From e3ef8e974cec43a6a53b6568c7915c41e9633119 Mon Sep 17 00:00:00 2001 From: Karl Berry Date: Tue, 9 Feb 1999 15:10:17 +0000 Subject: * texinfo.tex: New commands @alias and @definfoenclose. From: "Eric S. Raymond" . --- texinfo.tex | 1317 ++++++++++++++++++++++++++++++----------------------------- 1 file changed, 663 insertions(+), 654 deletions(-) diff --git a/texinfo.tex b/texinfo.tex index 6baddea..0481145 100644 --- a/texinfo.tex +++ b/texinfo.tex @@ -3,7 +3,7 @@ % Load plain if necessary, i.e., if running under initex. \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi % -\def\texinfoversion{1999-02-08}% +\def\texinfoversion{1999-02-09}% % % Copyright (C) 1985, 86, 88, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99 % Free Software Foundation, Inc. @@ -738,351 +738,6 @@ where each line of input produces a line of output.} % @paragraphindent is defined for the Info formatting commands only. \let\paragraphindent=\comment -% Prevent errors for section commands. -% Used in @ignore and in failing conditionals. -\def\ignoresections{% -\let\chapter=\relax -\let\unnumbered=\relax -\let\top=\relax -\let\unnumberedsec=\relax -\let\unnumberedsection=\relax -\let\unnumberedsubsec=\relax -\let\unnumberedsubsection=\relax -\let\unnumberedsubsubsec=\relax -\let\unnumberedsubsubsection=\relax -\let\section=\relax -\let\subsec=\relax -\let\subsubsec=\relax -\let\subsection=\relax -\let\subsubsection=\relax -\let\appendix=\relax -\let\appendixsec=\relax -\let\appendixsection=\relax -\let\appendixsubsec=\relax -\let\appendixsubsection=\relax -\let\appendixsubsubsec=\relax -\let\appendixsubsubsection=\relax -\let\contents=\relax -\let\smallbook=\relax -\let\titlepage=\relax -} - -% Used in nested conditionals, where we have to parse the Texinfo source -% and so want to turn off most commands, in case they are used -% incorrectly. -% -\def\ignoremorecommands{% - \let\defcodeindex = \relax - \let\defcv = \relax - \let\deffn = \relax - \let\deffnx = \relax - \let\defindex = \relax - \let\defivar = \relax - \let\defmac = \relax - \let\defmethod = \relax - \let\defop = \relax - \let\defopt = \relax - \let\defspec = \relax - \let\deftp = \relax - \let\deftypefn = \relax - \let\deftypefun = \relax - \let\deftypevar = \relax - \let\deftypevr = \relax - \let\defun = \relax - \let\defvar = \relax - \let\defvr = \relax - \let\ref = \relax - \let\xref = \relax - \let\printindex = \relax - \let\pxref = \relax - \let\settitle = \relax - \let\setchapternewpage = \relax - \let\setchapterstyle = \relax - \let\everyheading = \relax - \let\evenheading = \relax - \let\oddheading = \relax - \let\everyfooting = \relax - \let\evenfooting = \relax - \let\oddfooting = \relax - \let\headings = \relax - \let\include = \relax - \let\lowersections = \relax - \let\down = \relax - \let\raisesections = \relax - \let\up = \relax - \let\set = \relax - \let\clear = \relax - \let\item = \relax -} - -% Ignore @ignore ... @end ignore. -% -\def\ignore{\doignore{ignore}} - -% Ignore @ifinfo, @ifhtml, @ifnottex, @html, @menu, and @direntry text. -% -\def\ifinfo{\doignore{ifinfo}} -\def\ifhtml{\doignore{ifhtml}} -\def\ifnottex{\doignore{ifnottex}} -\def\html{\doignore{html}} -\def\menu{\doignore{menu}} -\def\direntry{\doignore{direntry}} - -% @dircategory CATEGORY -- specify a category of the dir file -% which this file should belong to. Ignore this in TeX. -\let\dircategory = \comment - -% Ignore text until a line `@end #1'. -% -\def\doignore#1{\begingroup - % Don't complain about control sequences we have declared \outer. - \ignoresections - % - % Define a command to swallow text until we reach `@end #1'. - % This @ is a catcode 12 token (that is the normal catcode of @ in - % this texinfo.tex file). We change the catcode of @ below to match. - \long\def\doignoretext##1@end #1{\enddoignore}% - % - % Make sure that spaces turn into tokens that match what \doignoretext wants. - \catcode32 = 10 - % - % Ignore braces, too, so mismatched braces don't cause trouble. - \catcode`\{ = 9 - \catcode`\} = 9 - % - % We must not have @c interpreted as a control sequence. - \catcode`\@ = 12 - % - % Make the letter c a comment character so that the rest of the line - % will be ignored. This way, the document can have (for example) - % @c @end ifinfo - % and the @end ifinfo will be properly ignored. - % (We've just changed @ to catcode 12.) - \catcode`\c = 14 - % - % And now expand that command. - \doignoretext -} - -% What we do to finish off ignored text. -% -\def\enddoignore{\endgroup\ignorespaces}% - -\newif\ifwarnedobs\warnedobsfalse -\def\obstexwarn{% - \ifwarnedobs\relax\else - % We need to warn folks that they may have trouble with TeX 3.0. - % This uses \immediate\write16 rather than \message to get newlines. - \immediate\write16{} - \immediate\write16{WARNING: for users of Unix TeX 3.0!} - \immediate\write16{This manual trips a bug in TeX version 3.0 (tex hangs).} - \immediate\write16{If you are running another version of TeX, relax.} - \immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.} - \immediate\write16{ Then upgrade your TeX installation if you can.} - \immediate\write16{ (See ftp://ftp.gnu.org/pub/gnu/TeX.README.)} - \immediate\write16{If you are stuck with version 3.0, run the} - \immediate\write16{ script ``tex3patch'' from the Texinfo distribution} - \immediate\write16{ to use a workaround.} - \immediate\write16{} - \global\warnedobstrue - \fi -} - -% **In TeX 3.0, setting text in \nullfont hangs tex. For a -% workaround (which requires the file ``dummy.tfm'' to be installed), -% uncomment the following line: -%%%%%\font\nullfont=dummy\let\obstexwarn=\relax - -% Ignore text, except that we keep track of conditional commands for -% purposes of nesting, up to an `@end #1' command. -% -\def\nestedignore#1{% - \obstexwarn - % We must actually expand the ignored text to look for the @end - % command, so that nested ignore constructs work. Thus, we put the - % text into a \vbox and then do nothing with the result. To minimize - % the change of memory overflow, we follow the approach outlined on - % page 401 of the TeXbook: make the current font be a dummy font. - % - \setbox0 = \vbox\bgroup - % Don't complain about control sequences we have declared \outer. - \ignoresections - % - % Define `@end #1' to end the box, which will in turn undefine the - % @end command again. - \expandafter\def\csname E#1\endcsname{\egroup\ignorespaces}% - % - % We are going to be parsing Texinfo commands. Most cause no - % trouble when they are used incorrectly, but some commands do - % complicated argument parsing or otherwise get confused, so we - % undefine them. - % - % We can't do anything about stray @-signs, unfortunately; - % they'll produce `undefined control sequence' errors. - \ignoremorecommands - % - % Set the current font to be \nullfont, a TeX primitive, and define - % all the font commands to also use \nullfont. We don't use - % dummy.tfm, as suggested in the TeXbook, because not all sites - % might have that installed. Therefore, math mode will still - % produce output, but that should be an extremely small amount of - % stuff compared to the main input. - % - \nullfont - \let\tenrm = \nullfont \let\tenit = \nullfont \let\tensl = \nullfont - \let\tenbf = \nullfont \let\tentt = \nullfont \let\smallcaps = \nullfont - \let\tensf = \nullfont - % Similarly for index fonts (mostly for their use in - % smallexample) - \let\indrm = \nullfont \let\indit = \nullfont \let\indsl = \nullfont - \let\indbf = \nullfont \let\indtt = \nullfont \let\indsc = \nullfont - \let\indsf = \nullfont - % - % Don't complain when characters are missing from the fonts. - \tracinglostchars = 0 - % - % Don't bother to do space factor calculations. - \frenchspacing - % - % Don't report underfull hboxes. - \hbadness = 10000 - % - % Do minimal line-breaking. - \pretolerance = 10000 - % - % Do not execute instructions in @tex - \def\tex{\doignore{tex}}% - % Do not execute macro definitions. - % `c' is a comment character, so the word `macro' will get cut off. - \def\macro{\doignore{ma}}% -} - -% @set VAR sets the variable VAR to an empty value. -% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE. -% -% Since we want to separate VAR from REST-OF-LINE (which might be -% empty), we can't just use \parsearg; we have to insert a space of our -% own to delimit the rest of the line, and then take it out again if we -% didn't need it. Make sure the catcode of space is correct to avoid -% losing inside @example, for instance. -% -\def\set{\begingroup\catcode` =10 - \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR. - \parsearg\setxxx} -\def\setxxx#1{\setyyy#1 \endsetyyy} -\def\setyyy#1 #2\endsetyyy{% - \def\temp{#2}% - \ifx\temp\empty \global\expandafter\let\csname SET#1\endcsname = \empty - \else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted. - \fi - \endgroup -} -% Can't use \xdef to pre-expand #2 and save some time, since \temp or -% \next or other control sequences that we've defined might get us into -% an infinite loop. Consider `@set foo @cite{bar}'. -\def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}} - -% @clear VAR clears (i.e., unsets) the variable VAR. -% -\def\clear{\parsearg\clearxxx} -\def\clearxxx#1{\global\expandafter\let\csname SET#1\endcsname=\relax} - -% @value{foo} gets the text saved in variable foo. -% -{ - \catcode`\_ = \active - % - % We might end up with active _ or - characters in the argument if - % we're called from @code, as @code{@value{foo-bar_}}. So \let any - % such active characters to their normal equivalents. - \gdef\value{\begingroup - \catcode`\-=12 \catcode`\_=12 - \indexbreaks \let_\normalunderscore - \valuexxx} -} -\def\valuexxx#1{\expandablevalue{#1}\endgroup} - -% We have this subroutine so that we can handle at least some @value's -% properly in indexes (we \let\value to this in \indexdummies). Ones -% whose names contain - or _ still won't work, but we can't do anything -% about that. The command has to be fully expandable, since the result -% winds up in the index file. This means that if the variable's value -% contains other Texinfo commands, it's almost certain it will fail -% (although perhaps we could fix that with sufficient work to do a -% one-level expansion on the result, instead of complete). -% -\def\expandablevalue#1{% - \expandafter\ifx\csname SET#1\endcsname\relax - {[No value for ``#1'']}% - \else - \csname SET#1\endcsname - \fi -} - -% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined -% with @set. -% -\def\ifset{\parsearg\ifsetxxx} -\def\ifsetxxx #1{% - \expandafter\ifx\csname SET#1\endcsname\relax - \expandafter\ifsetfail - \else - \expandafter\ifsetsucceed - \fi -} -\def\ifsetsucceed{\conditionalsucceed{ifset}} -\def\ifsetfail{\nestedignore{ifset}} -\defineunmatchedend{ifset} - -% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been -% defined with @set, or has been undefined with @clear. -% -\def\ifclear{\parsearg\ifclearxxx} -\def\ifclearxxx #1{% - \expandafter\ifx\csname SET#1\endcsname\relax - \expandafter\ifclearsucceed - \else - \expandafter\ifclearfail - \fi -} -\def\ifclearsucceed{\conditionalsucceed{ifclear}} -\def\ifclearfail{\nestedignore{ifclear}} -\defineunmatchedend{ifclear} - -% @iftex, @ifnothtml, @ifnotinfo always succeed; we read the text -% following, through the first @end iftex (etc.). Make `@end iftex' -% (etc.) valid only after an @iftex. -% -\def\iftex{\conditionalsucceed{iftex}} -\def\ifnothtml{\conditionalsucceed{ifnothtml}} -\def\ifnotinfo{\conditionalsucceed{ifnotinfo}} -\defineunmatchedend{iftex} -\defineunmatchedend{ifnothtml} -\defineunmatchedend{ifnotinfo} - -% We can't just want to start a group at @iftex (for example) and end it -% at @end iftex, since then @set commands inside the conditional have no -% effect (they'd get reverted at the end of the group). So we must -% define \Eiftex to redefine itself to be its previous value. (We can't -% just define it to fail again with an ``unmatched end'' error, since -% the @ifset might be nested.) -% -\def\conditionalsucceed#1{% - \edef\temp{% - % Remember the current value of \E#1. - \let\nece{prevE#1} = \nece{E#1}% - % - % At the `@end #1', redefine \E#1 to be its previous value. - \def\nece{E#1}{\let\nece{E#1} = \nece{prevE#1}}% - }% - \temp -} - -% We need to expand lots of \csname's, but we don't want to expand the -% control sequences after we've constructed them. -% -\def\nece#1{\expandafter\noexpand\csname#1\endcsname} - % @asis just yields its argument. Used with @table, for example. % \def\asis#1{#1} @@ -1962,364 +1617,713 @@ where each line of input produces a line of output.} \itemizey {#1}{\Eitemize} } -\def\itemizey #1#2{% -\aboveenvbreak % -\itemmax=\itemindent % -\advance \itemmax by -\itemmargin % -\advance \leftskip by \itemindent % -\exdentamount=\itemindent -\parindent = 0pt % -\parskip = \smallskipamount % -\ifdim \parskip=0pt \parskip=2pt \fi% -\def#2{\endgraf\afterenvbreak\endgroup}% -\def\itemcontents{#1}% -\let\item=\itemizeitem} +\def\itemizey #1#2{% +\aboveenvbreak % +\itemmax=\itemindent % +\advance \itemmax by -\itemmargin % +\advance \leftskip by \itemindent % +\exdentamount=\itemindent +\parindent = 0pt % +\parskip = \smallskipamount % +\ifdim \parskip=0pt \parskip=2pt \fi% +\def#2{\endgraf\afterenvbreak\endgroup}% +\def\itemcontents{#1}% +\let\item=\itemizeitem} + +% Set sfcode to normal for the chars that usually have another value. +% These are `.?!:;,' +\def\frenchspacing{\sfcode46=1000 \sfcode63=1000 \sfcode33=1000 + \sfcode58=1000 \sfcode59=1000 \sfcode44=1000 } + +% \splitoff TOKENS\endmark defines \first to be the first token in +% TOKENS, and \rest to be the remainder. +% +\def\splitoff#1#2\endmark{\def\first{#1}\def\rest{#2}}% + +% Allow an optional argument of an uppercase letter, lowercase letter, +% or number, to specify the first label in the enumerated list. No +% argument is the same as `1'. +% +\def\enumerate{\parsearg\enumeratezzz} +\def\enumeratezzz #1{\enumeratey #1 \endenumeratey} +\def\enumeratey #1 #2\endenumeratey{% + \begingroup % ended by the @end enumerate + % + % If we were given no argument, pretend we were given `1'. + \def\thearg{#1}% + \ifx\thearg\empty \def\thearg{1}\fi + % + % Detect if the argument is a single token. If so, it might be a + % letter. Otherwise, the only valid thing it can be is a number. + % (We will always have one token, because of the test we just made. + % This is a good thing, since \splitoff doesn't work given nothing at + % all -- the first parameter is undelimited.) + \expandafter\splitoff\thearg\endmark + \ifx\rest\empty + % Only one token in the argument. It could still be anything. + % A ``lowercase letter'' is one whose \lccode is nonzero. + % An ``uppercase letter'' is one whose \lccode is both nonzero, and + % not equal to itself. + % Otherwise, we assume it's a number. + % + % We need the \relax at the end of the \ifnum lines to stop TeX from + % continuing to look for a . + % + \ifnum\lccode\expandafter`\thearg=0\relax + \numericenumerate % a number (we hope) + \else + % It's a letter. + \ifnum\lccode\expandafter`\thearg=\expandafter`\thearg\relax + \lowercaseenumerate % lowercase letter + \else + \uppercaseenumerate % uppercase letter + \fi + \fi + \else + % Multiple tokens in the argument. We hope it's a number. + \numericenumerate + \fi +} + +% An @enumerate whose labels are integers. The starting integer is +% given in \thearg. +% +\def\numericenumerate{% + \itemno = \thearg + \startenumeration{\the\itemno}% +} + +% The starting (lowercase) letter is in \thearg. +\def\lowercaseenumerate{% + \itemno = \expandafter`\thearg + \startenumeration{% + % Be sure we're not beyond the end of the alphabet. + \ifnum\itemno=0 + \errmessage{No more lowercase letters in @enumerate; get a bigger + alphabet}% + \fi + \char\lccode\itemno + }% +} + +% The starting (uppercase) letter is in \thearg. +\def\uppercaseenumerate{% + \itemno = \expandafter`\thearg + \startenumeration{% + % Be sure we're not beyond the end of the alphabet. + \ifnum\itemno=0 + \errmessage{No more uppercase letters in @enumerate; get a bigger + alphabet} + \fi + \char\uccode\itemno + }% +} + +% Call itemizey, adding a period to the first argument and supplying the +% common last two arguments. Also subtract one from the initial value in +% \itemno, since @item increments \itemno. +% +\def\startenumeration#1{% + \advance\itemno by -1 + \itemizey{#1.}\Eenumerate\flushcr +} + +% @alphaenumerate and @capsenumerate are abbreviations for giving an arg +% to @enumerate. +% +\def\alphaenumerate{\enumerate{a}} +\def\capsenumerate{\enumerate{A}} +\def\Ealphaenumerate{\Eenumerate} +\def\Ecapsenumerate{\Eenumerate} + +% Definition of @item while inside @itemize. + +\def\itemizeitem{% +\advance\itemno by 1 +{\let\par=\endgraf \smallbreak}% +\ifhmode \errmessage{In hmode at itemizeitem}\fi +{\parskip=0in \hskip 0pt +\hbox to 0pt{\hss \itemcontents\hskip \itemmargin}% +\vadjust{\penalty 1200}}% +\flushcr} + +% @multitable macros +% Amy Hendrickson, 8/18/94, 3/6/96 +% +% @multitable ... @end multitable will make as many columns as desired. +% Contents of each column will wrap at width given in preamble. Width +% can be specified either with sample text given in a template line, +% or in percent of \hsize, the current width of text on page. + +% Table can continue over pages but will only break between lines. + +% To make preamble: +% +% Either define widths of columns in terms of percent of \hsize: +% @multitable @columnfractions .25 .3 .45 +% @item ... +% +% Numbers following @columnfractions are the percent of the total +% current hsize to be used for each column. You may use as many +% columns as desired. + + +% Or use a template: +% @multitable {Column 1 template} {Column 2 template} {Column 3 template} +% @item ... +% using the widest term desired in each column. +% +% For those who want to use more than one line's worth of words in +% the preamble, break the line within one argument and it +% will parse correctly, i.e., +% +% @multitable {Column 1 template} {Column 2 template} {Column 3 +% template} +% Not: +% @multitable {Column 1 template} {Column 2 template} +% {Column 3 template} + +% Each new table line starts with @item, each subsequent new column +% starts with @tab. Empty columns may be produced by supplying @tab's +% with nothing between them for as many times as empty columns are needed, +% ie, @tab@tab@tab will produce two empty columns. + +% @item, @tab, @multitable or @end multitable do not need to be on their +% own lines, but it will not hurt if they are. + +% Sample multitable: -% Set sfcode to normal for the chars that usually have another value. -% These are `.?!:;,' -\def\frenchspacing{\sfcode46=1000 \sfcode63=1000 \sfcode33=1000 - \sfcode58=1000 \sfcode59=1000 \sfcode44=1000 } +% @multitable {Column 1 template} {Column 2 template} {Column 3 template} +% @item first col stuff @tab second col stuff @tab third col +% @item +% first col stuff +% @tab +% second col stuff +% @tab +% third col +% @item first col stuff @tab second col stuff +% @tab Many paragraphs of text may be used in any column. +% +% They will wrap at the width determined by the template. +% @item@tab@tab This will be in third column. +% @end multitable -% \splitoff TOKENS\endmark defines \first to be the first token in -% TOKENS, and \rest to be the remainder. +% Default dimensions may be reset by user. +% @multitableparskip is vertical space between paragraphs in table. +% @multitableparindent is paragraph indent in table. +% @multitablecolmargin is horizontal space to be left between columns. +% @multitablelinespace is space to leave between table items, baseline +% to baseline. +% 0pt means it depends on current normal line spacing. % -\def\splitoff#1#2\endmark{\def\first{#1}\def\rest{#2}}% +\newskip\multitableparskip +\newskip\multitableparindent +\newdimen\multitablecolspace +\newskip\multitablelinespace +\multitableparskip=0pt +\multitableparindent=6pt +\multitablecolspace=12pt +\multitablelinespace=0pt -% Allow an optional argument of an uppercase letter, lowercase letter, -% or number, to specify the first label in the enumerated list. No -% argument is the same as `1'. +% Macros used to set up halign preamble: % -\def\enumerate{\parsearg\enumeratezzz} -\def\enumeratezzz #1{\enumeratey #1 \endenumeratey} -\def\enumeratey #1 #2\endenumeratey{% - \begingroup % ended by the @end enumerate - % - % If we were given no argument, pretend we were given `1'. - \def\thearg{#1}% - \ifx\thearg\empty \def\thearg{1}\fi - % - % Detect if the argument is a single token. If so, it might be a - % letter. Otherwise, the only valid thing it can be is a number. - % (We will always have one token, because of the test we just made. - % This is a good thing, since \splitoff doesn't work given nothing at - % all -- the first parameter is undelimited.) - \expandafter\splitoff\thearg\endmark - \ifx\rest\empty - % Only one token in the argument. It could still be anything. - % A ``lowercase letter'' is one whose \lccode is nonzero. - % An ``uppercase letter'' is one whose \lccode is both nonzero, and - % not equal to itself. - % Otherwise, we assume it's a number. - % - % We need the \relax at the end of the \ifnum lines to stop TeX from - % continuing to look for a . - % - \ifnum\lccode\expandafter`\thearg=0\relax - \numericenumerate % a number (we hope) +\let\endsetuptable\relax +\def\xendsetuptable{\endsetuptable} +\let\columnfractions\relax +\def\xcolumnfractions{\columnfractions} +\newif\ifsetpercent + +% #1 is the part of the @columnfraction before the decimal point, which +% is presumably either 0 or the empty string (but we don't check, we +% just throw it away). #2 is the decimal part, which we use as the +% percent of \hsize for this column. +\def\pickupwholefraction#1.#2 {% + \global\advance\colcount by 1 + \expandafter\xdef\csname col\the\colcount\endcsname{.#2\hsize}% + \setuptable +} + +\newcount\colcount +\def\setuptable#1{% + \def\firstarg{#1}% + \ifx\firstarg\xendsetuptable + \let\go = \relax + \else + \ifx\firstarg\xcolumnfractions + \global\setpercenttrue \else - % It's a letter. - \ifnum\lccode\expandafter`\thearg=\expandafter`\thearg\relax - \lowercaseenumerate % lowercase letter + \ifsetpercent + \let\go\pickupwholefraction \else - \uppercaseenumerate % uppercase letter + \global\advance\colcount by 1 + \setbox0=\hbox{#1\unskip }% Add a normal word space as a separator; + % typically that is always in the input, anyway. + \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}% \fi \fi - \else - % Multiple tokens in the argument. We hope it's a number. - \numericenumerate + \ifx\go\pickupwholefraction + % Put the argument back for the \pickupwholefraction call, so + % we'll always have a period there to be parsed. + \def\go{\pickupwholefraction#1}% + \else + \let\go = \setuptable + \fi% \fi + \go } -% An @enumerate whose labels are integers. The starting integer is -% given in \thearg. -% -\def\numericenumerate{% - \itemno = \thearg - \startenumeration{\the\itemno}% -} +% multitable syntax +\def\tab{&\hskip1sp\relax} % 2/2/96 + % tiny skip here makes sure this column space is + % maintained, even if it is never used. -% The starting (lowercase) letter is in \thearg. -\def\lowercaseenumerate{% - \itemno = \expandafter`\thearg - \startenumeration{% - % Be sure we're not beyond the end of the alphabet. - \ifnum\itemno=0 - \errmessage{No more lowercase letters in @enumerate; get a bigger - alphabet}% +% @multitable ... @end multitable definitions: +% +\def\multitable{\parsearg\dotable} +\def\dotable#1{\bgroup + \vskip\parskip + \let\item\crcr + \tolerance=9500 + \hbadness=9500 + \setmultitablespacing + \parskip=\multitableparskip + \parindent=\multitableparindent + \overfullrule=0pt + \global\colcount=0 + \def\Emultitable{\global\setpercentfalse\cr\egroup\egroup}% + % + % To parse everything between @multitable and @item: + \setuptable#1 \endsetuptable + % + % \everycr will reset column counter, \colcount, at the end of + % each line. Every column entry will cause \colcount to advance by one. + % The table preamble + % looks at the current \colcount to find the correct column width. + \everycr{\noalign{% + % + % \filbreak%% keeps underfull box messages off when table breaks over pages. + % Maybe so, but it also creates really weird page breaks when the table + % breaks over pages. Wouldn't \vfil be better? Wait until the problem + % manifests itself, so it can be fixed for real --karl. + \global\colcount=0\relax}}% + % + % This preamble sets up a generic column definition, which will + % be used as many times as user calls for columns. + % \vtop will set a single line and will also let text wrap and + % continue for many paragraphs if desired. + \halign\bgroup&\global\advance\colcount by 1\relax + \multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname + % + % In order to keep entries from bumping into each other + % we will add a \leftskip of \multitablecolspace to all columns after + % the first one. + % + % If a template has been used, we will add \multitablecolspace + % to the width of each template entry. + % + % If the user has set preamble in terms of percent of \hsize we will + % use that dimension as the width of the column, and the \leftskip + % will keep entries from bumping into each other. Table will start at + % left margin and final column will justify at right margin. + % + % Make sure we don't inherit \rightskip from the outer environment. + \rightskip=0pt + \ifnum\colcount=1 + % The first column will be indented with the surrounding text. + \advance\hsize by\leftskip + \else + \ifsetpercent \else + % If user has not set preamble in terms of percent of \hsize + % we will advance \hsize by \multitablecolspace. + \advance\hsize by \multitablecolspace \fi - \char\lccode\itemno - }% + % In either case we will make \leftskip=\multitablecolspace: + \leftskip=\multitablecolspace + \fi + % Ignoring space at the beginning and end avoids an occasional spurious + % blank line, when TeX decides to break the line at the space before the + % box from the multistrut, so the strut ends up on a line by itself. + % For example: + % @multitable @columnfractions .11 .89 + % @item @code{#} + % @tab Legal holiday which is valid in major parts of the whole country. + % Is automatically provided with highlighting sequences respectively marking + % characters. + \noindent\ignorespaces##\unskip\multistrut}\cr } -% The starting (uppercase) letter is in \thearg. -\def\uppercaseenumerate{% - \itemno = \expandafter`\thearg - \startenumeration{% - % Be sure we're not beyond the end of the alphabet. - \ifnum\itemno=0 - \errmessage{No more uppercase letters in @enumerate; get a bigger - alphabet} - \fi - \char\uccode\itemno - }% +\def\setmultitablespacing{% test to see if user has set \multitablelinespace. +% If so, do nothing. If not, give it an appropriate dimension based on +% current baselineskip. +\ifdim\multitablelinespace=0pt +%% strut to put in table in case some entry doesn't have descenders, +%% to keep lines equally spaced +\let\multistrut = \strut +%% Test to see if parskip is larger than space between lines of +%% table. If not, do nothing. +%% If so, set to same dimension as multitablelinespace. +\else +\gdef\multistrut{\vrule height\multitablelinespace depth\dp0 +width0pt\relax} \fi +\ifdim\multitableparskip>\multitablelinespace +\global\multitableparskip=\multitablelinespace +\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller + %% than skip between lines in the table. +\fi% +\ifdim\multitableparskip=0pt +\global\multitableparskip=\multitablelinespace +\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller + %% than skip between lines in the table. +\fi} + + +\message{conditionals,} +% Prevent errors for section commands. +% Used in @ignore and in failing conditionals. +\def\ignoresections{% + \let\chapter=\relax + \let\unnumbered=\relax + \let\top=\relax + \let\unnumberedsec=\relax + \let\unnumberedsection=\relax + \let\unnumberedsubsec=\relax + \let\unnumberedsubsection=\relax + \let\unnumberedsubsubsec=\relax + \let\unnumberedsubsubsection=\relax + \let\section=\relax + \let\subsec=\relax + \let\subsubsec=\relax + \let\subsection=\relax + \let\subsubsection=\relax + \let\appendix=\relax + \let\appendixsec=\relax + \let\appendixsection=\relax + \let\appendixsubsec=\relax + \let\appendixsubsection=\relax + \let\appendixsubsubsec=\relax + \let\appendixsubsubsection=\relax + \let\contents=\relax + \let\smallbook=\relax + \let\titlepage=\relax } -% Call itemizey, adding a period to the first argument and supplying the -% common last two arguments. Also subtract one from the initial value in -% \itemno, since @item increments \itemno. +% Used in nested conditionals, where we have to parse the Texinfo source +% and so want to turn off most commands, in case they are used +% incorrectly. % -\def\startenumeration#1{% - \advance\itemno by -1 - \itemizey{#1.}\Eenumerate\flushcr +\def\ignoremorecommands{% + \let\defcodeindex = \relax + \let\defcv = \relax + \let\deffn = \relax + \let\deffnx = \relax + \let\defindex = \relax + \let\defivar = \relax + \let\defmac = \relax + \let\defmethod = \relax + \let\defop = \relax + \let\defopt = \relax + \let\defspec = \relax + \let\deftp = \relax + \let\deftypefn = \relax + \let\deftypefun = \relax + \let\deftypevar = \relax + \let\deftypevr = \relax + \let\defun = \relax + \let\defvar = \relax + \let\defvr = \relax + \let\ref = \relax + \let\xref = \relax + \let\printindex = \relax + \let\pxref = \relax + \let\settitle = \relax + \let\setchapternewpage = \relax + \let\setchapterstyle = \relax + \let\everyheading = \relax + \let\evenheading = \relax + \let\oddheading = \relax + \let\everyfooting = \relax + \let\evenfooting = \relax + \let\oddfooting = \relax + \let\headings = \relax + \let\include = \relax + \let\lowersections = \relax + \let\down = \relax + \let\raisesections = \relax + \let\up = \relax + \let\set = \relax + \let\clear = \relax + \let\item = \relax } -% @alphaenumerate and @capsenumerate are abbreviations for giving an arg -% to @enumerate. +% Ignore @ignore ... @end ignore. % -\def\alphaenumerate{\enumerate{a}} -\def\capsenumerate{\enumerate{A}} -\def\Ealphaenumerate{\Eenumerate} -\def\Ecapsenumerate{\Eenumerate} - -% Definition of @item while inside @itemize. - -\def\itemizeitem{% -\advance\itemno by 1 -{\let\par=\endgraf \smallbreak}% -\ifhmode \errmessage{In hmode at itemizeitem}\fi -{\parskip=0in \hskip 0pt -\hbox to 0pt{\hss \itemcontents\hskip \itemmargin}% -\vadjust{\penalty 1200}}% -\flushcr} +\def\ignore{\doignore{ignore}} -% @multitable macros -% Amy Hendrickson, 8/18/94, 3/6/96 +% Ignore @ifinfo, @ifhtml, @ifnottex, @html, @menu, and @direntry text. % -% @multitable ... @end multitable will make as many columns as desired. -% Contents of each column will wrap at width given in preamble. Width -% can be specified either with sample text given in a template line, -% or in percent of \hsize, the current width of text on page. +\def\ifinfo{\doignore{ifinfo}} +\def\ifhtml{\doignore{ifhtml}} +\def\ifnottex{\doignore{ifnottex}} +\def\html{\doignore{html}} +\def\menu{\doignore{menu}} +\def\direntry{\doignore{direntry}} -% Table can continue over pages but will only break between lines. +% @dircategory CATEGORY -- specify a category of the dir file +% which this file should belong to. Ignore this in TeX. +\let\dircategory = \comment -% To make preamble: -% -% Either define widths of columns in terms of percent of \hsize: -% @multitable @columnfractions .25 .3 .45 -% @item ... +% Ignore text until a line `@end #1'. % -% Numbers following @columnfractions are the percent of the total -% current hsize to be used for each column. You may use as many -% columns as desired. - +\def\doignore#1{\begingroup + % Don't complain about control sequences we have declared \outer. + \ignoresections + % + % Define a command to swallow text until we reach `@end #1'. + % This @ is a catcode 12 token (that is the normal catcode of @ in + % this texinfo.tex file). We change the catcode of @ below to match. + \long\def\doignoretext##1@end #1{\enddoignore}% + % + % Make sure that spaces turn into tokens that match what \doignoretext wants. + \catcode32 = 10 + % + % Ignore braces, too, so mismatched braces don't cause trouble. + \catcode`\{ = 9 + \catcode`\} = 9 + % + % We must not have @c interpreted as a control sequence. + \catcode`\@ = 12 + % + % Make the letter c a comment character so that the rest of the line + % will be ignored. This way, the document can have (for example) + % @c @end ifinfo + % and the @end ifinfo will be properly ignored. + % (We've just changed @ to catcode 12.) + \catcode`\c = 14 + % + % And now expand that command. + \doignoretext +} -% Or use a template: -% @multitable {Column 1 template} {Column 2 template} {Column 3 template} -% @item ... -% using the widest term desired in each column. -% -% For those who want to use more than one line's worth of words in -% the preamble, break the line within one argument and it -% will parse correctly, i.e., +% What we do to finish off ignored text. % -% @multitable {Column 1 template} {Column 2 template} {Column 3 -% template} -% Not: -% @multitable {Column 1 template} {Column 2 template} -% {Column 3 template} - -% Each new table line starts with @item, each subsequent new column -% starts with @tab. Empty columns may be produced by supplying @tab's -% with nothing between them for as many times as empty columns are needed, -% ie, @tab@tab@tab will produce two empty columns. +\def\enddoignore{\endgroup\ignorespaces}% -% @item, @tab, @multitable or @end multitable do not need to be on their -% own lines, but it will not hurt if they are. +\newif\ifwarnedobs\warnedobsfalse +\def\obstexwarn{% + \ifwarnedobs\relax\else + % We need to warn folks that they may have trouble with TeX 3.0. + % This uses \immediate\write16 rather than \message to get newlines. + \immediate\write16{} + \immediate\write16{WARNING: for users of Unix TeX 3.0!} + \immediate\write16{This manual trips a bug in TeX version 3.0 (tex hangs).} + \immediate\write16{If you are running another version of TeX, relax.} + \immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.} + \immediate\write16{ Then upgrade your TeX installation if you can.} + \immediate\write16{ (See ftp://ftp.gnu.org/pub/gnu/TeX.README.)} + \immediate\write16{If you are stuck with version 3.0, run the} + \immediate\write16{ script ``tex3patch'' from the Texinfo distribution} + \immediate\write16{ to use a workaround.} + \immediate\write16{} + \global\warnedobstrue + \fi +} -% Sample multitable: +% **In TeX 3.0, setting text in \nullfont hangs tex. For a +% workaround (which requires the file ``dummy.tfm'' to be installed), +% uncomment the following line: +%%%%%\font\nullfont=dummy\let\obstexwarn=\relax -% @multitable {Column 1 template} {Column 2 template} {Column 3 template} -% @item first col stuff @tab second col stuff @tab third col -% @item -% first col stuff -% @tab -% second col stuff -% @tab -% third col -% @item first col stuff @tab second col stuff -% @tab Many paragraphs of text may be used in any column. +% Ignore text, except that we keep track of conditional commands for +% purposes of nesting, up to an `@end #1' command. % -% They will wrap at the width determined by the template. -% @item@tab@tab This will be in third column. -% @end multitable +\def\nestedignore#1{% + \obstexwarn + % We must actually expand the ignored text to look for the @end + % command, so that nested ignore constructs work. Thus, we put the + % text into a \vbox and then do nothing with the result. To minimize + % the change of memory overflow, we follow the approach outlined on + % page 401 of the TeXbook: make the current font be a dummy font. + % + \setbox0 = \vbox\bgroup + % Don't complain about control sequences we have declared \outer. + \ignoresections + % + % Define `@end #1' to end the box, which will in turn undefine the + % @end command again. + \expandafter\def\csname E#1\endcsname{\egroup\ignorespaces}% + % + % We are going to be parsing Texinfo commands. Most cause no + % trouble when they are used incorrectly, but some commands do + % complicated argument parsing or otherwise get confused, so we + % undefine them. + % + % We can't do anything about stray @-signs, unfortunately; + % they'll produce `undefined control sequence' errors. + \ignoremorecommands + % + % Set the current font to be \nullfont, a TeX primitive, and define + % all the font commands to also use \nullfont. We don't use + % dummy.tfm, as suggested in the TeXbook, because not all sites + % might have that installed. Therefore, math mode will still + % produce output, but that should be an extremely small amount of + % stuff compared to the main input. + % + \nullfont + \let\tenrm = \nullfont \let\tenit = \nullfont \let\tensl = \nullfont + \let\tenbf = \nullfont \let\tentt = \nullfont \let\smallcaps = \nullfont + \let\tensf = \nullfont + % Similarly for index fonts (mostly for their use in + % smallexample) + \let\indrm = \nullfont \let\indit = \nullfont \let\indsl = \nullfont + \let\indbf = \nullfont \let\indtt = \nullfont \let\indsc = \nullfont + \let\indsf = \nullfont + % + % Don't complain when characters are missing from the fonts. + \tracinglostchars = 0 + % + % Don't bother to do space factor calculations. + \frenchspacing + % + % Don't report underfull hboxes. + \hbadness = 10000 + % + % Do minimal line-breaking. + \pretolerance = 10000 + % + % Do not execute instructions in @tex + \def\tex{\doignore{tex}}% + % Do not execute macro definitions. + % `c' is a comment character, so the word `macro' will get cut off. + \def\macro{\doignore{ma}}% +} -% Default dimensions may be reset by user. -% @multitableparskip is vertical space between paragraphs in table. -% @multitableparindent is paragraph indent in table. -% @multitablecolmargin is horizontal space to be left between columns. -% @multitablelinespace is space to leave between table items, baseline -% to baseline. -% 0pt means it depends on current normal line spacing. +% @set VAR sets the variable VAR to an empty value. +% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE. % -\newskip\multitableparskip -\newskip\multitableparindent -\newdimen\multitablecolspace -\newskip\multitablelinespace -\multitableparskip=0pt -\multitableparindent=6pt -\multitablecolspace=12pt -\multitablelinespace=0pt +% Since we want to separate VAR from REST-OF-LINE (which might be +% empty), we can't just use \parsearg; we have to insert a space of our +% own to delimit the rest of the line, and then take it out again if we +% didn't need it. Make sure the catcode of space is correct to avoid +% losing inside @example, for instance. +% +\def\set{\begingroup\catcode` =10 + \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR. + \parsearg\setxxx} +\def\setxxx#1{\setyyy#1 \endsetyyy} +\def\setyyy#1 #2\endsetyyy{% + \def\temp{#2}% + \ifx\temp\empty \global\expandafter\let\csname SET#1\endcsname = \empty + \else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted. + \fi + \endgroup +} +% Can't use \xdef to pre-expand #2 and save some time, since \temp or +% \next or other control sequences that we've defined might get us into +% an infinite loop. Consider `@set foo @cite{bar}'. +\def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}} -% Macros used to set up halign preamble: +% @clear VAR clears (i.e., unsets) the variable VAR. % -\let\endsetuptable\relax -\def\xendsetuptable{\endsetuptable} -\let\columnfractions\relax -\def\xcolumnfractions{\columnfractions} -\newif\ifsetpercent +\def\clear{\parsearg\clearxxx} +\def\clearxxx#1{\global\expandafter\let\csname SET#1\endcsname=\relax} -% #1 is the part of the @columnfraction before the decimal point, which -% is presumably either 0 or the empty string (but we don't check, we -% just throw it away). #2 is the decimal part, which we use as the -% percent of \hsize for this column. -\def\pickupwholefraction#1.#2 {% - \global\advance\colcount by 1 - \expandafter\xdef\csname col\the\colcount\endcsname{.#2\hsize}% - \setuptable +% @value{foo} gets the text saved in variable foo. +{ + \catcode`\_ = \active + % + % We might end up with active _ or - characters in the argument if + % we're called from @code, as @code{@value{foo-bar_}}. So \let any + % such active characters to their normal equivalents. + \gdef\value{\begingroup + \catcode`\-=12 \catcode`\_=12 + \indexbreaks \let_\normalunderscore + \valuexxx} } +\def\valuexxx#1{\expandablevalue{#1}\endgroup} -\newcount\colcount -\def\setuptable#1{% - \def\firstarg{#1}% - \ifx\firstarg\xendsetuptable - \let\go = \relax +% We have this subroutine so that we can handle at least some @value's +% properly in indexes (we \let\value to this in \indexdummies). Ones +% whose names contain - or _ still won't work, but we can't do anything +% about that. The command has to be fully expandable, since the result +% winds up in the index file. This means that if the variable's value +% contains other Texinfo commands, it's almost certain it will fail +% (although perhaps we could fix that with sufficient work to do a +% one-level expansion on the result, instead of complete). +% +\def\expandablevalue#1{% + \expandafter\ifx\csname SET#1\endcsname\relax + {[No value for ``#1'']}% \else - \ifx\firstarg\xcolumnfractions - \global\setpercenttrue - \else - \ifsetpercent - \let\go\pickupwholefraction - \else - \global\advance\colcount by 1 - \setbox0=\hbox{#1\unskip }% Add a normal word space as a separator; - % typically that is always in the input, anyway. - \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}% - \fi - \fi - \ifx\go\pickupwholefraction - % Put the argument back for the \pickupwholefraction call, so - % we'll always have a period there to be parsed. - \def\go{\pickupwholefraction#1}% - \else - \let\go = \setuptable - \fi% + \csname SET#1\endcsname \fi - \go } -% multitable syntax -\def\tab{&\hskip1sp\relax} % 2/2/96 - % tiny skip here makes sure this column space is - % maintained, even if it is never used. +% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined +% with @set. +% +\def\ifset{\parsearg\ifsetxxx} +\def\ifsetxxx #1{% + \expandafter\ifx\csname SET#1\endcsname\relax + \expandafter\ifsetfail + \else + \expandafter\ifsetsucceed + \fi +} +\def\ifsetsucceed{\conditionalsucceed{ifset}} +\def\ifsetfail{\nestedignore{ifset}} +\defineunmatchedend{ifset} -% @multitable ... @end multitable definitions: +% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been +% defined with @set, or has been undefined with @clear. % -\def\multitable{\parsearg\dotable} -\def\dotable#1{\bgroup - \vskip\parskip - \let\item\crcr - \tolerance=9500 - \hbadness=9500 - \setmultitablespacing - \parskip=\multitableparskip - \parindent=\multitableparindent - \overfullrule=0pt - \global\colcount=0 - \def\Emultitable{\global\setpercentfalse\cr\egroup\egroup}% - % - % To parse everything between @multitable and @item: - \setuptable#1 \endsetuptable - % - % \everycr will reset column counter, \colcount, at the end of - % each line. Every column entry will cause \colcount to advance by one. - % The table preamble - % looks at the current \colcount to find the correct column width. - \everycr{\noalign{% - % - % \filbreak%% keeps underfull box messages off when table breaks over pages. - % Maybe so, but it also creates really weird page breaks when the table - % breaks over pages. Wouldn't \vfil be better? Wait until the problem - % manifests itself, so it can be fixed for real --karl. - \global\colcount=0\relax}}% - % - % This preamble sets up a generic column definition, which will - % be used as many times as user calls for columns. - % \vtop will set a single line and will also let text wrap and - % continue for many paragraphs if desired. - \halign\bgroup&\global\advance\colcount by 1\relax - \multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname - % - % In order to keep entries from bumping into each other - % we will add a \leftskip of \multitablecolspace to all columns after - % the first one. - % - % If a template has been used, we will add \multitablecolspace - % to the width of each template entry. - % - % If the user has set preamble in terms of percent of \hsize we will - % use that dimension as the width of the column, and the \leftskip - % will keep entries from bumping into each other. Table will start at - % left margin and final column will justify at right margin. - % - % Make sure we don't inherit \rightskip from the outer environment. - \rightskip=0pt - \ifnum\colcount=1 - % The first column will be indented with the surrounding text. - \advance\hsize by\leftskip +\def\ifclear{\parsearg\ifclearxxx} +\def\ifclearxxx #1{% + \expandafter\ifx\csname SET#1\endcsname\relax + \expandafter\ifclearsucceed \else - \ifsetpercent \else - % If user has not set preamble in terms of percent of \hsize - % we will advance \hsize by \multitablecolspace. - \advance\hsize by \multitablecolspace - \fi - % In either case we will make \leftskip=\multitablecolspace: - \leftskip=\multitablecolspace + \expandafter\ifclearfail \fi - % Ignoring space at the beginning and end avoids an occasional spurious - % blank line, when TeX decides to break the line at the space before the - % box from the multistrut, so the strut ends up on a line by itself. - % For example: - % @multitable @columnfractions .11 .89 - % @item @code{#} - % @tab Legal holiday which is valid in major parts of the whole country. - % Is automatically provided with highlighting sequences respectively marking - % characters. - \noindent\ignorespaces##\unskip\multistrut}\cr } +\def\ifclearsucceed{\conditionalsucceed{ifclear}} +\def\ifclearfail{\nestedignore{ifclear}} +\defineunmatchedend{ifclear} -\def\setmultitablespacing{% test to see if user has set \multitablelinespace. -% If so, do nothing. If not, give it an appropriate dimension based on -% current baselineskip. -\ifdim\multitablelinespace=0pt -%% strut to put in table in case some entry doesn't have descenders, -%% to keep lines equally spaced -\let\multistrut = \strut -%% Test to see if parskip is larger than space between lines of -%% table. If not, do nothing. -%% If so, set to same dimension as multitablelinespace. -\else -\gdef\multistrut{\vrule height\multitablelinespace depth\dp0 -width0pt\relax} \fi -\ifdim\multitableparskip>\multitablelinespace -\global\multitableparskip=\multitablelinespace -\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller - %% than skip between lines in the table. -\fi% -\ifdim\multitableparskip=0pt -\global\multitableparskip=\multitablelinespace -\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller - %% than skip between lines in the table. -\fi} +% @iftex, @ifnothtml, @ifnotinfo always succeed; we read the text +% following, through the first @end iftex (etc.). Make `@end iftex' +% (etc.) valid only after an @iftex. +% +\def\iftex{\conditionalsucceed{iftex}} +\def\ifnothtml{\conditionalsucceed{ifnothtml}} +\def\ifnotinfo{\conditionalsucceed{ifnotinfo}} +\defineunmatchedend{iftex} +\defineunmatchedend{ifnothtml} +\defineunmatchedend{ifnotinfo} + +% We can't just want to start a group at @iftex (for example) and end it +% at @end iftex, since then @set commands inside the conditional have no +% effect (they'd get reverted at the end of the group). So we must +% define \Eiftex to redefine itself to be its previous value. (We can't +% just define it to fail again with an ``unmatched end'' error, since +% the @ifset might be nested.) +% +\def\conditionalsucceed#1{% + \edef\temp{% + % Remember the current value of \E#1. + \let\nece{prevE#1} = \nece{E#1}% + % + % At the `@end #1', redefine \E#1 to be its previous value. + \def\nece{E#1}{\let\nece{E#1} = \nece{prevE#1}}% + }% + \temp +} + +% We need to expand lots of \csname's, but we don't want to expand the +% control sequences after we've constructed them. +% +\def\nece#1{\expandafter\noexpand\csname#1\endcsname} + +% @defininfoenclose. +\let\definfoenclose=\comment \message{indexing,} @@ -4788,6 +4792,11 @@ width0pt\relax} \fi \def\turnoffmacros{\begingroup \def\do##1{\let\noexpand##1=\relax}% \edef\next{\macrolist}\expandafter\endgroup\next} + +% @alias. +\def\alias#1=#2{\let#1=#2} + + \message{cross references,} \newwrite\auxfile -- cgit v1.2.3