlier behavior and is probably safer
on the whole, since some macros only modify things in
included packages, which pandoc's macro expansion can't
modify.
Closes #4246.
|
|
|
|
We now determine image and caption placement by getting the dimensions
of the content box in a given layout. This allows for images to be
correctly sized and positioned in a different template.
Note that iamges without captions and headers are no longer
full-screened. We can't do this dependably in different layouts,
because we don't know where the header is (it could be to the side of
the content, for example).
|
|
Previously we went into an infinite loop with
```
\newcommand{\noop}[1]{#1}
\noop{\newcommand{\foo}[1]{#1}}
\foo{hi}
```
See #4253.
|
|
Our presentation size is now dependent on the reference/template file
we use. This will make it easier to set different output sizes by
supplying different reference files. The alternative (allowing a user
to explicitly set output size regardless of the template) will lead to
too many thorny issues, as explicitly set sizes at the various level
of powerpoint layout would have to be reset.
|
|
Last commit accidentally left commented-out code in.
|
|
Above the slidelevel, subheaders will be printed in bold and given a
bit of extra space before them. Note that at the moment, no
distinction is made between levels of headers above the slide header,
though that can be changed. (It has to be changed in pandoc, since
PowerPoint has no concept of paragraph or character classes.)
This allows us to clean up the code as well: the code in
`blockToParagraphs` since it will only touch content blocks, and
therefore will not deal with headers at or below the slidelevel.
|
|
Since we now import from reference/dist file by glob, we need to make
sure that we're getting the files we need to make a non-corrupt
Powerpoint. This performs that check.
(In the process, this change also cleaned up a lot of commented-out
code left from the switch to the new reference-doc method.)
|
|
Templating should work much more reliably now. There is still some
problem with image placement when we change sizes. A further commit
will address this.
|
|
Provide more context about the task which caused an error.
|
|
|
|
The options which were used to read the document are made available to
Lua filters via the `PANDOC_READER_OPTIONS` global.
|
|
Accompanying change in MANUAL.txt
|
|
This will allow the Powerpoint writer to use it as well.
|
|
It used to be hardcoded to 2. This will set it to the appropriate
slide-level.
|
|
This is triggered by the `--toc` flag. Note that in a long slide deck
this risks overrunning the text box. The user can address this by
setting `--toc-depth=1`.
|
|
Previously, this hadn't been aware of a metadata slide. We also
clarify the logic for setting the startnumber of different slide
sections correctly.
|
|
If the user entered an internal link without a corresponding anchor,
it would produce a corrupted file. Now we check the anchor map, and
make sure the target is in the file. If it isn't, we ignore it.
|
|
We want to count the slide numbers correctly if it's in there.
|
|
For anchor-type links (`[foo](#bar)`) we produce an anchor link. In
powerpoint these are links to slides, so we keep track of a map
relating anchors to the slides they occur on.
|
|
For anchors, block-processing functions need to know what slide number
they're in. We make the envCurSlideId available to blocks.
|
|
It really isn't a moving state, and that can be misleading.
|
|
This fixes a bug whereby column widths for the body were
different from widths for the header in some tables.
Closes #4238.
|
|
Instead of creating a div containing the header, we put
the id directly on the header. This way header promotion
will work properly. Closes #4240.
|
|
Closes #4235.
|
|
If you use a custom syntax definition that refers to a syntax
you haven't loaded, pandoc will now complain when it is highlighting
the text, rather than at the start.
This saves a huge performance hit from the `missingIncludes` check.
Closes #4226.
|
|
The current pandoc-types version is made available to Lua programs in
the global PANDOC_API_VERSION. It contains the version as a list of
numbers.
|
|
The current pandoc version is made available to Lua programs in the
global PANDOC_VERSION. It contains the version as a list of numbers.
|
|
This avoids a huge performance sink that comes from evaluating
all the elements of the default syntax map.
Better just to have run-time errors for missing includes?
See #4226.
|
|
|
|
The fields were named like the Haskell fields, not like the documented,
shorter version. The names are changed to match the documentation and
Citations are given a shared metatable to enable simple extensibility.
Fixes: #4222
|
|
Some helper functions and types have been moved to hslua.
Change: minor
|
|
|
|
For now, ignore notes div for parity with other slide outputs.
|
|
We had previously defaulted to slideLevel 2. Now we use the correct
behavior of defaulting to the highest level header followed by
content. We change an expected test result to match this behavior.
|
|
We treat links with an image as the first inline as an image with a
link picProp -- so we have to split on it the same as if it were an
image.
|
|
This will make the xml easier to read for debugging purposes. It
should also make links behave more consistently across numerous words.
|
|
Previous version replaced *each* element from the template with the
new elements -- leading to multiple overlapping frames. This only
replaces the first instance, and throws out the rest.
|
|
Previously (a) the code size wasn't set when we force size, and (b)
the properties was set from the default, instead of inheriting. Both
of those problems were fixed.
|
|
A lot of work in the powerpoint writer is replacing XML from within
slidelayouts from templates. This function does a good deal of that
work, and this makes it preserve element order, as well as making it a
bit easier to understand.
|