summaryrefslogtreecommitdiff
path: root/make.texinfo
diff options
context:
space:
mode:
Diffstat (limited to 'make.texinfo')
-rw-r--r--make.texinfo205
1 files changed, 128 insertions, 77 deletions
diff --git a/make.texinfo b/make.texinfo
index 78a0942..1755299 100644
--- a/make.texinfo
+++ b/make.texinfo
@@ -6,7 +6,10 @@
$Header$
$Log$
-Revision 1.22 1988/05/20 17:00:49 mcgrath
+Revision 1.23 1988/05/22 12:29:23 mcgrath
+Static pattern rules section rewritten by RMS.
+
+Revision 1.22 88/05/20 17:00:49 mcgrath
Documented extended static rules.
Revision 1.17 88/05/18 16:26:55 mcgrath
@@ -184,8 +187,6 @@ be recompiled, or how. @xref{Running}.
* Implicit:: Implicit rules take over if the makefile doesn't say
how a file is to be remade.
-* Static:: Extended static rules provide a compromise between explicit
- rules and implicit rule assumptions.
* Archives:: How to use @code{make} to update archive files.
* Missing:: Features of other @code{make}s not supported by GNU @code{make}.
@@ -604,6 +605,9 @@ or all the programs described by the makefile. @xref{Goals}.
* Special Targets:: Targets with special built-in meanings.
* Empty Targets:: Real files that are empty--only the date matters.
* Multiple Targets:: When it is useful to have several targets in a rule.
+* Static Pattern:: Static pattern rules apply to multiple targets
+ and can vary the dependencies according to the
+ target name.
* Multiple Rules:: Using several rules with the same target.
* Double-Colon:: Special kind of rule allowing
several independent rules for one target.
@@ -1220,7 +1224,12 @@ both pieces to the suffix list. In practice, suffixes normally begin with
@section Multiple Targets in a Rule
A rule with multiple targets is equivalent to writing many rules, each with
-one target, and all identical aside from that. This is useful in two cases.
+one target, and all identical aside from that. The same commands apply to
+all the targets, but their effects may vary because you can substitute the
+actual target name into the command using @samp{$@@}. The rule contributes
+the same dependencies to all the targets also.
+
+This is useful in two cases.
@itemize @bullet
@item
@@ -1235,8 +1244,9 @@ gives an additional dependency to each of the three object files
mentioned.
@item
-Identical commands work for all the targets. The automatic variable
-@samp{$@@} can be used to substitute the target to be remade into the
+Similar commands work for all the targets. The commands do not need
+to be absolutely identical, since the automatic variable @samp{$@@}
+can be used to substitute the particular target to be remade into the
commands (@pxref{Automatic}). For example:
@example
@@ -1260,7 +1270,117 @@ types of output, one if given @samp{-big} and one if given
@samp{-little}.@refill
@end itemize
-@node Multiple Rules, Double-Colon, Multiple Targets, Rules
+@ifinfo
+Suppose you would like to vary the dependencies according to the target,
+much as the variable @samp{$@@} allows you to vary the commands.
+You cannot do this with multiple targets in an ordinary rule, but you can
+do it with a @dfn{static pattern rule}. @xref{Static Pattern}.
+@end ifinfo
+
+@node Static Pattern, Multiple Rules, Multiple Targets, Rules
+@section Static Pattern Rules
+@cindex static pattern rules
+@cindex varying dependencies
+
+@dfn{Static pattern rules} are rules which specify multiple targets and
+construct the dependency names for each target based on the target name.
+They are more general than ordinary rules with multiple targets because the
+targets don't have to have identical dependencies. Their dependencies must
+be @emph{analogous}, but not necessarily @emph{identical}.
+
+Here is the syntax of a static pattern rule:
+
+@example
+@var{targets}: @var{target-pattern}: @var{dep-patterns} @dots{}
+ @var{commands}
+ @dots{}
+@end example
+
+@noindent
+Here @var{targets} gives the list of targets that the rule applies to. The
+targets can contain wildcard characters, just like the targets of ordinary
+rules (@pxref{Wildcards}).
+
+The @var{target-pattern} and @var{dep-patterns} say how to compute the
+dependencies of each target. Each target is matched against the
+@var{target-pattern} to extract a part of the target name, called the
+@dfn{stem}. This stem is substituted into each of the @var{dep-patterns}
+to make the dependency names (one from each @var{dep-pattern}).
+
+Each pattern normally contains the character @samp{%} just once. When the
+@var{target-pattern} matches a target, the @samp{%} can match any part of
+the target name; this part is called the @dfn{stem}. The rest of the
+pattern must match exactly. For example, the target @file{foo.o} matches
+the pattern @samp{%.o}, with @samp{foo} as the stem. The targets
+@file{foo.c} and @file{foo.out} don't match that pattern.@refill
+
+The dependency names for each target are made by substituting the stem for
+the @samp{%} in each dependency pattern. For example, if one dependency
+pattern is @file{%.c}, then substitution of the stem @samp{foo} gives the
+dependency name @file{foo.c}. It is fine to write a dependency pattern that
+doesn't contain @samp{%}; then this dependency is the same for all targets.
+
+Here is an example, which compiles each of @file{foo.o} and @file{bar.o}
+from the corresponding @file{.c} file:
+
+@example
+objects := foo.o bar.o
+
+$(objects): %.o: %.c
+ $(CC) -c $(CFLAGS) $< -o $@@
+@end example
+
+Each target specified must match the target pattern; a warning is issued
+for each that does not. If you have a list of files, only some of which
+will match the pattern, you can use the @code{filter} function to remove
+nonmatching filenames (@pxref{Functions}):
+
+@example
+files := foo.elc bar.o
+
+$(filter %.o,$(files)): %.o: %.c
+ $(CC) -c $(CFLAGS) $< -o $@@
+$(filter %.elc,$(files)): %.elc: %.el
+ emacs -f batch-byte-compile $<
+@end example
+
+@subsection Static Pattern Rules versus Implicit Rules
+
+A static pattern rule has much in common with an implicit rule defined as a
+pattern rule (@pxref{Pattern Rules}). Both have a pattern for the target
+and patterns for constructing the names of dependencies. The difference is
+in how @code{make} decides @emph{when} the rule applies.
+
+An implicit rule @emph{can} apply to any target that matches its pattern,
+but it @emph{does} apply only when the target has no commands otherwise
+specified, and only when the dependencies can be found. If more than one
+implicit rule appears applicable, only one applies; the choice depends on
+the order of rules.
+
+By contrast, a static pattern rule applies to the precise list of targets
+that you specify in the rule. It cannot apply to any other target and it
+invariably does apply to each of the targets specified. If two conflicting
+rules apply, and both have commands, that's an error.
+
+The static pattern rule can be better than an implicit rule for these
+reasons:
+
+@itemize @bullet
+@item
+You may wish to override the usual implicit rule for a few files whose
+names cannot be categorized syntactically but can be given in an
+explicit list.
+
+@item
+If you cannot be sure of the precise contents of the directories you
+are using, you may not be sure which other irrelevant files might lead
+@code{make} to use the wrong implicit rule. The choice might depend
+on the order in which the implicit rule search is done. With static
+pattern rules, there is no uncertainty: each rule applies to precisely
+the targets specified.
+@end itemize
+
+@node Multiple Rules, Double-Colon, Static Pattern, Rules
@section Multiple Rules for One Target
One file can be the target of several rules if at most one rule has commands.
@@ -3999,76 +4119,7 @@ The name of the first dependency that came via the implicit rule.
For @code{.DEFAULT} commands, as for non-implicit commands, @samp{$*}
and @samp{$<} are empty. @samp{$@@} is @var{t}, as always.
-@node Static, Archives, Implicit, Top
-@chapter Extended Static Rules
-@cindex extended static rules
-@cindex static rules
-@cindex explicit rules
-
-@dfn{Static rules}, or @dfn{explicit rules} are simple rules where you give
-the dependencies and commands for the targets. @dfn{Implicit rules}
-(@pxref{Implicit}) are rules generated by @code{make} for which you specify
-only the target (and perhaps some implicit rules in addition to the
-standard set), and the dependencies and commands are figured out for you.
-@dfn{Extended static rules} provide a compromise between these two types of
-rules. They have the flexibility of implicit rules, but do not depend on
-the contents of any directory to determine what is made from what.
-
-Extended static rules are basically implicit rules that are applied to a
-limited set of targets, rather than just any target that has no commands of
-its own. The syntax of this type of rule follows directly from this
-explanation:
-
-@example
-@var{targets}: @var{target-pattern}: @var{dep} @dots{}; @var{command}
- @var{command}
- @dots{}
-@end example
-
-The first part of this rule, ``@var{targets}:'' gives the list of targets
-that the rule applies to. These targets are filenames, possibly containing
-wildcard characters, just like the targets of ordinary explicit rules.
-The rest of the rule resembles an implicit pattern rule. It has a target
-pattern containing a @samp{%} character and dependency filenames, each of
-which may contain a @samp{%} which is replaced by what matched the @samp{%}
-in the target pattern.
-
-In extended static rules, each target must match the target pattern; a
-warning is issued for each that does not. If you have a list of files,
-only some of which will match the pattern, you can use the @samp{filter}
-function to remove nonmatching filenames:
-
-@example
-files := foo.elc bar.o
-
-$(filter %.o,$(files)): %.o: %.c; cc $< -o $@@
-$(filter %.elc,$(files)): %.elc: %.el; el-compile $< -o $@@
-@end example
-
-This type of rule is better than implicit rules in some situations
-for a few reasons:
-
-@itemize @bullet
-@item
-You may wish to have a different pattern rule apply to one set of files
-than applies to all others.
-
-@item
-If you cannot be sure of the contents of the directories in which your
-targets reside (or those listed in @code{vpath} search paths or the
-@code{VPATH} variable; @pxref{Directory Search}), you may want to
-circumvent possible unintended actions by @code{make} resulting from the
-wrong implicit rule matching.
-
-@item
-You may simply be of the opinion that implicit rules are inherently not
-particularly wonderful and would rather tell @code{make} exactly what to do
-with what, but without all the trouble of ordinary explicit rules.
-(This is included because that appears to be the opinion of the person who
-originally suggested the concept of extended static rules.)
-@end itemize
-
-@node Archives, Missing, Static, Top
+@node Archives, Missing, Implicit, Top
@chapter Using @code{make} to Update Archive Files
@cindex archive