aboutsummaryrefslogtreecommitdiff
path: root/src/Text/Pandoc/Writers/Powerpoint/Output.hs
AgeCommit message (Collapse)AuthorFilesLines
2021-09-10pptx: Fix capitalisation of notesMasterIdEmily Bourke1-1/+1
I don’t think this has caused any problems, but before now it’s been "NotesMasterId", which is incorrect according to [ECMA-376]. [ECMA-376]: https://www.ecma-international.org/publications-and-standards/standards/ecma-376/
2021-09-01pptx: Add support for more layoutsEmily Bourke1-26/+153
Until now, the pptx writer only supported four slide layouts: “Title Slide” (used for the automatically generated metadata slide), “Section Header” (used for headings above the slide level), “Two Column” (used when there’s a columns div containing at least two column divs), and “Title and Content” (used for all other slides). This commit adds support for three more layouts: Comparison, Content with Caption, and Blank. - Support “Comparison” slide layout This layout is used when a slide contains at least two columns, at least one of which contains some text followed by some non-text (e.g. an image or table). The text in each column is inserted into the “body” placeholder for that column, and the non-text is inserted into the ObjType placeholder. Any extra content after the non-text is overlaid on top of the preceding content, rather than dropping it completely (as currently happens for the two-column layout). + Accept straightforward test changes Adding the new layout means the “-deleted-layouts” tests have an additional layout added to the master and master rels. + Add new tests for the comparison layout + Add new tests to pandoc.cabal - Support “Content with Caption” slide layout This layout is used when a slide’s body contains some text, followed by non-text (e.g. and image or a table). Before now, in this case the image or table would break onto a new slide: to get that output again, users can add a horizontal rule before the image or table. + Accept straightforward tests The “-deleted-layouts” tests all have an extra layout and relationship in the master for the Content with Caption layout. + Accept remove-empty-slides test Empty slides are still removed, but the Content with Caption layout is now used. + Change slide-level-0/h1-h2-with-text description This test now triggers the content with caption layout, giving a different (but still correct) result. + Add new tests for the new layout + Add new tests to the cabal file - Support “Blank” slide layout This layout is used when a slide contains only blank content (e.g. non-breaking spaces). No content is inserted into any placeholders in the layout. Fixes #5097. + Accept straightforward test changes Blank layout now copied over from reference doc as well, when layouts have been deleted. + Add some new tests A slide should use the blank layout if: - It contains only speaker notes - It contains only an empty heading with a body of nbsps - It contains only a heading containing only nbsps - Change ContentType -> Placeholder This type was starting to have a constructor for each placeholder on each slide (e.g. `ComparisonUpperLeftContent`). I’ve changed it instead to identify a placeholder by type and index, as I think that’s clearer and less redundant. - Describe layout-choosing logic in manual
2021-08-18pptx: Include image title in descriptionEmily Bourke1-4/+9
The image title (i.e. `![alt text](link "title")`) was previously ignored when writing to pptx. This commit includes it in PowerPoint's description of the image, along with the link (which was already included). Fixes 7352.
2021-08-17Revise citeproc code to fit new citeproc 0.5 API.John MacFarlane1-6/+6
Linkification of URLs in the bibliography is now done in the citeproc library, depending on the setting of an option. We set that option depending on the value of the metadata field `link-bibliography` (defaulting to true, for consistency with earlier behavior, though the new behavior includes the CSL draft recommendation of hyperlinking the title or the whole entry if a DOI, PMID, PMCID, or URL field is present but not explicitly rendered). These changes implement the following recommendations from the draft CSL v1.0.2 spec (Appendix VI): > The CSL syntax does not have support for configuration of links. > However, processors should include links on bibliographic references, > using the following rules: > If the bibliography entry for an item renders any of the following > identifiers, the identifier should be anchored as a link, with the > target of the link as follows: > - url: output as is > - doi: prepend with "`https://doi.org/`" > - pmid: prepend with "`https://www.ncbi.nlm.nih.gov/pubmed/`" > - pmcid: prepend with "`https://www.ncbi.nlm.nih.gov/pmc/articles/`" > If the identifier is rendered as a URI, include rendered URI components > (e.g. "`https://doi.org/`") in the link anchor. Do not include any other > affix text in the link anchor (e.g. "Available from: ", "doi: ", "PMID: "). > If the bibliography entry for an item does not render any of > the above identifiers, then set the anchor of the link as the item > title. If title is not rendered, then set the anchor of the link as the > full bibliography entry for the item. Set the target of the link as one > of the following, in order of priority: > > - doi: prepend with "`https://doi.org/`" > - pmcid: prepend with "`https://www.ncbi.nlm.nih.gov/pmc/articles/`" > - pmid: prepend with "`https://www.ncbi.nlm.nih.gov/pubmed/`" > - url: output as is > > If the item data does not include any of the above identifiers, do not > include a link. > > Citation processors should include an option flag for calling > applications to disable bibliography linking behavior. Thanks to Benjamin Bray for getting this all working.
2021-08-17Rename TemplateWarning -> PowerpointTemplateWarning.John MacFarlane1-1/+2
@undergroundquizscene - I think TemplateWarning is apt to be confusing, since this actually doesn't have anything to do with what we call 'templates' in pandoc. Hence the change to a powerpoint-specific name.
2021-08-17pptx: Select layouts from reference doc by nameEmily Bourke1-19/+206
Until now, users had to make sure that their reference doc contains layouts in a specific order: the first four layouts in the file had to have a specific structure, or else pandoc would error (or sometimes successfully produce a pptx file, which PowerPoint would then fail to open). This commit changes the layout selection to use the layout names rather than order: users must make sure their reference doc contains four layouts with specific names, and if a layout with the right name isn’t found pandoc will output a warning and use the corresponding layout from the default reference doc as a fallback. I believe the use of names rather than order will be clearer to users, and the clearer errors will help them troubleshoot when things go wrong. - Add tests for moved layouts - Add tests for deleted layouts - Add newly included layouts to slideMaster1.xml to fix tests
2021-06-23ImageSize: Add Tiff constructor for ImageType.John MacFarlane1-0/+1
[Minor API change] This allows pandoc to get size information from tiff images. Closes #7405.
2021-03-29Powerpoint writer: allow monofont to be specified in metadata...John MacFarlane1-5/+18
...not just using `--variable` on the command line (as in other writers). Closes #7187.
2021-03-19Protect partial uses of maximum with NonEmpty.John MacFarlane1-21/+21
2021-03-19Use NonEmpty instead of minimumDef.John MacFarlane1-2/+3
2021-03-18Use minimumDef instead of minimum (partial function).John MacFarlane1-5/+2
2021-02-16Rename Text.Pandoc.XMLParser -> Text.Pandoc.XML.Light...John MacFarlane1-98/+103
..and add new definitions isomorphic to xml-light's, but with Text instead of String. This allows us to keep most of the code in existing readers that use xml-light, but avoid lots of unnecessary allocation. We also add versions of the functions from xml-light's Text.XML.Light.Output and Text.XML.Light.Proc that operate on our modified XML types, and functions that convert xml-light types to our types (since some of our dependencies, like texmath, use xml-light). Update golden tests for docx and pptx. OOXML test: Use `showContent` instead of `ppContent` in `displayDiff`. Docx: Do a manual traversal to unwrap sdt and smartTag. This is faster, and needed to pass the tests. Benchmarks: A = prior to 8ca191604dcd13af27c11d2da225da646ebce6fc (Feb 8) B = as of 8ca191604dcd13af27c11d2da225da646ebce6fc (Feb 8) C = this commit | Reader | A | B | C | | ------- | ----- | ------ | ----- | | docbook | 18 ms | 12 ms | 10 ms | | opml | 65 ms | 62 ms | 35 ms | | jats | 15 ms | 11 ms | 9 ms | | docx | 72 ms | 69 ms | 44 ms | | odt | 78 ms | 41 ms | 28 ms | | epub | 64 ms | 61 ms | 56 ms | | fb2 | 14 ms | 5 ms | 4 ms |
2021-02-11Use getTimestamp instead of getCurrentTime in writers.John MacFarlane1-1/+1
Setting SOURCE_DATE_EPOCH will allow reproducible builds. Partially addresses #7093. This does not suffice to fully enable reproducible in EPUB, since a unique id is being generated for each build.
2021-02-10Add new unexported module T.P.XMLParser.John MacFarlane1-1/+3
This exports functions that uses xml-conduit's parser to produce an xml-light Element or [Content]. This allows existing pandoc code to use a better parser without much modification. The new parser is used in all places where xml-light's parser was previously used. Benchmarks show a significant performance improvement in parsing XML-based formats (especially ODT and FB2). Note that the xml-light types use String, so the conversion from xml-conduit types involves a lot of extra allocation. It would be desirable to avoid that in the future by gradually switching to using xml-conduit directly. This can be done module by module. The new parser also reports errors, which we report when possible. A new constructor PandocXMLError has been added to PandocError in T.P.Error [API change]. Closes #7091, which was the main stimulus. These changes revealed the need for some changes in the tests. The docbook-reader.docbook test lacked definitions for the entities it used; these have been added. And the docx golden tests have been updated, because the new parser does not preserve the order of attributes. Add entity defs to docbook-reader.docbook. Update golden tests for docx.
2020-12-27Powerpoint writer: allow arbitrary OOXML in raw inline elementsAlbert Krewinkel1-22/+27
The raw text is now included verbatim in the output. Previously is was parsed into XML elements, which prevented the inclusion of partial XML snippets.
2020-09-13Fix hlint suggestions, update hlint.yaml (#6680)Christian Despres1-15/+14
* Fix hlint suggestions, update hlint.yaml Most suggestions were redundant brackets. Some required LambdaCase. The .hlint.yaml file had a small typo, and didn't ignore camelCase suggestions in certain modules.
2020-04-30PowerPoint writer: write math input verbatim in speaker notes.Jesse Rosenthal1-6/+12
OMML in speaker notes would lead to corrupt PowerPoint output. We now output the OMML verbatim as LaTeX in the speaker notes. Closes #6301.
2020-04-15Implement the new Table typedespresc1-2/+2
2020-03-22Finer grained imports of Text.Pandoc.Class submodules (#6203)Albert Krewinkel1-2/+2
This should speed-up recompilation after changes in `Text.Pandoc.Class`, as the number of modules affected by a change will be smaller in general. It also offers faster insights into the parts of `T.P.Class` used within a module.
2020-03-15Use implicit Prelude (#6187)Albert Krewinkel1-2/+0
* Use implicit Prelude The previous behavior was introduced as a fix for #4464. It seems that this change alone did not fix the issue, and `stack ghci` and `cabal repl` only work with GHC 8.4.1 or newer, as no custom Prelude is loaded for these versions. Given this, it seems cleaner to revert to the implicit Prelude. * PandocMonad: remove outdated check for base version Only base versions 4.9 and later are supported, the check for `MIN_VERSION_base(4,8,0)` is therefore unnecessary. * Always use custom prelude Previously, the custom prelude was used only with older GHC versions, as a workaround for problems with ghci. The ghci problems are resolved by replacing package `base` with `base-noprelude`, allowing for consistent use of the custom prelude across all GHC versions.
2020-03-13Update copyright year (#6186)Albert Krewinkel1-1/+1
* Update copyright year * Copyright: add notes for Lua and Jira modules
2020-02-07Apply linter suggestions. Add fix_spacing to lint target in Makefile.John MacFarlane1-78/+69
2020-02-07Resolve HLint warningsAlbert Krewinkel1-56/+55
All warnings are either fixed or, if more appropriate, HLint is configured to ignore them. HLint suggestions remain. * Ignore "Use camelCase" warnings in Lua and legacy code * Fix or ignore remaining HLint warnings * Remove redundant brackets * Remove redundant `return`s * Remove redundant as-pattern * Fuse mapM_/map * Use `.` to shorten code * Remove redundant `fmap` * Remove unused LANGUAGE pragmas * Hoist `not` in Text.Pandoc.App * Use fewer imports for `Text.DocTemplates` * Remove redundant `do`s * Remove redundant `$`s * Jira reader: remove unnecessary parentheses
2020-02-07Various minor cleanups and refactoring (#6117)Joseph C. Sible1-5/+5
* Use concatMap instead of reimplementing it * Replace an unnecessary multi-way if with a regular if * Use sortOn instead of sortBy and comparing * Use guards instead of lots of indents for if and else * Remove redundant do blocks * Extract common functions from both branches of maybe Whenever both the Nothing and the Just branch of maybe do the same function, do that function on the result of maybe instead. * Use fmap instead of reimplementing it from maybe * Use negative forms instead of negating the positive forms * Use mapMaybe instead of mapping and then using catMaybes * Use zipWith instead of mapping over the result of zip * Use unwords instead of reimplementing it * Use <$ instead of <$> and const * Replace case of Bool with if and else * Use find instead of listToMaybe and filter * Use zipWithM instead of mapM and zip * Inline lambda wrappers into the real functions * We get zipWithM from Text.Pandoc.Writers.Shared * Use maybe instead of fromMaybe and fmap I'm not sure how this one slipped past me. * Increase a bit of indentation
2019-11-12Switch to new pandoc-types and use Text instead of String [API change].despresc1-129/+136
PR #5884. + Use pandoc-types 1.20 and texmath 0.12. + Text is now used instead of String, with a few exceptions. + In the MediaBag module, some of the types using Strings were switched to use FilePath instead (not Text). + In the Parsing module, new parsers `manyChar`, `many1Char`, `manyTillChar`, `many1TillChar`, `many1Till`, `manyUntil`, `mantyUntilChar` have been added: these are like their unsuffixed counterparts but pack some or all of their output. + `glob` in Text.Pandoc.Class still takes String since it seems to be intended as an interface to Glob, which uses strings. It seems to be used only once in the package, in the EPUB writer, so that is not hard to change.
2019-10-09Options.WriterOptions: Change type of writerVariables to Context Text.John MacFarlane1-2/+5
This will allow structured values. [API change]
2019-09-28Replace some more fails with throwErrors.John MacFarlane1-1/+2
2019-09-28Use Prelude.fail to avoid ambiguity with fail from GHC.Base.John MacFarlane1-1/+1
2019-08-27PowerPoint writer: Start numbering at appopriate numbers.Jesse Rosenthal1-4/+8
Starting numbers for ordered lists were previously ignored. Now we specify the number if it is something other than 1. Closes: #5709
2019-06-14Powerpoint code formatting is now context dependent (#5573)Jeroen de Haas1-9/+29
This commit alters the way in which the Powerpoint writer treats inline code and code blocks. - Inline code is now formatted at the same size as the surrounding text. - Code blocks are now given a margin and font size according to their level. - Furthermore this commit allows changing the font with which code is formatted via the `monofont` option. Tested in - PowerPoint 365 for Windows - 1808 (Build 10730.20344 Click-to-Run) - PowerPoint 365 for Mac - 16.26 (19060901)
2019-04-04PowerPoint writer: Always open up in slide viewJesse Rosenthal1-8/+26
When editing a template/reference-doc, the user might be in Master view, but when producing a slide show, it is assumed that slide view will be desired. This removes the "lastView" attr from the viewProps.xml slide so that the presentation will always open up in slide view. Note this requires creating a new "ppt/viewProps.xml" instead of just moving over the old one from the viewProps file. Since this produces a slightly different order of xml files in the content manifest, the golden files will have to be rebuilt.
2019-04-01PowerPoint writer: Remove handoutsMasterList from template presentation.xmlJesse Rosenthal1-7/+9
We don't build it at the moment, so it was causing corruption.
2019-04-01PowerPoint writer: Build sp trees correctlyJesse Rosenthal1-17/+19
We were previously carrying over too many elements from the layout, which produced visual artifacts and some corruption. This empties the sptree (except for properties) after building the shapes, and then inserts them. Together with 5e944bf5, fixes #5402 (Note that this addresses the issue and template in that particular bug report. Other issues will arise no doubt arise with other templates.)
2019-04-01PowerPoint writer: Correct application of reference doc for contentJesse Rosenthal1-30/+16
Previously we had applied content shapes based on their index (which was "1", "2" in MS Word 2013). It turns out that this was a convention, and could not be relied on. Instead we use a default type (ie, a ph tag with no "type"). This is more correct, and should make the application of reference documents in PowerPoint much more robust.
2019-04-01PowerPoint writer: Make default placeholder type for template lookupJesse Rosenthal1-18/+42
This is the first step toward making templating work better. It seems that content shapes have a default ph type. In other words, shapes with *NO PH TYPE* should be considered to have an "obj" ph type, and used as content shapes. see https://github.com/scanny/python-pptx/blob/master/docs/dev/analysis/placeholders/slide-placeholders/placeholders-in-new-slide.rst
2019-03-01Remove license boilerplate.John MacFarlane1-19/+0
The haddock module header contains essentially the same information, so the boilerplate is redundant and just one more thing to get out of sync.
2019-02-04Add missing copyright notices and remove license boilerplate (#5112)Albert Krewinkel1-2/+2
Quite a few modules were missing copyright notices. This commit adds copyright notices everywhere via haddock module headers. The old license boilerplate comment is redundant with this and has been removed. Update copyright years to 2019. Closes #4592.
2019-01-26Improve writing metadata for docx, pptx and odt (#5252)Agustín Martín Barbero1-5/+36
* docx writer: support custom properties. Solves the writer part of #3024. Also supports additional core properties: `subject`, `lang`, `category`, `description`. * odt writer: improve standard properties, including the following core properties: `generator` (Pandoc/VERSION), `description`, `subject`, `keywords`, `initial-creator` (from authors), `creation-date` (actual creation date). Also fix date. * pptx writer: support custom properties. Also supports additional core properties: `subject`, `category`, `description`. * Includes golden tests. * MANUAL: document metadata support for docx, odt, pptx writers
2018-10-20Powerpoint: Support raw openxml in pptx writer.Jesse Rosenthal1-10/+13
This allows raw openxml blocks and inlines to be used in the pptx writer. A few caveats: 1. It's up to the user to write well-formed openxml. The chances for corruption, especially with such a brittle format as pptx, is pretty high. 2. Because of the tricky way that blocks map onto shapes, if you are using a raw block, it should be the only block on a slide (otherwise other text might end up overlapping it). 3. The pptx ooxml namespace abbreviations are different from the docx ooxml namespaces. Again, it's up to the user to get it right. Unzipped document and ooxml specification should be consulted. Closes: #4976
2018-04-26Remove unused importAlexander Krotov1-1/+1
2018-04-26Simplify curSlideHasSpeakerNotesAlexander Krotov1-4/+2
2018-03-24Powerpoint writer: simplify code with `ParseXml`Jesse Rosenthal1-23/+2
There were some artifact code blocks around from before `reference-doc` functionality was implemented. This led to ignoring the reference-doc in places. Though I fixed this, I kept the old hacked-up functions instead of replacing them with `parseXml` (imported from Writers.OOXML) which does this in a consistent manner. This commit corrects that oversight.
2018-03-24Powerpoint writer: Allow fallback options when looking for placeholder type.Jesse Rosenthal1-9/+17
2018-03-24Revert "Powerpoint writer: Remove spPr tag from non-body layouts"Jesse Rosenthal1-5/+1
This reverts commit 99fa850a37cc3e56b415754c70ea2d98da709584.
2018-03-24Powerpoint reader: Check reference-doc for all layouts.Jesse Rosenthal1-2/+6
There were a few layouts where we were still just checking the built in pptx doc, instead of the supplied reference doc.
2018-03-23Powerpoint writer: Remove spPr tag from non-body layoutsJesse Rosenthal1-1/+5
This was causing headers to be misaligned when some templates were used.
2018-03-23Powerpoint writer: Remove `Maybe` from `SpeakerNotes` in `Slide`.Jesse Rosenthal1-53/+51
Previously, we had treated it as a `Maybe`. But there is no difference between not having speaker notes and having empty speaker notes. So we make the SpeakerNotes newtype into a monoid, and test for memptiness instead of testing for Just/Nothing.
2018-03-18Removed old-locale flag and Text.Pandoc.Compat.Time.John MacFarlane1-1/+1
This is no longer necessary since we no longer support ghc 7.8.
2018-03-18Use NoImplicitPrelude and explicitly import Prelude.John MacFarlane1-0/+2
This seems to be necessary if we are to use our custom Prelude with ghci. Closes #4464.
2018-02-27Powerpoint writer: Use table stylesJesse Rosenthal1-3/+17
This will use the default table style in the reference-doc file. As a result they will be easier when using in a template, and match the color scheme.
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 00:33:24 +0000