From 74d4418f1cdd4ba561dc717fb74a719b828ce96d Mon Sep 17 00:00:00 2001 From: Paul Smith Date: Mon, 18 Aug 1997 15:19:04 +0000 Subject: Removed files that are no longer needed now that we use automake. --- Makefile.in | 308 ----- README | 37 - aclocal.m4 | 19 - build.sh.in | 69 -- compatMakefile | 274 ----- config.h.in | 276 ----- configure | 3501 -------------------------------------------------------- 7 files changed, 4484 deletions(-) delete mode 100644 Makefile.in delete mode 100644 README delete mode 100644 aclocal.m4 delete mode 100644 build.sh.in delete mode 100644 compatMakefile delete mode 100644 config.h.in delete mode 100755 configure diff --git a/Makefile.in b/Makefile.in deleted file mode 100644 index 7178155..0000000 --- a/Makefile.in +++ /dev/null @@ -1,308 +0,0 @@ -# NOTE: If you have no `make' program at all to process this makefile, run -# `build.sh' instead. -# -# Copyright (C) 1988,89,91,92,93,94,95,96 Free Software Foundation, Inc. -# This file is part of GNU Make. -# -# GNU Make is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. -# -# GNU Make is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Make; see the file COPYING. If not, write to -# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - -# -# Makefile for GNU Make -# - -# Ultrix 2.2 make doesn't expand the value of VPATH. -VPATH = @srcdir@ -# This must repeat the value, because configure will remove `VPATH = .'. -srcdir = @srcdir@ - -CC = @CC@ - -CFLAGS = @CFLAGS@ -CPPFLAGS = @CPPFLAGS@ -LDFLAGS = @LDFLAGS@ - -# Define these for your system as follows: -# -DNO_ARCHIVES To disable `ar' archive support. -# -DNO_FLOAT To avoid using floating-point numbers. -# -DENUM_BITFIELDS If the compiler isn't GCC but groks enum foo:2. -# Some compilers apparently accept this -# without complaint but produce losing code, -# so beware. -# NeXT 1.0a uses an old version of GCC, which required -D__inline=inline. -# See also `config.h'. -defines = @DEFS@ -DLIBDIR=\"$(libdir)\" -DINCLUDEDIR=\"$(includedir)\" - -# Which flavor of remote job execution support to use. -# The code is found in `remote-$(REMOTE).c'. -REMOTE = @REMOTE@ - -# If your system doesn't have alloca, or the one provided is bad, define this. -ALLOCA = @ALLOCA@ -ALLOCA_SRC = $(srcdir)/alloca.c - -# If your system needs extra libraries loaded in, define them here. -# System V probably need -lPW for alloca. HP-UX 7.0's alloca in -# libPW.a is broken on HP9000s300 and HP9000s400 machines. Use -# alloca.c instead on those machines. -LOADLIBES = @LIBS@ - -# Any extra object files your system needs. -extras = @LIBOBJS@ - -# Common prefix for machine-independent installed files. -prefix = @prefix@ -# Common prefix for machine-dependent installed files. -exec_prefix = @exec_prefix@ - -# Directory to install `make' in. -bindir = $(exec_prefix)/bin -# Directory to find libraries in for `-lXXX'. -libdir = $(exec_prefix)/lib -# Directory to search by default for included makefiles. -includedir = $(prefix)/include -# Directory to install the Info files in. -infodir = $(prefix)/info -# Directory to install the man page in. -mandir = $(prefix)/man/man$(manext) -# Number to put on the man page filename. -manext = 1 -# Prefix to put on installed `make' binary file name. -binprefix = -# Prefix to put on installed `make' man page file name. -manprefix = $(binprefix) - -# Whether or not make needs to be installed setgid. -# The value should be either `true' or `false'. -# On many systems, the getloadavg function (used to implement the `-l' -# switch) will not work unless make is installed setgid kmem. -install_setgid = @NEED_SETGID@ -# Install make setgid to this group so it can read /dev/kmem. -group = @KMEM_GROUP@ - -# Program to install `make'. -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -# Program to install the man page. -INSTALL_DATA = @INSTALL_DATA@ -# Generic install program. -INSTALL = @INSTALL@ - -# Program to format Texinfo source into Info files. -MAKEINFO = makeinfo -# Program to format Texinfo source into DVI files. -TEXI2DVI = texi2dvi - -# Programs to make tags files. -ETAGS = etags -w -CTAGS = ctags -w - -GLOB = glob/libglob.a - -objs = commands.o job.o dir.o file.o misc.o main.o read.o remake.o \ - rule.o implicit.o default.o variable.o expand.o function.o \ - vpath.o version.o ar.o arscan.o signame.o remote-$(REMOTE).o \ - getopt.o getopt1.o \ - $(GLOB) $(ALLOCA) $(extras) -srcs = $(srcdir)/commands.c $(srcdir)/job.c $(srcdir)/dir.c \ - $(srcdir)/file.c $(srcdir)/getloadavg.c $(srcdir)/misc.c \ - $(srcdir)/main.c $(srcdir)/read.c $(srcdir)/remake.c \ - $(srcdir)/rule.c $(srcdir)/implicit.c $(srcdir)/default.c \ - $(srcdir)/variable.c $(srcdir)/expand.c $(srcdir)/function.c \ - $(srcdir)/vpath.c $(srcdir)/version.c \ - $(srcdir)/remote-$(REMOTE).c \ - $(srcdir)/ar.c $(srcdir)/arscan.c \ - $(srcdir)/signame.c $(srcdir)/signame.h \ - $(srcdir)/getopt.c $(srcdir)/getopt1.c $(srcdir)/getopt.h \ - $(srcdir)/commands.h $(srcdir)/dep.h $(srcdir)/filedef.h \ - $(srcdir)/job.h $(srcdir)/make.h $(srcdir)/rule.h \ - $(srcdir)/variable.h $(ALLOCA_SRC) $(srcdir)/config.h.in - - -.SUFFIXES: -.SUFFIXES: .o .c .h .ps .dvi .info .texinfo - -all: make -info: make.info -dvi: make.dvi -# Some makes apparently use .PHONY as the default goal if it is before `all'. -.PHONY: all check info dvi - -make.info: make.texinfo - $(MAKEINFO) -I$(srcdir) $(srcdir)/make.texinfo -o make.info - -make.dvi: make.texinfo - $(TEXI2DVI) $(srcdir)/make.texinfo - -make.ps: make.dvi - dvi2ps make.dvi > make.ps - -make: $(objs) - $(CC) $(LDFLAGS) $(objs) $(LOADLIBES) -o make.new - mv -f make.new make - -# -I. is needed to find config.h in the build directory. -.c.o: - $(CC) $(defines) -c -I. -I$(srcdir) -I$(srcdir)/glob \ - $(CPPFLAGS) $(CFLAGS) $< $(OUTPUT_OPTION) - -# For some losing Unix makes. -SHELL = /bin/sh -@SET_MAKE@ - -$(GLOB): FORCE config.h - cd glob; $(MAKE) libglob.a -FORCE: - -tagsrcs = $(srcs) $(srcdir)/remote-*.c -TAGS: $(tagsrcs) - $(ETAGS) $(tagsrcs) -tags: $(tagsrcs) - $(CTAGS) $(tagsrcs) - -.PHONY: install installdirs -install: installdirs \ - $(bindir)/$(binprefix)make $(infodir)/make.info \ - $(mandir)/$(manprefix)make.$(manext) - -installdirs: - $(SHELL) ${srcdir}/mkinstalldirs $(bindir) $(infodir) $(mandir) - -$(bindir)/$(binprefix)make: make - $(INSTALL_PROGRAM) make $@.new - @if $(install_setgid); then \ - if chgrp $(group) $@.new && chmod g+s $@.new; then \ - echo "chgrp $(group) $@.new && chmod g+s $@.new"; \ - else \ - echo "$@ needs to be owned by group $(group) and setgid;"; \ - echo "otherwise the \`-l' option will probably not work."; \ - echo "You may need special privileges to install $@."; \ - fi; \ - else true; fi -# Some systems can't deal with renaming onto a running binary. - -rm -f $@.old - -mv $@ $@.old - mv $@.new $@ - -$(infodir)/make.info: make.info - if [ -r ./make.info ]; then dir=.; else dir=$(srcdir); fi; \ - for file in $${dir}/make.info*; do \ - name="`basename $$file`"; \ - $(INSTALL_DATA) $$file \ - `echo $@ | sed "s,make.info\$$,$$name,"`; \ - done -# Run install-info only if it exists. -# Use `if' instead of just prepending `-' to the -# line so we notice real errors from install-info. -# We use `$(SHELL) -c' because some shells do not -# fail gracefully when there is an unknown command. - if $(SHELL) -c 'install-info --version' >/dev/null 2>&1; then \ - if [ -r ./make.info ]; then dir=.; else dir=$(srcdir); fi; \ - install-info --info-dir=$(infodir) $$dir/make.info; \ - else true; fi - -$(mandir)/$(manprefix)make.$(manext): make.man - $(INSTALL_DATA) $(srcdir)/make.man $@ - - -loadavg: loadavg.c config.h - $(CC) $(defines) -DTEST -I. -I$(srcdir) $(CFLAGS) $(LDFLAGS) \ - loadavg.c $(LOADLIBES) -o $@ -# We copy getloadavg.c into a different file rather than compiling it -# directly because some compilers clobber getloadavg.o in the process. -loadavg.c: getloadavg.c - ln $(srcdir)/getloadavg.c loadavg.c || \ - cp $(srcdir)/getloadavg.c loadavg.c -check-loadavg: loadavg - @echo The system uptime program believes the load average to be: - -uptime - @echo The GNU load average checking code believes: - ./loadavg -check: check-loadavg - - -.PHONY: clean realclean distclean mostlyclean -clean: glob-clean - -rm -f make loadavg *.o core make.dvi -distclean: clean glob-realclean - -rm -f Makefile config.h config.status build.sh stamp-config - -rm -f config.log config.cache - -rm -f TAGS tags - -rm -f make.?? make.??s make.log make.toc make.*aux - -rm -f loadavg.c -realclean: distclean - -rm -f make.info* -mostlyclean: clean - -.PHONY: glob-clean glob-realclean -glob-clean glob-realclean: - cd glob; $(MAKE) $@ - -Makefile: config.status $(srcdir)/Makefile.in - $(SHELL) config.status -glob/Makefile: config.status $(srcdir)/glob/Makefile.in - $(SHELL) config.status -config.h: stamp-config ; -stamp-config: config.status $(srcdir)/config.h.in - $(SHELL) config.status - touch stamp-config - -#configure: configure.in aclocal.m4 -# cd $(srcdir) && autoconf $(ACFLAGS) -#config.h.in: configure.in aclocal.m4 -# cd $(srcdir) && autoheader $(ACFLAGS) - -# This tells versions [3.59,3.63) of GNU make not to export all variables. -.NOEXPORT: - -# The automatically generated dependencies below may omit config.h -# because it is included with ``#include '' rather than -# ``#include "config.h"''. So we add the explicit dependency to make sure. -$(objs): config.h - -# Automatically generated dependencies will be put at the end of the file. - -# Automatically generated dependencies. -commands.o: commands.c make.h signame.h dep.h filedef.h variable.h \ - job.h commands.h -job.o: job.c make.h signame.h job.h filedef.h commands.h variable.h -dir.o: dir.c make.h signame.h -file.o: file.c make.h signame.h dep.h filedef.h job.h commands.h \ - variable.h -misc.o: misc.c make.h signame.h dep.h -main.o: main.c make.h signame.h dep.h filedef.h variable.h job.h \ - commands.h getopt.h -read.o: read.c make.h signame.h dep.h filedef.h job.h commands.h \ - variable.h glob/glob.h -remake.o: remake.c make.h signame.h filedef.h job.h commands.h dep.h -rule.o: rule.c make.h signame.h dep.h filedef.h job.h commands.h \ - variable.h rule.h -implicit.o: implicit.c make.h signame.h rule.h dep.h filedef.h -default.o: default.c make.h signame.h rule.h dep.h filedef.h job.h \ - commands.h variable.h -variable.o: variable.c make.h signame.h dep.h filedef.h job.h \ - commands.h variable.h -expand.o: expand.c make.h signame.h filedef.h job.h commands.h \ - variable.h -function.o: function.c make.h signame.h filedef.h variable.h dep.h \ - job.h commands.h -vpath.o: vpath.c make.h signame.h filedef.h variable.h -version.o: version.c -ar.o: ar.c make.h signame.h filedef.h dep.h -arscan.o: arscan.c make.h signame.h -signame.o: signame.c signame.h -remote-stub.o: remote-stub.c make.h signame.h filedef.h job.h \ - commands.h -getopt.o: getopt.c getopt.h -getopt1.o: getopt1.c getopt.h -getloadavg.o: getloadavg.c diff --git a/README b/README deleted file mode 100644 index ade2285..0000000 --- a/README +++ /dev/null @@ -1,37 +0,0 @@ -This directory contains the 3.75.1 test release of GNU Make. -All bugs reported for previous test releases have been fixed. -Some bugs surely remain. - -For general building and installation instructions, see the file INSTALL. -If you need to build GNU Make and have no other `make' program to use, -you can use the shell script `build.sh' instead. To do this, first run -`configure' as described in INSTALL. Then, instead of typing `make' to -build the program, type `sh build.sh'. This should compile the program -in the current directory. Then you will have a Make program that you can -use for `make install', or whatever else. - -Some systems' Make programs are broken and cannot process the Makefile for -GNU Make. If you get errors from your system's Make when building GNU -Make, try using `build.sh' instead. - -See README.W32 for details about GNU Make on Windows NT or 95. -See README.Amiga for details about GNU Make on AmigaDOS. -The MSDOS port of GNU Make is available as part of DJGPP; see the -WWW page http://www.delorie.com/djgpp/ for more information. - -It has been reported that the XLC 1.2 compiler on AIX 3.2 is buggy such -that if you compile make with `cc -O' on AIX 3.2, it will not work correctly. -It is said that using `cc' without `-O' does work. - -One area that is often a problem in configuration and porting is the code -to check the system's current load average. To make it easier to test and -debug this code, you can do `make check-loadavg' to see if it works -properly on your system. (You must run `configure' beforehand, but you -need not build Make itself to run this test.) - -See the file NEWS for what has changed since previous releases. - -GNU Make is fully documented in make.texinfo. See the section entitled -`Problems and Bugs' for information on submitting bug reports. - -GNU Make is free software. See the file COPYING for copying conditions. diff --git a/aclocal.m4 b/aclocal.m4 deleted file mode 100644 index d288743..0000000 --- a/aclocal.m4 +++ /dev/null @@ -1,19 +0,0 @@ -dnl -dnl Check for a symbol -dnl -AC_DEFUN(AC_CHECK_SYMBOL, [dnl -AC_MSG_CHECKING(for $1) -AC_CACHE_VAL(ac_cv_check_symbol_$1, [dnl -AC_TRY_LINK(, -changequote(,)dnl -extern char *$1[]; puts(*$1);, -changequote([,])dnl - ac_cv_check_symbol_$1=yes, ac_cv_check_symbol_$1=no)]) -if test "$ac_cv_check_symbol_$1" = yes; then -changequote(,)dnl - ac_tr_symbol=`echo $1 | tr '[a-z]' '[A-Z]'` -changequote([,])dnl - AC_DEFINE_UNQUOTED(HAVE_${ac_tr_symbol}) -fi -AC_MSG_RESULT($ac_cv_check_symbol_$1)])dnl -dnl diff --git a/build.sh.in b/build.sh.in deleted file mode 100644 index 1667f0e..0000000 --- a/build.sh.in +++ /dev/null @@ -1,69 +0,0 @@ -#!/bin/sh -# Shell script to build GNU Make in the absence of any `make' program. -# @configure_input@ - -# Copyright (C) 1993, 1994 Free Software Foundation, Inc. -# This file is part of GNU Make. -# -# GNU Make is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. -# -# GNU Make is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Make; see the file COPYING. If not, write to -# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - -# See Makefile.in for comments describing these variables. - -srcdir='@srcdir@' -CC='@CC@' -CFLAGS='@CFLAGS@' -CPPFLAGS='@CPPFLAGS@' -LDFLAGS='@LDFLAGS@' -defines='@DEFS@ -DLIBDIR="${libdir}" -DINCLUDEDIR="${includedir}"' -ALLOCA='@ALLOCA@' -LOADLIBES='@LIBS@' -extras='@LIBOBJS@' -REMOTE='@REMOTE@' - -# Common prefix for machine-independent installed files. -prefix='@prefix@' -# Common prefix for machine-dependent installed files. -exec_prefix='@exec_prefix@' -# Directory to find libraries in for `-lXXX'. -libdir=${exec_prefix}/lib -# Directory to search by default for included makefiles. -includedir=${prefix}/include - -# Exit as soon as any command fails. -set -e - -# These are all the objects we need to link together. -objs="commands.o job.o dir.o file.o misc.o main.o read.o remake.o rule.o implicit.o default.o variable.o expand.o function.o vpath.o version.o ar.o arscan.o signame.o getopt.o getopt1.o glob/glob.o glob/fnmatch.o remote-${REMOTE}.o ${extras} ${ALLOCA}" - -# Compile the source files into those objects. -for file in `echo ${objs} | sed 's/\.o/.c/g'`; do - echo compiling ${file}... - $CC $defines $CPPFLAGS $CFLAGS \ - -c -I. -I${srcdir} -I${srcdir}/glob ${srcdir}/$file -done - -# The object files were actually all put in the current directory. -# Remove the source directory names from the list. -srcobjs="$objs" -objs= -for obj in $srcobjs; do - objs="$objs `basename $obj`" -done - -# Link all the objects together. -echo linking make... -$CC $LDFLAGS $objs $LOADLIBES -o make.new -echo done -mv -f make.new make diff --git a/compatMakefile b/compatMakefile deleted file mode 100644 index 3ccfb6a..0000000 --- a/compatMakefile +++ /dev/null @@ -1,274 +0,0 @@ -# NOTE: If you have no `make' program at all to process this makefile, run -# `build.sh' instead. -# -# Copyright (C) 1988,89,91,92,93,94,95,96 Free Software Foundation, Inc. -# This file is part of GNU Make. -# -# GNU Make is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. -# -# GNU Make is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Make; see the file COPYING. If not, write to -# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - -# -# Makefile for GNU Make -# - -# Ultrix 2.2 make doesn't expand the value of VPATH. -VPATH = @srcdir@ -# This must repeat the value, because configure will remove `VPATH = .'. -srcdir = @srcdir@ - -CC = @CC@ - -CFLAGS = @CFLAGS@ -CPPFLAGS = @CPPFLAGS@ -LDFLAGS = @LDFLAGS@ - -# Define these for your system as follows: -# -DNO_ARCHIVES To disable `ar' archive support. -# -DNO_FLOAT To avoid using floating-point numbers. -# -DENUM_BITFIELDS If the compiler isn't GCC but groks enum foo:2. -# Some compilers apparently accept this -# without complaint but produce losing code, -# so beware. -# NeXT 1.0a uses an old version of GCC, which required -D__inline=inline. -# See also `config.h'. -defines = @DEFS@ -DLIBDIR=\"$(libdir)\" -DINCLUDEDIR=\"$(includedir)\" - -# Which flavor of remote job execution support to use. -# The code is found in `remote-$(REMOTE).c'. -REMOTE = @REMOTE@ - -# If your system doesn't have alloca, or the one provided is bad, define this. -ALLOCA = @ALLOCA@ -ALLOCA_SRC = $(srcdir)/alloca.c - -# If your system needs extra libraries loaded in, define them here. -# System V probably need -lPW for alloca. HP-UX 7.0's alloca in -# libPW.a is broken on HP9000s300 and HP9000s400 machines. Use -# alloca.c instead on those machines. -LOADLIBES = @LIBS@ - -# Any extra object files your system needs. -extras = @LIBOBJS@ - -# Common prefix for machine-independent installed files. -prefix = @prefix@ -# Common prefix for machine-dependent installed files. -exec_prefix = @exec_prefix@ - -# Directory to install `make' in. -bindir = $(exec_prefix)/bin -# Directory to find libraries in for `-lXXX'. -libdir = $(exec_prefix)/lib -# Directory to search by default for included makefiles. -includedir = $(prefix)/include -# Directory to install the Info files in. -infodir = $(prefix)/info -# Directory to install the man page in. -mandir = $(prefix)/man/man$(manext) -# Number to put on the man page filename. -manext = 1 -# Prefix to put on installed `make' binary file name. -binprefix = -# Prefix to put on installed `make' man page file name. -manprefix = $(binprefix) - -# Whether or not make needs to be installed setgid. -# The value should be either `true' or `false'. -# On many systems, the getloadavg function (used to implement the `-l' -# switch) will not work unless make is installed setgid kmem. -install_setgid = @NEED_SETGID@ -# Install make setgid to this group so it can read /dev/kmem. -group = @KMEM_GROUP@ - -# Program to install `make'. -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -# Program to install the man page. -INSTALL_DATA = @INSTALL_DATA@ -# Generic install program. -INSTALL = @INSTALL@ - -# Program to format Texinfo source into Info files. -MAKEINFO = makeinfo -# Program to format Texinfo source into DVI files. -TEXI2DVI = texi2dvi - -# Programs to make tags files. -ETAGS = etags -w -CTAGS = ctags -w - -GLOB = glob/libglob.a - -objs = commands.o job.o dir.o file.o misc.o main.o read.o remake.o \ - rule.o implicit.o default.o variable.o expand.o function.o \ - vpath.o version.o ar.o arscan.o signame.o remote-$(REMOTE).o \ - getopt.o getopt1.o \ - $(GLOB) $(ALLOCA) $(extras) -srcs = $(srcdir)/commands.c $(srcdir)/job.c $(srcdir)/dir.c \ - $(srcdir)/file.c $(srcdir)/getloadavg.c $(srcdir)/misc.c \ - $(srcdir)/main.c $(srcdir)/read.c $(srcdir)/remake.c \ - $(srcdir)/rule.c $(srcdir)/implicit.c $(srcdir)/default.c \ - $(srcdir)/variable.c $(srcdir)/expand.c $(srcdir)/function.c \ - $(srcdir)/vpath.c $(srcdir)/version.c \ - $(srcdir)/remote-$(REMOTE).c \ - $(srcdir)/ar.c $(srcdir)/arscan.c \ - $(srcdir)/signame.c $(srcdir)/signame.h \ - $(srcdir)/getopt.c $(srcdir)/getopt1.c $(srcdir)/getopt.h \ - $(srcdir)/commands.h $(srcdir)/dep.h $(srcdir)/filedef.h \ - $(srcdir)/job.h $(srcdir)/make.h $(srcdir)/rule.h \ - $(srcdir)/variable.h $(ALLOCA_SRC) $(srcdir)/config.h.in - - -.SUFFIXES: -.SUFFIXES: .o .c .h .ps .dvi .info .texinfo - -all: make -info: make.info -dvi: make.dvi -# Some makes apparently use .PHONY as the default goal if it is before `all'. -.PHONY: all check info dvi - -make.info: make.texinfo - $(MAKEINFO) -I$(srcdir) $(srcdir)/make.texinfo -o make.info - -make.dvi: make.texinfo - $(TEXI2DVI) $(srcdir)/make.texinfo - -make.ps: make.dvi - dvi2ps make.dvi > make.ps - -make: $(objs) - $(CC) $(LDFLAGS) $(objs) $(LOADLIBES) -o make.new - mv -f make.new make - -# -I. is needed to find config.h in the build directory. -.c.o: - $(CC) $(defines) -c -I. -I$(srcdir) -I$(srcdir)/glob \ - $(CPPFLAGS) $(CFLAGS) $< $(OUTPUT_OPTION) - -# For some losing Unix makes. -SHELL = /bin/sh -MAKE = make - -$(GLOB): FORCE config.h - cd glob; $(MAKE) libglob.a -FORCE: - -tagsrcs = $(srcs) $(srcdir)/remote-*.c -TAGS: $(tagsrcs) - $(ETAGS) $(tagsrcs) -tags: $(tagsrcs) - $(CTAGS) $(tagsrcs) - -.PHONY: install installdirs -install: installdirs \ - $(bindir)/$(binprefix)make $(infodir)/make.info \ - $(mandir)/$(manprefix)make.$(manext) - -installdirs: - $(SHELL) ${srcdir}/mkinstalldirs $(bindir) $(infodir) $(mandir) - -$(bindir)/$(binprefix)make: make - $(INSTALL_PROGRAM) make $@.new - @if $(install_setgid); then \ - if chgrp $(group) $@.new && chmod g+s $@.new; then \ - echo "chgrp $(group) $@.new && chmod g+s $@.new"; \ - else \ - echo "$@ needs to be owned by group $(group) and setgid;"; \ - echo "otherwise the \`-l' option will probably not work."; \ - echo "You may need special privileges to install $@."; \ - fi; \ - else true; fi -# Some systems can't deal with renaming onto a running binary. - -rm -f $@.old - -mv $@ $@.old - mv $@.new $@ - -$(infodir)/make.info: make.info - if [ -r ./make.info ]; then dir=.; else dir=$(srcdir); fi; \ - for file in $${dir}/make.info*; do \ - name="`basename $$file`"; \ - $(INSTALL_DATA) $$file \ - `echo $@ | sed "s,make.info\$$,$$name,"`; \ - done -# Run install-info only if it exists. -# Use `if' instead of just prepending `-' to the -# line so we notice real errors from install-info. -# We use `$(SHELL) -c' because some shells do not -# fail gracefully when there is an unknown command. - if $(SHELL) -c 'install-info --version' >/dev/null 2>&1; then \ - if [ -r ./make.info ]; then dir=.; else dir=$(srcdir); fi; \ - install-info --info-dir=$(infodir) $$dir/make.info; \ - else true; fi - -$(mandir)/$(manprefix)make.$(manext): make.man - $(INSTALL_DATA) $(srcdir)/make.man $@ - - -loadavg: loadavg.c config.h - $(CC) $(defines) -DTEST -I. -I$(srcdir) $(CFLAGS) $(LDFLAGS) \ - loadavg.c $(LOADLIBES) -o $@ -# We copy getloadavg.c into a different file rather than compiling it -# directly because some compilers clobber getloadavg.o in the process. -loadavg.c: getloadavg.c - ln $(srcdir)/getloadavg.c loadavg.c || \ - cp $(srcdir)/getloadavg.c loadavg.c -check-loadavg: loadavg - @echo The system uptime program believes the load average to be: - -uptime - @echo The GNU load average checking code believes: - ./loadavg -check: check-loadavg - - -.PHONY: clean realclean distclean mostlyclean -clean: glob-clean - -rm -f make loadavg *.o core make.dvi -distclean: clean glob-realclean - -rm -f Makefile config.h config.status build.sh stamp-config - -rm -f config.log config.cache - -rm -f TAGS tags - -rm -f make.?? make.??s make.log make.toc make.*aux - -rm -f loadavg.c -realclean: distclean - -rm -f make.info* -mostlyclean: clean - -.PHONY: glob-clean glob-realclean -glob-clean glob-realclean: - cd glob; $(MAKE) $@ - -Makefile: config.status $(srcdir)/Makefile.in - $(SHELL) config.status -glob/Makefile: config.status $(srcdir)/glob/Makefile.in - $(SHELL) config.status -config.h: stamp-config ; -stamp-config: config.status $(srcdir)/config.h.in - $(SHELL) config.status - touch stamp-config - -#configure: configure.in aclocal.m4 -# cd $(srcdir) && autoconf $(ACFLAGS) -#config.h.in: configure.in aclocal.m4 -# cd $(srcdir) && autoheader $(ACFLAGS) - -# This tells versions [3.59,3.63) of GNU make not to export all variables. -.NOEXPORT: - -# The automatically generated dependencies below may omit config.h -# because it is included with ``#include '' rather than -# ``#include "config.h"''. So we add the explicit dependency to make sure. -$(objs): config.h - -# Automatically generated dependencies will be put at the end of the file. - diff --git a/config.h.in b/config.h.in deleted file mode 100644 index 6c535d7..0000000 --- a/config.h.in +++ /dev/null @@ -1,276 +0,0 @@ -/* config.h.in. Generated automatically from configure.in by autoheader. */ - -/* Define if on AIX 3. - System headers sometimes define this. - We just want to avoid a redefinition error message. */ -#ifndef _ALL_SOURCE -#undef _ALL_SOURCE -#endif - -/* Define if using alloca.c. */ -#undef C_ALLOCA - -/* Define to empty if the keyword does not work. */ -#undef const - -/* Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems. - This function is required for alloca.c support on those systems. */ -#undef CRAY_STACKSEG_END - -/* Define for DGUX with . */ -#undef DGUX - -/* Define if the `getloadavg' function needs to be run setuid or setgid. */ -#undef GETLOADAVG_PRIVILEGED - -/* Define to `int' if doesn't define. */ -#undef gid_t - -/* Define if you have alloca, as a function or macro. */ -#undef HAVE_ALLOCA - -/* Define if you have and it should be used (not on Ultrix). */ -#undef HAVE_ALLOCA_H - -/* Define if you don't have vprintf but do have _doprnt. */ -#undef HAVE_DOPRNT - -/* Define if your system has a working fnmatch function. */ -#undef HAVE_FNMATCH - -/* Define if your system has its own `getloadavg' function. */ -#undef HAVE_GETLOADAVG - -/* Define if you have the getmntent function. */ -#undef HAVE_GETMNTENT - -/* Define if the `long double' type works. */ -#undef HAVE_LONG_DOUBLE - -/* Define if you support file names longer than 14 characters. */ -#undef HAVE_LONG_FILE_NAMES - -/* Define if you have a working `mmap' system call. */ -#undef HAVE_MMAP - -/* Define if system calls automatically restart after interruption - by a signal. */ -#undef HAVE_RESTARTABLE_SYSCALLS - -/* Define if your struct stat has st_blksize. */ -#undef HAVE_ST_BLKSIZE - -/* Define if your struct stat has st_blocks. */ -#undef HAVE_ST_BLOCKS - -/* Define if you have the strcoll function and it is properly defined. */ -#undef HAVE_STRCOLL - -/* Define if your struct stat has st_rdev. */ -#undef HAVE_ST_RDEV - -/* Define if you have the strftime function. */ -#undef HAVE_STRFTIME - -/* Define if you have that is POSIX.1 compatible. */ -#undef HAVE_SYS_WAIT_H - -/* Define if your struct tm has tm_zone. */ -#undef HAVE_TM_ZONE - -/* Define if you don't have tm_zone but do have the external array - tzname. */ -#undef HAVE_TZNAME - -/* Define if you have . */ -#undef HAVE_UNISTD_H - -/* Define if utime(file, NULL) sets file's timestamp to the present. */ -#undef HAVE_UTIME_NULL - -/* Define if you have . */ -#undef HAVE_VFORK_H - -/* Define if you have the vprintf function. */ -#undef HAVE_VPRINTF - -/* Define if you have the wait3 system call. */ -#undef HAVE_WAIT3 - -/* Define if on MINIX. */ -#undef _MINIX - -/* Define if your struct nlist has an n_un member. */ -#undef NLIST_NAME_UNION - -/* Define if you have . */ -#undef NLIST_STRUCT - -/* Define if your C compiler doesn't accept -c and -o together. */ -#undef NO_MINUS_C_MINUS_O - -/* Define to `int' if doesn't define. */ -#undef pid_t - -/* Define if the system does not provide POSIX.1 features except - with this defined. */ -#undef _POSIX_1_SOURCE - -/* Define if you need to in order for stat and other things to work. */ -#undef _POSIX_SOURCE - -/* Define as the return type of signal handlers (int or void). */ -#undef RETSIGTYPE - -/* Define if the setvbuf function takes the buffering type as its second - argument and the buffer pointer as the third, as on System V - before release 3. */ -#undef SETVBUF_REVERSED - -/* If using the C implementation of alloca, define if you know the - direction of stack growth for your system; otherwise it will be - automatically deduced at run-time. - STACK_DIRECTION > 0 => grows toward higher addresses - STACK_DIRECTION < 0 => grows toward lower addresses - STACK_DIRECTION = 0 => direction of growth unknown - */ -#undef STACK_DIRECTION - -/* Define if the `S_IS*' macros in do not work properly. */ -#undef STAT_MACROS_BROKEN - -/* Define if you have the ANSI C header files. */ -#undef STDC_HEADERS - -/* Define on System V Release 4. */ -#undef SVR4 - -/* Define if `sys_siglist' is declared by . */ -#undef SYS_SIGLIST_DECLARED - -/* Define to `int' if doesn't define. */ -#undef uid_t - -/* Define for Encore UMAX. */ -#undef UMAX - -/* Define for Encore UMAX 4.3 that has - instead of . */ -#undef UMAX4_3 - -/* Define vfork as fork if vfork does not work. */ -#undef vfork - -/* Define to the name of the SCCS `get' command. */ -#undef SCCS_GET - -/* Define this if the SCCS `get' command understands the `-G' option. */ -#undef SCCS_GET_MINUS_G - -/* Define this if the C library defines the variable `sys_siglist'. */ -#undef HAVE_SYS_SIGLIST - -/* Define this if the C library defines the variable `_sys_siglist'. */ -#undef HAVE__SYS_SIGLIST - -/* Define this if you have the `union wait' type in . */ -#undef HAVE_UNION_WAIT - -/* Define if you have the dup2 function. */ -#undef HAVE_DUP2 - -/* Define if you have the getcwd function. */ -#undef HAVE_GETCWD - -/* Define if you have the getgroups function. */ -#undef HAVE_GETGROUPS - -/* Define if you have the getloadavg function. */ -#undef HAVE_GETLOADAVG - -/* Define if you have the memmove function. */ -#undef HAVE_MEMMOVE - -/* Define if you have the mktemp function. */ -#undef HAVE_MKTEMP - -/* Define if you have the psignal function. */ -#undef HAVE_PSIGNAL - -/* Define if you have the setegid function. */ -#undef HAVE_SETEGID - -/* Define if you have the seteuid function. */ -#undef HAVE_SETEUID - -/* Define if you have the setlinebuf function. */ -#undef HAVE_SETLINEBUF - -/* Define if you have the setregid function. */ -#undef HAVE_SETREGID - -/* Define if you have the setreuid function. */ -#undef HAVE_SETREUID - -/* Define if you have the sigsetmask function. */ -#undef HAVE_SIGSETMASK - -/* Define if you have the strerror function. */ -#undef HAVE_STRERROR - -/* Define if you have the strsignal function. */ -#undef HAVE_STRSIGNAL - -/* Define if you have the wait3 function. */ -#undef HAVE_WAIT3 - -/* Define if you have the waitpid function. */ -#undef HAVE_WAITPID - -/* Define if you have the header file. */ -#undef HAVE_DIRENT_H - -/* Define if you have the header file. */ -#undef HAVE_FCNTL_H - -/* Define if you have the header file. */ -#undef HAVE_LIMITS_H - -/* Define if you have the header file. */ -#undef HAVE_MACH_MACH_H - -/* Define if you have the header file. */ -#undef HAVE_MEMORY_H - -/* Define if you have the header file. */ -#undef HAVE_NDIR_H - -/* Define if you have the header file. */ -#undef HAVE_STRING_H - -/* Define if you have the header file. */ -#undef HAVE_SYS_DIR_H - -/* Define if you have the header file. */ -#undef HAVE_SYS_NDIR_H - -/* Define if you have the header file. */ -#undef HAVE_SYS_PARAM_H - -/* Define if you have the header file. */ -#undef HAVE_SYS_TIMEB_H - -/* Define if you have the header file. */ -#undef HAVE_SYS_WAIT_H - -/* Define if you have the header file. */ -#undef HAVE_UNISTD_H - -/* Define if you have the dgc library (-ldgc). */ -#undef HAVE_LIBDGC - -/* Define if you have the kstat library (-lkstat). */ -#undef HAVE_LIBKSTAT - -/* Define if you have the sun library (-lsun). */ -#undef HAVE_LIBSUN diff --git a/configure b/configure deleted file mode 100755 index 8564609..0000000 --- a/configure +++ /dev/null @@ -1,3501 +0,0 @@ -#! /bin/sh - -# From configure.in Id: configure.in,v 1.54 1997/04/07 18:02:17 psmith Exp -# Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.12 -# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. -# -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. - -# Defaults: -ac_help= -ac_default_prefix=/usr/local -# Any additions from configure.in: -ac_help="$ac_help -export jobs with the Customs daemon (NOT SUPPORTED)" - -# Initialize some variables set by options. -# The variables have the same names as the options, with -# dashes changed to underlines. -build=NONE -cache_file=./config.cache -exec_prefix=NONE -host=NONE -no_create= -nonopt=NONE -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -target=NONE -verbose= -x_includes=NONE -x_libraries=NONE -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datadir='${prefix}/share' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -libdir='${exec_prefix}/lib' -includedir='${prefix}/include' -oldincludedir='/usr/include' -infodir='${prefix}/info' -mandir='${prefix}/man' - -# Initialize some other variables. -subdirs= -MFLAGS= MAKEFLAGS= -# Maximum number of lines to put in a shell here document. -ac_max_here_lines=12 - -ac_prev= -for ac_option -do - - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval "$ac_prev=\$ac_option" - ac_prev= - continue - fi - - case "$ac_option" in - -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; - *) ac_optarg= ;; - esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case "$ac_option" in - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir="$ac_optarg" ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build="$ac_optarg" ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file="$ac_optarg" ;; - - -datadir | --datadir | --datadi | --datad | --data | --dat | --da) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ - | --da=*) - datadir="$ac_optarg" ;; - - -disable-* | --disable-*) - ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then - { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } - fi - ac_feature=`echo $ac_feature| sed 's/-/_/g'` - eval "enable_${ac_feature}=no" ;; - - -enable-* | --enable-*) - ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then - { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } - fi - ac_feature=`echo $ac_feature| sed 's/-/_/g'` - case "$ac_option" in - *=*) ;; - *) ac_optarg=yes ;; - esac - eval "enable_${ac_feature}='$ac_optarg'" ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix="$ac_optarg" ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he) - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat << EOF -Usage: configure [options] [host] -Options: [defaults in brackets after descriptions] -Configuration: - --cache-file=FILE cache test results in FILE - --help print this message - --no-create do not create output files - --quiet, --silent do not print \`checking...' messages - --version print the version of autoconf that created configure -Directory and file names: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [same as prefix] - --bindir=DIR user executables in DIR [EPREFIX/bin] - --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] - --libexecdir=DIR program executables in DIR [EPREFIX/libexec] - --datadir=DIR read-only architecture-independent data in DIR - [PREFIX/share] - --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data in DIR - [PREFIX/com] - --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] - --libdir=DIR object code libraries in DIR [EPREFIX/lib] - --includedir=DIR C header files in DIR [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] - --infodir=DIR info documentation in DIR [PREFIX/info] - --mandir=DIR man documentation in DIR [PREFIX/man] - --srcdir=DIR find the sources in DIR [configure dir or ..] - --program-prefix=PREFIX prepend PREFIX to installed program names - --program-suffix=SUFFIX append SUFFIX to installed program names - --program-transform-name=PROGRAM - run sed PROGRAM on installed program names -EOF - cat << EOF -Host type: - --build=BUILD configure for building on BUILD [BUILD=HOST] - --host=HOST configure for HOST [guessed] - --target=TARGET configure for TARGET [TARGET=HOST] -Features and packages: - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --x-includes=DIR X include files are in DIR - --x-libraries=DIR X library files are in DIR -EOF - if test -n "$ac_help"; then - echo "--enable and --with options recognized:$ac_help" - fi - exit 0 ;; - - -host | --host | --hos | --ho) - ac_prev=host ;; - -host=* | --host=* | --hos=* | --ho=*) - host="$ac_optarg" ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir="$ac_optarg" ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir="$ac_optarg" ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir="$ac_optarg" ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir="$ac_optarg" ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst \ - | --locals | --local | --loca | --loc | --lo) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* \ - | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) - localstatedir="$ac_optarg" ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir="$ac_optarg" ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir="$ac_optarg" ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix="$ac_optarg" ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix="$ac_optarg" ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix="$ac_optarg" ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name="$ac_optarg" ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir="$ac_optarg" ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir="$ac_optarg" ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site="$ac_optarg" ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir="$ac_optarg" ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir="$ac_optarg" ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target="$ac_optarg" ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.12" - exit 0 ;; - - -with-* | --with-*) - ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then - { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } - fi - ac_package=`echo $ac_package| sed 's/-/_/g'` - case "$ac_option" in - *=*) ;; - *) ac_optarg=yes ;; - esac - eval "with_${ac_package}='$ac_optarg'" ;; - - -without-* | --without-*) - ac_package=`echo $ac_option|sed -e 's/-*without-//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then - { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } - fi - ac_package=`echo $ac_package| sed 's/-/_/g'` - eval "with_${ac_package}=no" ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes="$ac_optarg" ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries="$ac_optarg" ;; - - -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } - ;; - - *) - if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then - echo "configure: warning: $ac_option: invalid host type" 1>&2 - fi - if test "x$nonopt" != xNONE; then - { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } - fi - nonopt="$ac_option" - ;; - - esac -done - -if test -n "$ac_prev"; then - { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } -fi - -trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 - -# File descriptor usage: -# 0 standard input -# 1 file creation -# 2 errors and warnings -# 3 some systems may open it to /dev/tty -# 4 used on the Kubota Titan -# 6 checking for... messages and results -# 5 compiler messages saved in config.log -if test "$silent" = yes; then - exec 6>/dev/null -else - exec 6>&1 -fi -exec 5>./config.log - -echo "\ -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. -" 1>&5 - -# Strip out --no-create and --no-recursion so they do not pile up. -# Also quote any args containing shell metacharacters. -ac_configure_args= -for ac_arg -do - case "$ac_arg" in - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c) ;; - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) - ac_configure_args="$ac_configure_args '$ac_arg'" ;; - *) ac_configure_args="$ac_configure_args $ac_arg" ;; - esac -done - -# NLS nuisances. -# Only set these to C if already set. These must not be set unconditionally -# because not all systems understand e.g. LANG=C (notably SCO). -# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! -# Non-C LC_CTYPE values break the ctype check. -if test "${LANG+set}" = set; then LANG=C; export LANG; fi -if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi -if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi -if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -rf conftest* confdefs.h -# AIX cpp loses on an empty file, so make sure it contains at least a newline. -echo > confdefs.h - -# A filename unique to this package, relative to the directory that -# configure is in, which we can look for to find out if srcdir is correct. -ac_unique_file=vpath.c - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then its parent. - ac_prog=$0 - ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` - test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. - srcdir=$ac_confdir - if test ! -r $srcdir/$ac_unique_file; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r $srcdir/$ac_unique_file; then - if test "$ac_srcdir_defaulted" = yes; then - { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } - else - { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } - fi -fi -srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` - -# Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" - fi -fi -for ac_site_file in $CONFIG_SITE; do - if test -r "$ac_site_file"; then - echo "loading site script $ac_site_file" - . "$ac_site_file" - fi -done - -if test -r "$cache_file"; then - echo "loading cache $cache_file" - . $cache_file -else - echo "creating cache $cache_file" - > $cache_file -fi - -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then - # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. - if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then - ac_n= ac_c=' -' ac_t=' ' - else - ac_n=-n ac_c= ac_t= - fi -else - ac_n= ac_c='\c' ac_t= -fi - - -ac_aux_dir= -for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do - if test -f $ac_dir/install-sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f $ac_dir/install.sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - fi -done -if test -z "$ac_aux_dir"; then - { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; } -fi -ac_config_guess=$ac_aux_dir/config.guess -ac_config_sub=$ac_aux_dir/config.sub -ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. - -subdirs="glob" - -echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:547: checking whether ${MAKE-make} sets \${MAKE}" >&5 -set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftestmake <<\EOF -all: - @echo 'ac_maketemp="${MAKE}"' -EOF -# GNU make sometimes prints "make[1]: Entering...", which would confuse us. -eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` -if test -n "$ac_maketemp"; then - eval ac_cv_prog_make_${ac_make}_set=yes -else - eval ac_cv_prog_make_${ac_make}_set=no -fi -rm -f conftestmake -fi -if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then - echo "$ac_t""yes" 1>&6 - SET_MAKE= -else - echo "$ac_t""no" 1>&6 - SET_MAKE="MAKE=${MAKE-make}" -fi - -# Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:576: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CC="gcc" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:605: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - ac_prog_rejected=no - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - break - fi - done - IFS="$ac_save_ifs" -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# -gt 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - set dummy "$ac_dir/$ac_word" "$@" - shift - ac_cv_prog_CC="$@" - fi -fi -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } -fi - -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:653: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 - -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - ac_cv_prog_cc_works=yes - # If we can't run a trivial program, we are probably using a cross compiler. - if (./conftest; exit) 2>/dev/null; then - ac_cv_prog_cc_cross=no - else - ac_cv_prog_cc_cross=yes - fi -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_cv_prog_cc_works=no -fi -rm -fr conftest* - -echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 -if test $ac_cv_prog_cc_works = no; then - { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } -fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:687: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 -echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 -cross_compiling=$ac_cv_prog_cc_cross - -echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:692: checking whether we are using GNU C" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then - ac_cv_prog_gcc=yes -else - ac_cv_prog_gcc=no -fi -fi - -echo "$ac_t""$ac_cv_prog_gcc" 1>&6 - -if test $ac_cv_prog_gcc = yes; then - GCC=yes - ac_test_CFLAGS="${CFLAGS+set}" - ac_save_CFLAGS="$CFLAGS" - CFLAGS= - echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:716: checking whether ${CC-cc} accepts -g" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - echo 'void f(){}' > conftest.c -if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then - ac_cv_prog_cc_g=yes -else - ac_cv_prog_cc_g=no -fi -rm -f conftest* - -fi - -echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 - if test "$ac_test_CFLAGS" = set; then - CFLAGS="$ac_save_CFLAGS" - elif test $ac_cv_prog_cc_g = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-O2" - fi -else - GCC= - test "${CFLAGS+set}" = set || CFLAGS="-g" -fi - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# ./install, which can be erroneously created by make from ./install.sh. -echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:754: checking for a BSD compatible install" >&5 -if test -z "$INSTALL"; then -if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - # Account for people who put trailing slashes in PATH elements. - case "$ac_dir/" in - /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - for ac_prog in ginstall installbsd scoinst install; do - if test -f $ac_dir/$ac_prog; then - if test $ac_prog = install && - grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - # OSF/1 installbsd also uses dspmsg, but is usable. - : - else - ac_cv_path_install="$ac_dir/$ac_prog -c" - break 2 - fi - fi - done - ;; - esac - done - IFS="$ac_save_IFS" - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL="$ac_cv_path_install" - else - # As a last resort, use the slow shell script. We don't cache a - # path for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the path is relative. - INSTALL="$ac_install_sh" - fi -fi -echo "$ac_t""$INSTALL" 1>&6 - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - -echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:804: checking how to run the C preprocessor" >&5 -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then -if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - # This must be in double quotes, not single quotes, because CPP may get - # substituted into the Makefile and "${CC-cc}" will confuse make. - CPP="${CC-cc} -E" - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. - cat > conftest.$ac_ext < -Syntax Error -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:825: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - : -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - CPP="${CC-cc} -E -traditional-cpp" - cat > conftest.$ac_ext < -Syntax Error -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:842: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - : -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - CPP=/lib/cpp -fi -rm -f conftest* -fi -rm -f conftest* - ac_cv_prog_CPP="$CPP" -fi - CPP="$ac_cv_prog_CPP" -else - ac_cv_prog_CPP="$CPP" -fi -echo "$ac_t""$CPP" 1>&6 - echo $ac_n "checking for AIX""... $ac_c" 1>&6 -echo "configure:864: checking for AIX" >&5 -cat > conftest.$ac_ext <&5 | - egrep "yes" >/dev/null 2>&1; then - rm -rf conftest* - echo "$ac_t""yes" 1>&6; cat >> confdefs.h <<\EOF -#define _ALL_SOURCE 1 -EOF - -else - rm -rf conftest* - echo "$ac_t""no" 1>&6 -fi -rm -f conftest* - - -echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 -echo "configure:888: checking for POSIXized ISC" >&5 -if test -d /etc/conf/kconfig.d && - grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 -then - echo "$ac_t""yes" 1>&6 - ISC=yes # If later tests want to check for ISC. - cat >> confdefs.h <<\EOF -#define _POSIX_SOURCE 1 -EOF - - if test "$GCC" = yes; then - CC="$CC -posix" - else - CC="$CC -Xp" - fi -else - echo "$ac_t""no" 1>&6 - ISC= -fi - -ac_safe=`echo "minix/config.h" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for minix/config.h""... $ac_c" 1>&6 -echo "configure:910: checking for minix/config.h" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:920: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" -fi -rm -f conftest* -fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - MINIX=yes -else - echo "$ac_t""no" 1>&6 -MINIX= -fi - -if test "$MINIX" = yes; then - cat >> confdefs.h <<\EOF -#define _POSIX_SOURCE 1 -EOF - - cat >> confdefs.h <<\EOF -#define _POSIX_1_SOURCE 2 -EOF - - cat >> confdefs.h <<\EOF -#define _MINIX 1 -EOF - -fi - -echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:958: checking for ANSI C header files" >&5 -if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -#include -#include -#include -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:971: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - rm -rf conftest* - ac_cv_header_stdc=yes -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_header_stdc=no -fi -rm -f conftest* - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. -cat > conftest.$ac_ext < -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "memchr" >/dev/null 2>&1; then - : -else - rm -rf conftest* - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. -cat > conftest.$ac_ext < -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "free" >/dev/null 2>&1; then - : -else - rm -rf conftest* - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. -if test "$cross_compiling" = yes; then - : -else - cat > conftest.$ac_ext < -#define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int main () { int i; for (i = 0; i < 256; i++) -if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); -exit (0); } - -EOF -if { (eval echo configure:1038: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null -then - : -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -fr conftest* - ac_cv_header_stdc=no -fi -rm -fr conftest* -fi - -fi -fi - -echo "$ac_t""$ac_cv_header_stdc" 1>&6 -if test $ac_cv_header_stdc = yes; then - cat >> confdefs.h <<\EOF -#define STDC_HEADERS 1 -EOF - -fi - -ac_header_dirent=no -for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h -do -ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6 -echo "configure:1066: checking for $ac_hdr that defines DIR" >&5 -if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -#include <$ac_hdr> -int main() { -DIR *dirp = 0; -; return 0; } -EOF -if { (eval echo configure:1079: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - eval "ac_cv_header_dirent_$ac_safe=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_dirent_$ac_safe=no" -fi -rm -f conftest* -fi -if eval "test \"`echo '$ac_cv_header_dirent_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` - cat >> confdefs.h <&6 -fi -done -# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix. -if test $ac_header_dirent = dirent.h; then -echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6 -echo "configure:1104: checking for opendir in -ldir" >&5 -ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-ldir $LIBS" -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - LIBS="$LIBS -ldir" -else - echo "$ac_t""no" 1>&6 -fi - -else -echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6 -echo "configure:1145: checking for opendir in -lx" >&5 -ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-lx $LIBS" -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - LIBS="$LIBS -lx" -else - echo "$ac_t""no" 1>&6 -fi - -fi - -echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6 -echo "configure:1187: checking for uid_t in sys/types.h" >&5 -if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "uid_t" >/dev/null 2>&1; then - rm -rf conftest* - ac_cv_type_uid_t=yes -else - rm -rf conftest* - ac_cv_type_uid_t=no -fi -rm -f conftest* - -fi - -echo "$ac_t""$ac_cv_type_uid_t" 1>&6 -if test $ac_cv_type_uid_t = no; then - cat >> confdefs.h <<\EOF -#define uid_t int -EOF - - cat >> confdefs.h <<\EOF -#define gid_t int -EOF - -fi - echo $ac_n "checking for pid_t""... $ac_c" 1>&6 -echo "configure:1220: checking for pid_t" >&5 -if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -#if STDC_HEADERS -#include -#include -#endif -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "pid_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then - rm -rf conftest* - ac_cv_type_pid_t=yes -else - rm -rf conftest* - ac_cv_type_pid_t=no -fi -rm -f conftest* - -fi -echo "$ac_t""$ac_cv_type_pid_t" 1>&6 -if test $ac_cv_type_pid_t = no; then - cat >> confdefs.h <<\EOF -#define pid_t int -EOF - -fi - -echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 -echo "configure:1253: checking return type of signal handlers" >&5 -if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -#include -#ifdef signal -#undef signal -#endif -#ifdef __cplusplus -extern "C" void (*signal (int, void (*)(int)))(int); -#else -void (*signal ()) (); -#endif - -int main() { -int i; -; return 0; } -EOF -if { (eval echo configure:1275: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_type_signal=void -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_type_signal=int -fi -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_type_signal" 1>&6 -cat >> confdefs.h <&6 -echo "configure:1298: checking for $ac_hdr" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1308: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" -fi -rm -f conftest* -fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` - cat >> confdefs.h <&6 -fi -done - -if test "x$CC" != xcc; then - echo $ac_n "checking whether $CC and cc understand -c and -o together""... $ac_c" 1>&6 -echo "configure:1336: checking whether $CC and cc understand -c and -o together" >&5 -else - echo $ac_n "checking whether cc understands -c and -o together""... $ac_c" 1>&6 -echo "configure:1339: checking whether cc understands -c and -o together" >&5 -fi -set dummy $CC; ac_cc="`echo $2 | - sed -e 's/[^a-zA-Z0-9_]/_/g' -e 's/^[0-9]/_/'`" -if eval "test \"`echo '$''{'ac_cv_prog_cc_${ac_cc}_c_o'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - echo 'foo(){}' > conftest.c -# Make sure it works both with $CC and with simple cc. -# We do the test twice because some compilers refuse to overwrite an -# existing .o file with -o, though they will create one. -ac_try='${CC-cc} -c conftest.c -o conftest.o 1>&5' -if { (eval echo configure:1351: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } && - test -f conftest.o && { (eval echo configure:1352: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; -then - eval ac_cv_prog_cc_${ac_cc}_c_o=yes - if test "x$CC" != xcc; then - # Test first that cc exists at all. - if { ac_try='cc -c conftest.c 1>&5'; { (eval echo configure:1357: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then - ac_try='cc -c conftest.c -o conftest.o 1>&5' - if { (eval echo configure:1359: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } && - test -f conftest.o && { (eval echo configure:1360: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; - then - # cc works too. - : - else - # cc exists but doesn't like -o. - eval ac_cv_prog_cc_${ac_cc}_c_o=no - fi - fi - fi -else - eval ac_cv_prog_cc_${ac_cc}_c_o=no -fi -rm -f conftest* - -fi -if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" = yes"; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 - cat >> confdefs.h <<\EOF -#define NO_MINUS_C_MINUS_O 1 -EOF - -fi - -echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:1387: checking for working const" >&5 -if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <j = 5; -} -{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ - const int foo = 10; -} - -; return 0; } -EOF -if { (eval echo configure:1441: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_c_const=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_c_const=no -fi -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_c_const" 1>&6 -if test $ac_cv_c_const = no; then - cat >> confdefs.h <<\EOF -#define const -EOF - -fi - echo $ac_n "checking whether stat file-mode macros are broken""... $ac_c" 1>&6 -echo "configure:1461: checking whether stat file-mode macros are broken" >&5 -if eval "test \"`echo '$''{'ac_cv_header_stat_broken'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -#include - -#if defined(S_ISBLK) && defined(S_IFDIR) -# if S_ISBLK (S_IFDIR) -You lose. -# endif -#endif - -#if defined(S_ISBLK) && defined(S_IFCHR) -# if S_ISBLK (S_IFCHR) -You lose. -# endif -#endif - -#if defined(S_ISLNK) && defined(S_IFREG) -# if S_ISLNK (S_IFREG) -You lose. -# endif -#endif - -#if defined(S_ISSOCK) && defined(S_IFREG) -# if S_ISSOCK (S_IFREG) -You lose. -# endif -#endif - -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "You lose" >/dev/null 2>&1; then - rm -rf conftest* - ac_cv_header_stat_broken=yes -else - rm -rf conftest* - ac_cv_header_stat_broken=no -fi -rm -f conftest* - -fi - -echo "$ac_t""$ac_cv_header_stat_broken" 1>&6 -if test $ac_cv_header_stat_broken = yes; then - cat >> confdefs.h <<\EOF -#define STAT_MACROS_BROKEN 1 -EOF - -fi - - - - - -for ac_func in memmove psignal mktemp \ - dup2 getcwd sigsetmask getgroups setlinebuf \ - seteuid setegid setreuid setregid strerror strsignal -do -echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1525: checking for $ac_func" >&5 -if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -/* Override any gcc2 internal prototype to avoid an error. */ -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char $ac_func(); - -int main() { - -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_$ac_func) || defined (__stub___$ac_func) -choke me -#else -$ac_func(); -#endif - -; return 0; } -EOF -if { (eval echo configure:1553: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - eval "ac_cv_func_$ac_func=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_func_$ac_func=no" -fi -rm -f conftest* -fi - -if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` - cat >> confdefs.h <&6 -fi -done - -echo $ac_n "checking for sys_siglist""... $ac_c" 1>&6 -echo "configure:1578: checking for sys_siglist" >&5 -if eval "test \"`echo '$''{'ac_cv_check_symbol_sys_siglist'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - ac_cv_check_symbol_sys_siglist=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_check_symbol_sys_siglist=no -fi -rm -f conftest* -fi - -if test "$ac_cv_check_symbol_sys_siglist" = yes; then - ac_tr_symbol=`echo sys_siglist | tr '[a-z]' '[A-Z]'` - cat >> confdefs.h <&6 -# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works -# for constant arguments. Useless! -echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:1613: checking for working alloca.h" >&5 -if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -int main() { -char *p = alloca(2 * sizeof(int)); -; return 0; } -EOF -if { (eval echo configure:1625: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - ac_cv_header_alloca_h=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_header_alloca_h=no -fi -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_header_alloca_h" 1>&6 -if test $ac_cv_header_alloca_h = yes; then - cat >> confdefs.h <<\EOF -#define HAVE_ALLOCA_H 1 -EOF - -fi - -echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:1646: checking for alloca" >&5 -if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -# else -# ifdef _AIX - #pragma alloca -# else -# ifndef alloca /* predefined by HP cc +Olibcalls */ -char *alloca (); -# endif -# endif -# endif -#endif - -int main() { -char *p = (char *) alloca(1); -; return 0; } -EOF -if { (eval echo configure:1674: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - ac_cv_func_alloca_works=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_func_alloca_works=no -fi -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_func_alloca_works" 1>&6 -if test $ac_cv_func_alloca_works = yes; then - cat >> confdefs.h <<\EOF -#define HAVE_ALLOCA 1 -EOF - -fi - -if test $ac_cv_func_alloca_works = no; then - # The SVR3 libPW and SVR4 libucb both contain incompatible functions - # that cause trouble. Some versions do not even contain alloca or - # contain a buggy version. If you still want to use their alloca, - # use ar to extract alloca.o from them instead of compiling alloca.c. - ALLOCA=alloca.o - cat >> confdefs.h <<\EOF -#define C_ALLOCA 1 -EOF - - -echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:1706: checking whether alloca needs Cray hooks" >&5 -if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <&5 | - egrep "webecray" >/dev/null 2>&1; then - rm -rf conftest* - ac_cv_os_cray=yes -else - rm -rf conftest* - ac_cv_os_cray=no -fi -rm -f conftest* - -fi - -echo "$ac_t""$ac_cv_os_cray" 1>&6 -if test $ac_cv_os_cray = yes; then -for ac_func in _getb67 GETB67 getb67; do - echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1736: checking for $ac_func" >&5 -if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -/* Override any gcc2 internal prototype to avoid an error. */ -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char $ac_func(); - -int main() { - -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_$ac_func) || defined (__stub___$ac_func) -choke me -#else -$ac_func(); -#endif - -; return 0; } -EOF -if { (eval echo configure:1764: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - eval "ac_cv_func_$ac_func=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_func_$ac_func=no" -fi -rm -f conftest* -fi - -if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then - echo "$ac_t""yes" 1>&6 - cat >> confdefs.h <&6 -fi - -done -fi - -echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:1791: checking stack direction for C alloca" >&5 -if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test "$cross_compiling" = yes; then - ac_cv_c_stack_direction=0 -else - cat > conftest.$ac_ext < addr) ? 1 : -1; -} -main () -{ - exit (find_stack_direction() < 0); -} -EOF -if { (eval echo configure:1818: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null -then - ac_cv_c_stack_direction=1 -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -fr conftest* - ac_cv_c_stack_direction=-1 -fi -rm -fr conftest* -fi - -fi - -echo "$ac_t""$ac_cv_c_stack_direction" 1>&6 -cat >> confdefs.h <&6 -echo "configure:1841: checking for vfork.h" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1851: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" -fi -rm -f conftest* -fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - cat >> confdefs.h <<\EOF -#define HAVE_VFORK_H 1 -EOF - -else - echo "$ac_t""no" 1>&6 -fi - -echo $ac_n "checking for working vfork""... $ac_c" 1>&6 -echo "configure:1876: checking for working vfork" >&5 -if eval "test \"`echo '$''{'ac_cv_func_vfork_works'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test "$cross_compiling" = yes; then - echo $ac_n "checking for vfork""... $ac_c" 1>&6 -echo "configure:1882: checking for vfork" >&5 -if eval "test \"`echo '$''{'ac_cv_func_vfork'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -/* Override any gcc2 internal prototype to avoid an error. */ -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char vfork(); - -int main() { - -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_vfork) || defined (__stub___vfork) -choke me -#else -vfork(); -#endif - -; return 0; } -EOF -if { (eval echo configure:1910: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - eval "ac_cv_func_vfork=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_func_vfork=no" -fi -rm -f conftest* -fi - -if eval "test \"`echo '$ac_cv_func_'vfork`\" = yes"; then - echo "$ac_t""yes" 1>&6 - : -else - echo "$ac_t""no" 1>&6 -fi - -else - cat > conftest.$ac_ext < -#include -#include -#ifdef HAVE_UNISTD_H -#include -#endif -#ifdef HAVE_VFORK_H -#include -#endif -/* On some sparc systems, changes by the child to local and incoming - argument registers are propagated back to the parent. - The compiler is told about this with #include , - but some compilers (e.g. gcc -O) don't grok . - Test for this by using a static variable whose address - is put into a register that is clobbered by the vfork. */ -static -#ifdef __cplusplus -sparc_address_test (int arg) -#else -sparc_address_test (arg) int arg; -#endif -{ - static pid_t child; - if (!child) { - child = vfork (); - if (child < 0) { - perror ("vfork"); - _exit(2); - } - if (!child) { - arg = getpid(); - write(-1, "", 0); - _exit (arg); - } - } -} -main() { - pid_t parent = getpid (); - pid_t child; - - sparc_address_test (); - - child = vfork (); - - if (child == 0) { - /* Here is another test for sparc vfork register problems. - This test uses lots of local variables, at least - as many local variables as main has allocated so far - including compiler temporaries. 4 locals are enough for - gcc 1.40.3 on a Solaris 4.1.3 sparc, but we use 8 to be safe. - A buggy compiler should reuse the register of parent - for one of the local variables, since it will think that - parent can't possibly be used any more in this routine. - Assigning to the local variable will thus munge parent - in the parent process. */ - pid_t - p = getpid(), p1 = getpid(), p2 = getpid(), p3 = getpid(), - p4 = getpid(), p5 = getpid(), p6 = getpid(), p7 = getpid(); - /* Convince the compiler that p..p7 are live; otherwise, it might - use the same hardware register for all 8 local variables. */ - if (p != p1 || p != p2 || p != p3 || p != p4 - || p != p5 || p != p6 || p != p7) - _exit(1); - - /* On some systems (e.g. IRIX 3.3), - vfork doesn't separate parent from child file descriptors. - If the child closes a descriptor before it execs or exits, - this munges the parent's descriptor as well. - Test for this by closing stdout in the child. */ - _exit(close(fileno(stdout)) != 0); - } else { - int status; - struct stat st; - - while (wait(&status) != child) - ; - exit( - /* Was there some problem with vforking? */ - child < 0 - - /* Did the child fail? (This shouldn't happen.) */ - || status - - /* Did the vfork/compiler bug occur? */ - || parent != getpid() - - /* Did the file descriptor bug occur? */ - || fstat(fileno(stdout), &st) != 0 - ); - } -} -EOF -if { (eval echo configure:2026: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null -then - ac_cv_func_vfork_works=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -fr conftest* - ac_cv_func_vfork_works=no -fi -rm -fr conftest* -fi - -fi - -echo "$ac_t""$ac_cv_func_vfork_works" 1>&6 -if test $ac_cv_func_vfork_works = no; then - cat >> confdefs.h <<\EOF -#define vfork fork -EOF - -fi - -echo $ac_n "checking whether setvbuf arguments are reversed""... $ac_c" 1>&6 -echo "configure:2049: checking whether setvbuf arguments are reversed" >&5 -if eval "test \"`echo '$''{'ac_cv_func_setvbuf_reversed'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test "$cross_compiling" = yes; then - { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } -else - cat > conftest.$ac_ext < -/* If setvbuf has the reversed format, exit 0. */ -main () { - /* This call has the arguments reversed. - A reversed system may check and see that the address of main - is not _IOLBF, _IONBF, or _IOFBF, and return nonzero. */ - if (setvbuf(stdout, _IOLBF, (char *) main, BUFSIZ) != 0) - exit(1); - putc('\r', stdout); - exit(0); /* Non-reversed systems segv here. */ -} -EOF -if { (eval echo configure:2071: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null -then - ac_cv_func_setvbuf_reversed=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -fr conftest* - ac_cv_func_setvbuf_reversed=no -fi -rm -fr conftest* -fi - -rm -f core core.* *.core -fi - -echo "$ac_t""$ac_cv_func_setvbuf_reversed" 1>&6 -if test $ac_cv_func_setvbuf_reversed = yes; then - cat >> confdefs.h <<\EOF -#define SETVBUF_REVERSED 1 -EOF - -fi - -ac_have_func=no # yes means we've found a way to get the load average. - -# Some systems with -lutil have (and need) -lkvm as well, some do not. -# On Solaris, -lkvm requires nlist from -lelf, so check that first -# to get the right answer into the cache. -echo $ac_n "checking for elf_begin in -lelf""... $ac_c" 1>&6 -echo "configure:2100: checking for elf_begin in -lelf" >&5 -ac_lib_var=`echo elf'_'elf_begin | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-lelf $LIBS" -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - LIBS="-lelf $LIBS" -else - echo "$ac_t""no" 1>&6 -fi - -echo $ac_n "checking for kvm_open in -lkvm""... $ac_c" 1>&6 -echo "configure:2140: checking for kvm_open in -lkvm" >&5 -ac_lib_var=`echo kvm'_'kvm_open | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-lkvm $LIBS" -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - LIBS="-lkvm $LIBS" -else - echo "$ac_t""no" 1>&6 -fi - -# Check for the 4.4BSD definition of getloadavg. -echo $ac_n "checking for getloadavg in -lutil""... $ac_c" 1>&6 -echo "configure:2181: checking for getloadavg in -lutil" >&5 -ac_lib_var=`echo util'_'getloadavg | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-lutil $LIBS" -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - LIBS="-lutil $LIBS" ac_have_func=yes ac_cv_func_getloadavg_setgid=yes -else - echo "$ac_t""no" 1>&6 -fi - - -if test $ac_have_func = no; then - # There is a commonly available library for RS/6000 AIX. - # Since it is not a standard part of AIX, it might be installed locally. - ac_getloadavg_LIBS="$LIBS" LIBS="-L/usr/local/lib $LIBS" - echo $ac_n "checking for getloadavg in -lgetloadavg""... $ac_c" 1>&6 -echo "configure:2226: checking for getloadavg in -lgetloadavg" >&5 -ac_lib_var=`echo getloadavg'_'getloadavg | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-lgetloadavg $LIBS" -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - LIBS="-lgetloadavg $LIBS" -else - echo "$ac_t""no" 1>&6 -LIBS="$ac_getloadavg_LIBS" -fi - -fi - -# Make sure it is really in the library, if we think we found it. -for ac_func in getloadavg -do -echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2272: checking for $ac_func" >&5 -if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -/* Override any gcc2 internal prototype to avoid an error. */ -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char $ac_func(); - -int main() { - -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_$ac_func) || defined (__stub___$ac_func) -choke me -#else -$ac_func(); -#endif - -; return 0; } -EOF -if { (eval echo configure:2300: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - eval "ac_cv_func_$ac_func=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_func_$ac_func=no" -fi -rm -f conftest* -fi - -if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` - cat >> confdefs.h <&6 -LIBOBJS="$LIBOBJS ${ac_func}.o" -fi -done - - - -if test $ac_cv_func_getloadavg = yes; then - cat >> confdefs.h <<\EOF -#define HAVE_GETLOADAVG 1 -EOF - - ac_have_func=yes -else - # Figure out what our getloadavg.c needs. - ac_have_func=no - ac_safe=`echo "sys/dg_sys_info.h" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for sys/dg_sys_info.h""... $ac_c" 1>&6 -echo "configure:2338: checking for sys/dg_sys_info.h" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2348: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" -fi -rm -f conftest* -fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_have_func=yes; cat >> confdefs.h <<\EOF -#define DGUX 1 -EOF - - echo $ac_n "checking for dg_sys_info in -ldgc""... $ac_c" 1>&6 -echo "configure:2369: checking for dg_sys_info in -ldgc" >&5 -ac_lib_var=`echo dgc'_'dg_sys_info | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-ldgc $LIBS" -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_lib=HAVE_LIB`echo dgc | sed -e 's/[^a-zA-Z0-9_]/_/g' \ - -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` - cat >> confdefs.h <&6 -fi - -else - echo "$ac_t""no" 1>&6 -fi - - - # We cannot check for , because Solaris 2 does not use dwarf (it - # uses stabs), but it is still SVR4. We cannot check for because - # Irix 4.0.5F has the header but not the library. - if test $ac_have_func = no && test $ac_cv_lib_elf_elf_begin = yes; then - ac_have_func=yes; cat >> confdefs.h <<\EOF -#define SVR4 1 -EOF - - fi - - if test $ac_have_func = no; then - ac_safe=`echo "inq_stats/cpustats.h" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for inq_stats/cpustats.h""... $ac_c" 1>&6 -echo "configure:2433: checking for inq_stats/cpustats.h" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2443: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" -fi -rm -f conftest* -fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_have_func=yes; cat >> confdefs.h <<\EOF -#define UMAX 1 -EOF - - cat >> confdefs.h <<\EOF -#define UMAX4_3 1 -EOF - -else - echo "$ac_t""no" 1>&6 -fi - - fi - - if test $ac_have_func = no; then - ac_safe=`echo "sys/cpustats.h" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for sys/cpustats.h""... $ac_c" 1>&6 -echo "configure:2476: checking for sys/cpustats.h" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2486: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" -fi -rm -f conftest* -fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_have_func=yes; cat >> confdefs.h <<\EOF -#define UMAX 1 -EOF - -else - echo "$ac_t""no" 1>&6 -fi - - fi - - if test $ac_have_func = no; then - for ac_hdr in mach/mach.h -do -ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2517: checking for $ac_hdr" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2527: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" -fi -rm -f conftest* -fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` - cat >> confdefs.h <&6 -fi -done - - fi - - ac_safe=`echo "nlist.h" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for nlist.h""... $ac_c" 1>&6 -echo "configure:2557: checking for nlist.h" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2567: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" -fi -rm -f conftest* -fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - cat >> confdefs.h <<\EOF -#define NLIST_STRUCT 1 -EOF - - echo $ac_n "checking for n_un in struct nlist""... $ac_c" 1>&6 -echo "configure:2588: checking for n_un in struct nlist" >&5 -if eval "test \"`echo '$''{'ac_cv_struct_nlist_n_un'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -int main() { -struct nlist n; n.n_un.n_name = 0; -; return 0; } -EOF -if { (eval echo configure:2600: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_struct_nlist_n_un=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_struct_nlist_n_un=no -fi -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_struct_nlist_n_un" 1>&6 - if test $ac_cv_struct_nlist_n_un = yes; then - cat >> confdefs.h <<\EOF -#define NLIST_NAME_UNION 1 -EOF - - fi - -else - echo "$ac_t""no" 1>&6 -fi -fi # Do not have getloadavg in system libraries. - -# Some definitions of getloadavg require that the program be installed setgid. -echo $ac_n "checking whether getloadavg requires setgid""... $ac_c" 1>&6 -echo "configure:2627: checking whether getloadavg requires setgid" >&5 -if eval "test \"`echo '$''{'ac_cv_func_getloadavg_setgid'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <&5 | - egrep "Yowza Am I SETGID yet" >/dev/null 2>&1; then - rm -rf conftest* - ac_cv_func_getloadavg_setgid=yes -else - rm -rf conftest* - ac_cv_func_getloadavg_setgid=no -fi -rm -f conftest* - -fi - -echo "$ac_t""$ac_cv_func_getloadavg_setgid" 1>&6 -if test $ac_cv_func_getloadavg_setgid = yes; then - NEED_SETGID=true; cat >> confdefs.h <<\EOF -#define GETLOADAVG_PRIVILEGED 1 -EOF - -else - NEED_SETGID=false -fi - -if test $ac_cv_func_getloadavg_setgid = yes; then - echo $ac_n "checking group of /dev/kmem""... $ac_c" 1>&6 -echo "configure:2663: checking group of /dev/kmem" >&5 -if eval "test \"`echo '$''{'ac_cv_group_kmem'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - # On Solaris, /dev/kmem is a symlink. Get info on the real file. - ac_ls_output=`ls -lgL /dev/kmem 2>/dev/null` - # If we got an error (system does not support symlinks), try without -L. - test -z "$ac_ls_output" && ac_ls_output=`ls -lg /dev/kmem` - ac_cv_group_kmem=`echo $ac_ls_output \ - | sed -ne 's/[ ][ ]*/ /g; - s/^.[sSrwx-]* *[0-9]* *\([^0-9]*\) *.*/\1/; - / /s/.* //;p;'` - -fi - -echo "$ac_t""$ac_cv_group_kmem" 1>&6 - KMEM_GROUP=$ac_cv_group_kmem -fi - -echo $ac_n "checking for kstat_open in -lkstat""... $ac_c" 1>&6 -echo "configure:2683: checking for kstat_open in -lkstat" >&5 -ac_lib_var=`echo kstat'_'kstat_open | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-lkstat $LIBS" -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_lib=HAVE_LIB`echo kstat | sed -e 's/[^a-zA-Z0-9_]/_/g' \ - -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` - cat >> confdefs.h <&6 -fi - -echo $ac_n "checking for working strcoll""... $ac_c" 1>&6 -echo "configure:2730: checking for working strcoll" >&5 -if eval "test \"`echo '$''{'ac_cv_func_strcoll_works'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test "$cross_compiling" = yes; then - ac_cv_func_strcoll_works=no -else - cat > conftest.$ac_ext < -main () -{ - exit (strcoll ("abc", "def") >= 0 || - strcoll ("ABC", "DEF") >= 0 || - strcoll ("123", "456") >= 0); -} -EOF -if { (eval echo configure:2748: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null -then - ac_cv_func_strcoll_works=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -fr conftest* - ac_cv_func_strcoll_works=no -fi -rm -fr conftest* -fi - -fi - -echo "$ac_t""$ac_cv_func_strcoll_works" 1>&6 -if test $ac_cv_func_strcoll_works = yes; then - cat >> confdefs.h <<\EOF -#define HAVE_STRCOLL 1 -EOF - -fi - - -# Check out the wait reality. -for ac_hdr in sys/wait.h -do -ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2776: checking for $ac_hdr" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2786: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" -fi -rm -f conftest* -fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` - cat >> confdefs.h <&6 -fi -done - for ac_func in waitpid wait3 -do -echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2814: checking for $ac_func" >&5 -if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -/* Override any gcc2 internal prototype to avoid an error. */ -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char $ac_func(); - -int main() { - -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_$ac_func) || defined (__stub___$ac_func) -choke me -#else -$ac_func(); -#endif - -; return 0; } -EOF -if { (eval echo configure:2842: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - eval "ac_cv_func_$ac_func=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_func_$ac_func=no" -fi -rm -f conftest* -fi - -if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` - cat >> confdefs.h <&6 -fi -done - -echo $ac_n "checking for union wait""... $ac_c" 1>&6 -echo "configure:2867: checking for union wait" >&5 -if eval "test \"`echo '$''{'make_cv_union_wait'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -#include -int main() { -union wait status; int pid; pid = wait (&status); -#ifdef WEXITSTATUS -/* Some POSIXoid systems have both the new-style macros and the old - union wait type, and they do not work together. If union wait - conflicts with WEXITSTATUS et al, we don't want to use it at all. */ -if (WEXITSTATUS (status) != 0) pid = -1; -#ifdef WTERMSIG -/* If we have WEXITSTATUS and WTERMSIG, just use them on ints. */ --- blow chunks here -- -#endif -#endif -#ifdef HAVE_WAITPID -/* Make sure union wait works with waitpid. */ -pid = waitpid (-1, &status, 0); -#endif - -; return 0; } -EOF -if { (eval echo configure:2895: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - make_cv_union_wait=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - make_cv_union_wait=no -fi -rm -f conftest* -fi - -if test "$make_cv_union_wait" = yes; then - cat >> confdefs.h <<\EOF -#define HAVE_UNION_WAIT 1 -EOF - -fi -echo "$ac_t""$make_cv_union_wait" 1>&6 - -echo $ac_n "checking for sys_siglist declaration in signal.h or unistd.h""... $ac_c" 1>&6 -echo "configure:2916: checking for sys_siglist declaration in signal.h or unistd.h" >&5 -if eval "test \"`echo '$''{'ac_cv_decl_sys_siglist'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -#include -/* NetBSD declares sys_siglist in unistd.h. */ -#ifdef HAVE_UNISTD_H -#include -#endif -int main() { -char *msg = *(sys_siglist + 1); -; return 0; } -EOF -if { (eval echo configure:2933: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_decl_sys_siglist=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_decl_sys_siglist=no -fi -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_decl_sys_siglist" 1>&6 -if test $ac_cv_decl_sys_siglist = yes; then - cat >> confdefs.h <<\EOF -#define SYS_SIGLIST_DECLARED 1 -EOF - -fi - - -# The presence of the following is not meant to imply -# that make necessarily works on those systems. -echo $ac_n "checking for getpwnam in -lsun""... $ac_c" 1>&6 -echo "configure:2957: checking for getpwnam in -lsun" >&5 -ac_lib_var=`echo sun'_'getpwnam | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-lsun $LIBS" -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_lib=HAVE_LIB`echo sun | sed -e 's/[^a-zA-Z0-9_]/_/g' \ - -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` - cat >> confdefs.h <&6 -fi - - - REMOTE=stub -# Check whether --with-customs or --without-customs was given. -if test "${with_customs+set}" = set; then - withval="$with_customs" - REMOTE=cstms LIBS="$LIBS libcustoms.a" -fi - - -echo checking for location of SCCS get command -if test -f /usr/sccs/get; then - SCCS_GET=/usr/sccs/get - cat >> confdefs.h <<\EOF -#define SCCS_GET "/usr/sccs/get" -EOF - -else - SCCS_GET=get - cat >> confdefs.h <<\EOF -#define SCCS_GET "get" -EOF - -fi -ac_clean_files="$ac_clean_files s.conftest conftoast" # Remove these later. -if ( /usr/sccs/admin -n s.conftest || admin -n s.conftest ) >/dev/null 2>&1 && - test -f s.conftest; then - # We successfully created an SCCS file. - echo checking if SCCS get command understands -G - if $SCCS_GET -Gconftoast s.conftest >/dev/null 2>&1 && - test -f conftoast; then - cat >> confdefs.h <<\EOF -#define SCCS_GET_MINUS_G 1 -EOF - - fi -fi -rm -f s.conftest conftoast - -trap '' 1 2 15 -cat > confcache <<\EOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs. It is not useful on other systems. -# If it contains results you don't want to keep, you may remove or edit it. -# -# By default, configure uses ./config.cache as the cache file, -# creating it if it does not exist already. You can give configure -# the --cache-file=FILE option to use a different cache file; that is -# what configure does when it calls configure scripts in -# subdirectories, so they share the cache. -# Giving --cache-file=/dev/null disables caching, for debugging configure. -# config.status only pays attention to the cache file if you give it the -# --recheck option to rerun configure. -# -EOF -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -(set) 2>&1 | - case `(ac_space=' '; set) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote substitution - # turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - -e "s/'/'\\\\''/g" \ - -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' - ;; - esac >> confcache -if cmp -s $cache_file confcache; then - : -else - if test -w $cache_file; then - echo "updating cache $cache_file" - cat confcache > $cache_file - else - echo "not updating unwritable cache $cache_file" - fi -fi -rm -f confcache - -trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -# Any assignment to VPATH causes Sun make to only execute -# the first set of double-colon rules, so remove it if not needed. -# If there is a colon in the path, we need to keep it. -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' -fi - -trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 - -DEFS=-DHAVE_CONFIG_H - -# Without the "./", some shells look in PATH for config.status. -: ${CONFIG_STATUS=./config.status} - -echo creating $CONFIG_STATUS -rm -f $CONFIG_STATUS -cat > $CONFIG_STATUS </dev/null | sed 1q`: -# -# $0 $ac_configure_args -# -# Compiler output produced by configure, useful for debugging -# configure, is in ./config.log if it exists. - -ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" -for ac_option -do - case "\$ac_option" in - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" - exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; - -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.12" - exit 0 ;; - -help | --help | --hel | --he | --h) - echo "\$ac_cs_usage"; exit 0 ;; - *) echo "\$ac_cs_usage"; exit 1 ;; - esac -done - -ac_given_srcdir=$srcdir -ac_given_INSTALL="$INSTALL" - -trap 'rm -fr `echo "Makefile build.sh config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 -EOF -cat >> $CONFIG_STATUS < conftest.subs <<\\CEOF -$ac_vpsub -$extrasub -s%@CFLAGS@%$CFLAGS%g -s%@CPPFLAGS@%$CPPFLAGS%g -s%@CXXFLAGS@%$CXXFLAGS%g -s%@DEFS@%$DEFS%g -s%@LDFLAGS@%$LDFLAGS%g -s%@LIBS@%$LIBS%g -s%@exec_prefix@%$exec_prefix%g -s%@prefix@%$prefix%g -s%@program_transform_name@%$program_transform_name%g -s%@bindir@%$bindir%g -s%@sbindir@%$sbindir%g -s%@libexecdir@%$libexecdir%g -s%@datadir@%$datadir%g -s%@sysconfdir@%$sysconfdir%g -s%@sharedstatedir@%$sharedstatedir%g -s%@localstatedir@%$localstatedir%g -s%@libdir@%$libdir%g -s%@includedir@%$includedir%g -s%@oldincludedir@%$oldincludedir%g -s%@infodir@%$infodir%g -s%@mandir@%$mandir%g -s%@subdirs@%$subdirs%g -s%@SET_MAKE@%$SET_MAKE%g -s%@CC@%$CC%g -s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g -s%@INSTALL_DATA@%$INSTALL_DATA%g -s%@CPP@%$CPP%g -s%@LIBOBJS@%$LIBOBJS%g -s%@ALLOCA@%$ALLOCA%g -s%@NEED_SETGID@%$NEED_SETGID%g -s%@KMEM_GROUP@%$KMEM_GROUP%g -s%@REMOTE@%$REMOTE%g - -CEOF -EOF - -cat >> $CONFIG_STATUS <<\EOF - -# Split the substitutions into bite-sized pieces for seds with -# small command number limits, like on Digital OSF/1 and HP-UX. -ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. -ac_file=1 # Number of current file. -ac_beg=1 # First line for current file. -ac_end=$ac_max_sed_cmds # Line after last line for current file. -ac_more_lines=: -ac_sed_cmds="" -while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file - else - sed "${ac_end}q" conftest.subs > conftest.s$ac_file - fi - if test ! -s conftest.s$ac_file; then - ac_more_lines=false - rm -f conftest.s$ac_file - else - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f conftest.s$ac_file" - else - ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" - fi - ac_file=`expr $ac_file + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_cmds` - fi -done -if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat -fi -EOF - -cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF -for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` - ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; - *) ac_file_in="${ac_file}.in" ;; - esac - - # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. - - # Remove last slash and all that follows it. Not all systems have dirname. - ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` - if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then - # The file is in a subdirectory. - test ! -d "$ac_dir" && mkdir "$ac_dir" - ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" - # A "../" for each directory in $ac_dir_suffix. - ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` - else - ac_dir_suffix= ac_dots= - fi - - case "$ac_given_srcdir" in - .) srcdir=. - if test -z "$ac_dots"; then top_srcdir=. - else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; - /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; - *) # Relative path. - srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" - top_srcdir="$ac_dots$ac_given_srcdir" ;; - esac - - case "$ac_given_INSTALL" in - [/$]*) INSTALL="$ac_given_INSTALL" ;; - *) INSTALL="$ac_dots$ac_given_INSTALL" ;; - esac - - echo creating "$ac_file" - rm -f "$ac_file" - configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." - case "$ac_file" in - *Makefile*) ac_comsub="1i\\ -# $configure_input" ;; - *) ac_comsub= ;; - esac - - ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` - sed -e "$ac_comsub -s%@configure_input@%$configure_input%g -s%@srcdir@%$srcdir%g -s%@top_srcdir@%$top_srcdir%g -s%@INSTALL@%$INSTALL%g -" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file -fi; done -rm -f conftest.s* - -# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where -# NAME is the cpp macro being defined and VALUE is the value it is being given. -# -# ac_d sets the value in "#define NAME VALUE" lines. -ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)' -ac_dB='\([ ][ ]*\)[^ ]*%\1#\2' -ac_dC='\3' -ac_dD='%g' -# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE". -ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' -ac_uB='\([ ]\)%\1#\2define\3' -ac_uC=' ' -ac_uD='\4%g' -# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE". -ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' -ac_eB='$%\1#\2define\3' -ac_eC=' ' -ac_eD='%g' - -if test "${CONFIG_HEADERS+set}" != set; then -EOF -cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF -fi -for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` - ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; - *) ac_file_in="${ac_file}.in" ;; - esac - - echo creating $ac_file - - rm -f conftest.frag conftest.in conftest.out - ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` - cat $ac_file_inputs > conftest.in - -EOF - -# Transform confdefs.h into a sed script conftest.vals that substitutes -# the proper values into config.h.in to produce config.h. And first: -# Protect against being on the right side of a sed subst in config.status. -# Protect against being in an unquoted here document in config.status. -rm -f conftest.vals -cat > conftest.hdr <<\EOF -s/[\\&%]/\\&/g -s%[\\$`]%\\&%g -s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp -s%ac_d%ac_u%gp -s%ac_u%ac_e%gp -EOF -sed -n -f conftest.hdr confdefs.h > conftest.vals -rm -f conftest.hdr - -# This sed command replaces #undef with comments. This is necessary, for -# example, in the case of _POSIX_SOURCE, which is predefined and required -# on some systems where configure will not decide to define it. -cat >> conftest.vals <<\EOF -s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */% -EOF - -# Break up conftest.vals because some shells have a limit on -# the size of here documents, and old seds have small limits too. - -rm -f conftest.tail -while : -do - ac_lines=`grep -c . conftest.vals` - # grep -c gives empty output for an empty file on some AIX systems. - if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi - # Write a limited-size here document to conftest.frag. - echo ' cat > conftest.frag <> $CONFIG_STATUS - sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS - echo 'CEOF - sed -f conftest.frag conftest.in > conftest.out - rm -f conftest.in - mv conftest.out conftest.in -' >> $CONFIG_STATUS - sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail - rm -f conftest.vals - mv conftest.tail conftest.vals -done -rm -f conftest.vals - -cat >> $CONFIG_STATUS <<\EOF - rm -f conftest.frag conftest.h - echo "/* $ac_file. Generated automatically by configure. */" > conftest.h - cat conftest.in >> conftest.h - rm -f conftest.in - if cmp -s $ac_file conftest.h 2>/dev/null; then - echo "$ac_file is unchanged" - rm -f conftest.h - else - # Remove last slash and all that follows it. Not all systems have dirname. - ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` - if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then - # The file is in a subdirectory. - test ! -d "$ac_dir" && mkdir "$ac_dir" - fi - rm -f $ac_file - mv conftest.h $ac_file - fi -fi; done - -EOF -cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF - -# Makefile uses this timestamp file to know when to remake Makefile, -# build.sh, and glob/Makefile. -touch stamp-config -exit 0 -EOF -chmod +x $CONFIG_STATUS -rm -fr confdefs* $ac_clean_files -test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 - -if test "$no_recursion" != yes; then - - # Remove --cache-file and --srcdir arguments so they do not pile up. - ac_sub_configure_args= - ac_prev= - for ac_arg in $ac_configure_args; do - if test -n "$ac_prev"; then - ac_prev= - continue - fi - case "$ac_arg" in - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - ;; - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - ;; - *) ac_sub_configure_args="$ac_sub_configure_args $ac_arg" ;; - esac - done - - for ac_config_dir in glob; do - - # Do not complain, so a configure script can configure whichever - # parts of a large source tree are present. - if test ! -d $srcdir/$ac_config_dir; then - continue - fi - - echo configuring in $ac_config_dir - - case "$srcdir" in - .) ;; - *) - if test -d ./$ac_config_dir || mkdir ./$ac_config_dir; then :; - else - { echo "configure: error: can not create `pwd`/$ac_config_dir" 1>&2; exit 1; } - fi - ;; - esac - - ac_popdir=`pwd` - cd $ac_config_dir - - # A "../" for each directory in /$ac_config_dir. - ac_dots=`echo $ac_config_dir|sed -e 's%^\./%%' -e 's%[^/]$%&/%' -e 's%[^/]*/%../%g'` - - case "$srcdir" in - .) # No --srcdir option. We are building in place. - ac_sub_srcdir=$srcdir ;; - /*) # Absolute path. - ac_sub_srcdir=$srcdir/$ac_config_dir ;; - *) # Relative path. - ac_sub_srcdir=$ac_dots$srcdir/$ac_config_dir ;; - esac - - # Check for guested configure; otherwise get Cygnus style configure. - if test -f $ac_sub_srcdir/configure; then - ac_sub_configure=$ac_sub_srcdir/configure - elif test -f $ac_sub_srcdir/configure.in; then - ac_sub_configure=$ac_configure - else - echo "configure: warning: no configuration information is in $ac_config_dir" 1>&2 - ac_sub_configure= - fi - - # The recursion is here. - if test -n "$ac_sub_configure"; then - - # Make the cache file name correct relative to the subdirectory. - case "$cache_file" in - /*) ac_sub_cache_file=$cache_file ;; - *) # Relative path. - ac_sub_cache_file="$ac_dots$cache_file" ;; - esac - case "$ac_given_INSTALL" in - [/$]*) INSTALL="$ac_given_INSTALL" ;; - *) INSTALL="$ac_dots$ac_given_INSTALL" ;; - esac - - echo "running ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir" - # The eval makes quoting arguments work. - if eval ${CONFIG_SHELL-/bin/sh} $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_sub_srcdir - then : - else - { echo "configure: error: $ac_sub_configure failed for $ac_config_dir" 1>&2; exit 1; } - fi - fi - - cd $ac_popdir - done -fi - - -- cgit v1.2.3