summaryrefslogtreecommitdiff
path: root/texinfo.tex
diff options
context:
space:
mode:
Diffstat (limited to 'texinfo.tex')
-rw-r--r--texinfo.tex60
1 files changed, 30 insertions, 30 deletions
diff --git a/texinfo.tex b/texinfo.tex
index 78a9d25..149d466 100644
--- a/texinfo.tex
+++ b/texinfo.tex
@@ -105,8 +105,8 @@
\hyphenation{eshell}
% Margin to add to right of even pages, to left of odd pages.
-\newdimen \bindingoffset
-\newdimen \normaloffset
+\newdimen \bindingoffset
+\newdimen \normaloffset
\newdimen\pagewidth \newdimen\pageheight
% Sometimes it is convenient to have everything in the transcript file
@@ -1349,7 +1349,7 @@ where each line of input produces a line of output.}
% Computer Modern typewriter fonts have zero interword stretch (and
% shrink), and it is reasonable to expect all typewriter fonts to have
% this property, we can check that font parameter.
-%
+%
\def\ifmonospace{\ifdim\fontdimen3\font=0pt }
% Typeset a dimension, e.g., `in' or `pt'. The only reason for the
@@ -1910,7 +1910,7 @@ July\or August\or September\or October\or November\or December\fi
% To make preamble:
%
-% Either define widths of columns in terms of percent of \hsize:
+% Either define widths of columns in terms of percent of \hsize:
% @multitable @columnfractions .25 .3 .45
% @item ...
%
@@ -1928,13 +1928,13 @@ July\or August\or September\or October\or November\or December\fi
% the preamble, break the line within one argument and it
% will parse correctly, i.e.,
%
-% @multitable {Column 1 template} {Column 2 template} {Column 3
+% @multitable {Column 1 template} {Column 2 template} {Column 3
% template}
% Not:
-% @multitable {Column 1 template} {Column 2 template}
+% @multitable {Column 1 template} {Column 2 template}
% {Column 3 template}
-% Each new table line starts with @item, each subsequent new column
+% Each new table line starts with @item, each subsequent new column
% starts with @tab. Empty columns may be produced by supplying @tab's
% with nothing between them for as many times as empty columns are needed,
% ie, @tab@tab@tab will produce two empty columns.
@@ -1946,15 +1946,15 @@ July\or August\or September\or October\or November\or December\fi
% @multitable {Column 1 template} {Column 2 template} {Column 3 template}
% @item first col stuff @tab second col stuff @tab third col
-% @item
-% first col stuff
-% @tab
-% second col stuff
-% @tab
-% third col
-% @item first col stuff @tab second col stuff
+% @item
+% first col stuff
+% @tab
+% second col stuff
+% @tab
+% third col
+% @item first col stuff @tab second col stuff
% @tab Many paragraphs of text may be used in any column.
-%
+%
% They will wrap at the width determined by the template.
% @item@tab@tab This will be in third column.
% @end multitable
@@ -1968,7 +1968,7 @@ July\or August\or September\or October\or November\or December\fi
% 0pt means it depends on current normal line spacing.
%%%%
-% Dimensions
+% Dimensions
\newskip\multitableparskip
\newskip\multitableparindent
@@ -2038,18 +2038,18 @@ July\or August\or September\or October\or November\or December\fi
% To parse everything between @multitable and @item :
\setuptable#1 \endsetuptable
% Need to reset this to 0 after \setuptable.
-\global\colcount=0\relax%
+\global\colcount=0\relax%
%
% This preamble sets up a generic column definition, which will
% be used as many times as user calls for columns.
- % \vtop will set a single line and will also let text wrap and
+ % \vtop will set a single line and will also let text wrap and
% continue for many paragraphs if desired.
\halign\bgroup&\global\advance\colcount by 1\relax%
\multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname
% In order to keep entries from bumping into each other
% we will add a \leftskip of \multitablecolspace to all columns after
% the first one.
- % If a template has been used, we will add \multitablecolspace
+ % If a template has been used, we will add \multitablecolspace
% to the width of each template entry.
% If user has set preamble in terms of percent of \hsize
% we will use that dimension as the width of the column, and
@@ -2061,7 +2061,7 @@ July\or August\or September\or October\or November\or December\fi
\ifsetpercent
\else
% If user has <not> set preamble in terms of percent of \hsize
- % we will advance \hsize by \multitablecolspace
+ % we will advance \hsize by \multitablecolspace
\advance\hsize by \multitablecolspace
\fi
% In either case we will make \leftskip=\multitablecolspace:
@@ -2097,7 +2097,7 @@ July\or August\or September\or October\or November\or December\fi
%% to keep lines equally spaced
\let\multistrut = \strut
%% Test to see if parskip is larger than space between lines of
-%% table. If not, do nothing.
+%% table. If not, do nothing.
%% If so, set to same dimension as multitablelinespace.
\else
\gdef\multistrut{\vrule height\multitablelinespace depth\dp0
@@ -2613,7 +2613,7 @@ width0pt\relax} \fi
\endgroup
% Back to normal single-column typesetting, but take account of the
% fact that we just accumulated some stuff on the output page.
- \pagegoal=\vsize
+ \pagegoal=\vsize
}
\def\balancecolumns{%
% Called on the last page of the double column material.
@@ -3139,7 +3139,7 @@ width0pt\relax} \fi
% Print any size section title.
-%
+%
% #1 is the section type (sec/subsec/subsubsec), #2 is the section
% number (maybe empty), #3 the text.
\def\sectionheading#1#2#3{%
@@ -3772,7 +3772,7 @@ width0pt\relax} \fi
% This is used for \def{tp,vr}parsebody. It could probably be used for
% some of the others, too, with some judicious conditionals.
-%
+%
\def\parsebodycommon#1#2#3{%
\begingroup\inENV %
\medbreak %
@@ -3807,13 +3807,13 @@ width0pt\relax} \fi
% Fine, but then we have to eventually remove the \empty *and* the
% braces (if any). That's what this does.
-%
+%
\def\removeemptybraces\empty#1\relax{#1}
% After \spacesplit has done its work, this is called -- #1 is the final
% thing to call, #2 the type name (which starts with \empty), and #3
% (which might be empty) the arguments.
-%
+%
\def\parsetpheaderline#1#2#3{%
#1{\removeemptybraces#2\relax}{#3}%
}%
@@ -4186,7 +4186,7 @@ width0pt\relax} \fi
% Use \turnoffactive so that punctuation chars such as underscore
% work in node names.
-\def\dosetq #1#2{{\let\folio=0 \turnoffactive
+\def\dosetq #1#2{{\let\folio=0 \turnoffactive
\edef\next{\write\auxfile{\internalsetq {#1}{#2}}}%
\next}}
@@ -4302,11 +4302,11 @@ width0pt\relax} \fi
% b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first
% argument, and \hat is not an expandable control sequence. It could
% all be worked out, but why? Either we support ^^ or we don't.
- %
+ %
% The other change necessary for this was to define \auxhat:
% \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter
% and then to call \auxhat in \setq.
- %
+ %
\catcode`\~=\other
\catcode`\[=\other
\catcode`\]=\other
@@ -4389,7 +4389,7 @@ width0pt\relax} \fi
% Don't bother with the trickery in plain.tex to not require the
% footnote text as a parameter. Our footnotes don't need to be so general.
-%
+%
% Oh yes, they do; otherwise, @ifset and anything else that uses
% \parseargline fail inside footnotes because the tokens are fixed when
% the footnote is read. --karl, 16nov96.