.

1 files changed, 307 insertions, 0 deletions

diff --git a/Makefile.in b/Makefile.in
new file mode 100644
index 0000000..328fd69
--- /dev/null
+++ b/Makefile.in
@@ -0,0 +1,307 @@
+# NOTE: If you have no `make' program at all to process this makefile, run
+# `build.sh' instead.
+#
+# Copyright (C) 1988, 89, 91, 92, 93, 94, 1995 Free Software Foundation, Inc.
+# This file is part of GNU Make.
+# 
+# GNU Make is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# GNU Make is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with GNU Make; see the file COPYING.  If not, write to
+# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+#
+#	Makefile for GNU Make
+#
+
+# Ultrix 2.2 make doesn't expand the value of VPATH.
+VPATH = @srcdir@
+# This must repeat the value, because configure will remove `VPATH = .'.
+srcdir = @srcdir@
+
+CC = @CC@
+
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+LDFLAGS = @LDFLAGS@
+
+# Define these for your system as follows:
+#	-DNO_ARCHIVES		To disable `ar' archive support.
+#	-DNO_FLOAT		To avoid using floating-point numbers.
+#	-DENUM_BITFIELDS	If the compiler isn't GCC but groks enum foo:2.
+#				Some compilers apparently accept this
+#				without complaint but produce losing code,
+#				so beware.
+# NeXT 1.0a uses an old version of GCC, which required -D__inline=inline.
+# See also `config.h'.
+defines = @DEFS@ -DLIBDIR=\"$(libdir)\" -DINCLUDEDIR=\"$(includedir)\"
+
+# Which flavor of remote job execution support to use.
+# The code is found in `remote-$(REMOTE).c'.
+REMOTE = @REMOTE@
+
+# If you are using the GNU C library, or have the GNU getopt functions in
+# your C library, you can comment these out.
+GETOPT = getopt.o getopt1.o
+GETOPT_SRC = $(srcdir)/getopt.c $(srcdir)/getopt1.c $(srcdir)/getopt.h
+
+# If you are using the GNU C library, or have the GNU glob functions in
+# your C library, you can comment this out.  GNU make uses special hooks
+# into the glob functions to be more efficient (by using make's directory
+# cache for globbing), so you must use the GNU functions even if your
+# system's C library has the 1003.2 glob functions already.  Also, the glob
+# functions in the AIX and HPUX C libraries are said to be buggy.
+GLOB = glob/libglob.a
+
+# If your system doesn't have alloca, or the one provided is bad, define this.
+ALLOCA = @ALLOCA@
+ALLOCA_SRC = $(srcdir)/alloca.c
+
+# If your system needs extra libraries loaded in, define them here.
+# System V probably need -lPW for alloca.  HP-UX 7.0's alloca in
+# libPW.a is broken on HP9000s300 and HP9000s400 machines.  Use
+# alloca.c instead on those machines.
+LOADLIBES = @LIBS@
+
+# Any extra object files your system needs.
+extras = @LIBOBJS@
+
+# Common prefix for machine-independent installed files.
+prefix = @prefix@
+# Common prefix for machine-dependent installed files.
+exec_prefix = @exec_prefix@
+
+# Directory to install `make' in.
+bindir = $(exec_prefix)/bin
+# Directory to find libraries in for `-lXXX'.
+libdir = $(exec_prefix)/lib
+# Directory to search by default for included makefiles.
+includedir = $(prefix)/include
+# Directory to install the Info files in.
+infodir = $(prefix)/info
+# Directory to install the man page in.
+mandir = $(prefix)/man/man$(manext)
+# Number to put on the man page filename.
+manext = 1
+# Prefix to put on installed `make' binary file name.
+binprefix =
+# Prefix to put on installed `make' man page file name.
+manprefix = $(binprefix)
+
+# Whether or not make needs to be installed setgid.
+# The value should be either `true' or `false'.
+# On many systems, the getloadavg function (used to implement the `-l'
+# switch) will not work unless make is installed setgid kmem.
+install_setgid = @NEED_SETGID@
+# Install make setgid to this group so it can read /dev/kmem.
+group = @KMEM_GROUP@
+
+# Program to install `make'.
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+# Program to install the man page.
+INSTALL_DATA = @INSTALL_DATA@
+# Generic install program.
+INSTALL = @INSTALL@
+
+# Program to format Texinfo source into Info files.
+MAKEINFO = makeinfo
+# Program to format Texinfo source into DVI files.
+TEXI2DVI = texi2dvi
+
+# Programs to make tags files.
+ETAGS = etags -w
+CTAGS = ctags -w
+
+objs = commands.o job.o dir.o file.o misc.o main.o read.o remake.o	\
+       rule.o implicit.o default.o variable.o expand.o function.o	\
+       vpath.o version.o ar.o arscan.o signame.o remote-$(REMOTE).o	\
+       $(GLOB) $(GETOPT) $(ALLOCA) $(extras)
+srcs = $(srcdir)/commands.c $(srcdir)/job.c $(srcdir)/dir.c		\
+       $(srcdir)/file.c $(srcdir)/getloadavg.c $(srcdir)/misc.c		\
+       $(srcdir)/main.c $(srcdir)/read.c $(srcdir)/remake.c		\
+       $(srcdir)/rule.c $(srcdir)/implicit.c $(srcdir)/default.c	\
+       $(srcdir)/variable.c $(srcdir)/expand.c $(srcdir)/function.c	\
+       $(srcdir)/vpath.c $(srcdir)/version.c				\
+       $(srcdir)/remote-$(REMOTE).c					\
+       $(srcdir)/ar.c $(srcdir)/arscan.c				\
+       $(srcdir)/signame.c $(srcdir)/signame.h $(GETOPT_SRC)		\
+       $(srcdir)/commands.h $(srcdir)/dep.h $(srcdir)/file.h		\
+       $(srcdir)/job.h $(srcdir)/make.h $(srcdir)/rule.h		\
+       $(srcdir)/variable.h $(ALLOCA_SRC) $(srcdir)/config.h.in
+
+
+.SUFFIXES:
+.SUFFIXES: .o .c .h .ps .dvi .info .texinfo
+
+all: make
+info: make.info
+dvi: make.dvi
+# Some makes apparently use .PHONY as the default goal if it is before `all'.
+.PHONY: all check info dvi
+
+make.info: make.texinfo
+	$(MAKEINFO) -I$(srcdir) $(srcdir)/make.texinfo -o make.info
+
+make.dvi: make.texinfo
+	$(TEXI2DVI) $(srcdir)/make.texinfo
+
+make.ps: make.dvi
+	dvi2ps make.dvi > make.ps
+
+make: $(objs)
+	$(CC) $(LDFLAGS) $(objs) $(LOADLIBES) -o make.new
+	mv -f make.new make
+
+# -I. is needed to find config.h in the build directory.
+.c.o:
+	$(CC) $(defines) -c -I. -I$(srcdir) -I$(srcdir)/glob \
+	      $(CPPFLAGS) $(CFLAGS) $< $(OUTPUT_OPTION)
+
+# For some losing Unix makes.
+SHELL = /bin/sh
+@SET_MAKE@
+
+glob/libglob.a: FORCE config.h
+	cd glob; $(MAKE) libglob.a
+FORCE:
+
+tagsrcs = $(srcs) $(srcdir)/remote-*.c
+TAGS: $(tagsrcs)
+	$(ETAGS) $(tagsrcs)
+tags: $(tagsrcs)
+	$(CTAGS) $(tagsrcs)
+
+.PHONY: install installdirs
+install: installdirs \
+	 $(bindir)/$(binprefix)make $(infodir)/make.info \
+	 $(mandir)/$(manprefix)make.$(manext)
+
+installdirs:
+	$(SHELL) ${srcdir}/mkinstalldirs $(bindir) $(infodir) $(mandir)
+
+$(bindir)/$(binprefix)make: make
+	$(INSTALL_PROGRAM) make $@.new
+	@if $(install_setgid); then \
+	   if chgrp $(group) $@.new && chmod g+s $@.new; then \
+	     echo "chgrp $(group) $@.new && chmod g+s $@.new"; \
+	   else \
+	     echo "$@ needs to be owned by group $(group) and setgid;"; \
+	     echo "otherwise the \`-l' option will probably not work."; \
+	     echo "You may need special privileges to install $@."; \
+	   fi; \
+	 else true; fi
+# Some systems can't deal with renaming onto a running binary.
+	-rm -f $@.old
+	-mv $@ $@.old
+	mv $@.new $@
+
+$(infodir)/make.info: make.info
+	if [ -r ./make.info ]; then dir=.; else dir=$(srcdir); fi; \
+	for file in $${dir}/make.info*; do \
+	  name="`basename $$file`"; \
+	  $(INSTALL_DATA) $$file \
+	    `echo $@ | sed "s,make.info\$$,$$name,"`; \
+	done
+# Run install-info only if it exists.
+# Use `if' instead of just prepending `-' to the
+# line so we notice real errors from install-info.
+# We use `$(SHELL) -c' because some shells do not
+# fail gracefully when there is an unknown command.
+	if $(SHELL) -c 'install-info --version' >/dev/null 2>&1; then \
+	  install-info --infodir=$(infodir) $$dir/make.info; \
+	else true; fi
+
+$(mandir)/$(manprefix)make.$(manext): make.man
+	$(INSTALL_DATA) $(srcdir)/make.man $@
+
+
+loadavg: loadavg.c config.h
+	$(CC) $(defines) -DTEST -I. -I$(srcdir) $(CFLAGS) $(LDFLAGS) \
+	      loadavg.c $(LOADLIBES) -o $@
+# We copy getloadavg.c into a different file rather than compiling it
+# directly because some compilers clobber getloadavg.o in the process.
+loadavg.c: getloadavg.c
+	ln $(srcdir)/getloadavg.c loadavg.c || \
+	cp $(srcdir)/getloadavg.c loadavg.c
+check-loadavg: loadavg
+	@echo The system uptime program believes the load average to be:
+	-uptime
+	@echo The GNU load average checking code believes:
+	./loadavg
+check: check-loadavg
+
+
+.PHONY: clean realclean distclean mostlyclean
+clean: glob-clean
+	-rm -f make loadavg *.o core make.dvi
+distclean: clean glob-realclean
+	-rm -f Makefile config.h config.status build.sh stamp-config
+	-rm -f config.log config.cache
+	-rm -f TAGS tags
+	-rm -f make.?? make.??s make.log make.toc make.*aux
+	-rm -f loadavg.c
+realclean: distclean
+	-rm -f make.info*
+mostlyclean: clean
+
+.PHONY: glob-clean glob-realclean
+glob-clean glob-realclean:
+	cd glob; $(MAKE) $@
+
+Makefile: config.status $(srcdir)/Makefile.in
+	$(SHELL) config.status
+glob/Makefile: config.status $(srcdir)/glob/Makefile.in
+	$(SHELL) config.status
+config.h: stamp-config ;
+stamp-config: config.status $(srcdir)/config.h.in
+	$(SHELL) config.status
+	touch stamp-config
+
+# These rules cause too much trouble.
+#configure: configure.in
+#	autoconf $(ACFLAGS)
+#config.h.in: configure.in
+#	autoheader $(ACFLAGS)
+
+# This tells versions [3.59,3.63) of GNU make not to export all variables.
+.NOEXPORT:
+
+# The automatically generated dependencies below may omit config.h
+# because it is included with ``#include <config.h>'' rather than
+# ``#include "config.h"''.  So we add the explicit dependency to make sure.
+$(objs): config.h
+
+# Automatically generated dependencies will be put at the end of the file.
+
+# Automatically generated dependencies.
+commands.o : commands.c make.h dep.h commands.h file.h variable.h job.h 
+job.o: job.c make.h commands.h job.h file.h variable.h
+dir.o: dir.c make.h
+file.o : file.c make.h commands.h dep.h file.h variable.h 
+misc.o: misc.c make.h dep.h
+main.o: main.c make.h commands.h dep.h file.h variable.h job.h getopt.h
+read.o: read.c make.h commands.h dep.h file.h variable.h glob/glob.h
+remake.o: remake.c make.h commands.h job.h dep.h file.h
+rule.o : rule.c make.h config.h commands.h dep.h file.h variable.h rule.h 
+implicit.o : implicit.c make.h rule.h dep.h file.h 
+default.o: default.c make.h rule.h dep.h file.h commands.h variable.h
+variable.o : variable.c make.h commands.h variable.h dep.h file.h 
+expand.o: expand.c make.h commands.h file.h variable.h
+function.o : function.c make.h variable.h dep.h commands.h job.h 
+vpath.o : vpath.c make.h file.h variable.h 
+version.o: version.c
+ar.o : ar.c make.h file.h dep.h 
+arscan.o: arscan.c make.h
+signame.o: signame.c signame.h
+remote-stub.o : remote-stub.c make.h commands.h 
+getopt.o: getopt.c getopt.h
+getopt1.o : getopt1.c getopt.h 
+getloadavg.o: getloadavg.c