Updates and fixes for CVS builds.

Created a README.cvs describing the procedure.

5 files changed, 123 insertions, 335 deletions

diff --git a/ChangeLog b/ChangeLog
index 167f495..ebfee01 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -4,6 +4,14 @@
 	gettext (0.11.1).  We're using gettext's new "external" support,
 	to avoid including libintl source with GNU make.
 
+	* README.cvs: New file.  Explain how to build GNU make from CVS.
+
+	* getloadavg.c (main): Include make.h in the "TEST" program to
+	avoid warnings.
+
+	* Makefile.am: Remove special rules for loadavg.  Replace them
+	with Automake capabilities for building extra programs.
+
 	* signame.c: This file does nothing if the system provide
 	strsignal().  If not, it implements strsignal().  If the system
 	doesn't define sys_siglist, then we make our own; otherwise we use
diff --git a/Makefile.am b/Makefile.am
index 753ca9b..dfd6929 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -32,6 +32,7 @@ DEFS =		-DLOCALEDIR=\"$(localedir)\" -DLIBDIR=\"$(libdir)\" -DINCLUDEDIR=\"$(inc
 
 AM_CPPFLAGS =	$(GLOBINC)
 
+
 EXTRA_DIST =	build.sh.in $(man_MANS)\
 		README.customs\
 		make-stds.texi SCOPTIONS SMakefile\
@@ -41,10 +42,6 @@ EXTRA_DIST =	build.sh.in $(man_MANS)\
 		readme.vms makefile.vms makefile.com config.h-vms \
 		vmsdir.h vmsfunctions.c vmsify.c
 
-
-MOSTLYCLEANFILES = loadavg.c
-CLEANFILES =	loadavg
-
 MAKE_HOST =	@MAKE_HOST@
 
 
@@ -105,25 +102,17 @@ check-local: check-regression check-loadavg
 
 .PHONY: check-loadavg check-regression
 
-# > check-loadavg
-#
-loadavg: loadavg.c config.h
-	@rm -f loadavg
-	$(LINK) -DTEST $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(make_LDFLAGS) loadavg.c $(LIBS)
-
-# We copy getloadavg.c into a different file rather than compiling it
-# directly because some compilers clobber getloadavg.o in the process.
-#
-loadavg.c: getloadavg.c
-	ln $(srcdir)/getloadavg.c loadavg.c || \
-	  cp $(srcdir)/getloadavg.c loadavg.c
-
 check-loadavg: loadavg
 	@echo The system uptime program believes the load average to be:
 	-uptime
-	@echo The GNU load average checking code believes:
+	@echo The GNU load average checking code thinks:
 	-./loadavg
 
+# The loadavg function is invoked during "make check" to test getloadavg.
+noinst_PROGRAMS = loadavg
+loadavg_SOURCES = getloadavg.c
+loadavg_CFLAGS = -DTEST
+
 # > check-regression
 #
 # Look for the make test suite, and run it if found and we can find perl.
diff --git a/README.cvs b/README.cvs
new file mode 100644
index 0000000..7a63b04
--- /dev/null
+++ b/README.cvs
@@ -0,0 +1,106 @@
+                                                                     -*-text-*-
+
+Obtaining CVS Code
+------------------
+
+This seems redundant, since if you're reading this you most likely have
+already performed this step; however, for completeness, you can obtain
+the GNU make source code via anonymous CVS from the FSF's Savannah
+project <http://savannah.gnu.org/projects/make/>:
+
+  $ cvs -d:pserver:anoncvs@subversions.gnu.org:/cvsroot/make co make
+
+You might want to use the "-z3" option to get compression, and you most
+certainly will want the -P option to avoid unneeded directories
+cluttering up your source.  Personally I add these (as well as -dP for
+update) to my ~/.cvsrc file.
+
+
+If you have an older version of CVS, you might have to login first.
+There is no password; just hit the ENTER key if you are asked for one.
+
+
+Building From CVS
+-----------------
+
+To build GNU make from CVS, you will need Autoconf 2.53 (or better),
+Automake 1.6.1 (or better), and Gettext 0.11.1 (or better), and any
+tools that those utilities require (GNU m4, Perl, etc.).
+
+After checking out the code, you will need to perform these steps to get
+to the point where you can run "configure" then "make".
+
+Hopefully at some point in the (near) future this will all be obsolete
+and you can just run "autoreconf" and have it DTRT.
+
+
+ 1) $ gettextize --no-changelog
+    $ mv config/Makefile.am{~,}
+    $ mv Makefile.am{~,}
+    $ mv configure.in{~,}
+
+    This will instantiate various m4 macros files, etc. in the config
+    and po directories.
+
+    The mv commands are necessary because gettextize doesn't realize
+    that the things it's adding to those files already exist in it.
+
+
+
+ 2) $ aclocal -I config
+
+    Generate the proper aclocal.m4 file.
+
+
+ 3) $ automake --add-missing
+
+    Add (symlink) missing files into the distribution, and generate
+    Makefile.in's from Makefile.am's.
+
+    You will see these perhaps unexpected messages (among others which
+    you should be expecting :)); just ignore them--I know what I'm doing
+    :).
+
+      Makefile.am: required file `./README' not found
+      configure.in:xxx: required file `./build.sh.in' not found
+      Makefile.am:xxx: automatically discovered file `getloadavg.c' should not be explicitly mentioned
+
+
+ 4) $ autoconf
+
+    Generate a "configure" script from configure.in and acinclude.m4.
+
+
+ 5) $ autoheader
+
+    Generate a "config.h.in" file from the contents of configure.in,
+    etc.
+
+
+At this point you have successfully brought your CVS copy of the GNU
+make source directory up to the point where it can be treated
+more-or-less like the official package you would get from ftp.gnu.org.
+That is, you can just run:
+
+  $ ./configure && make && make check && make install
+
+to build and install GNU make.
+
+
+Creating a Package
+------------------
+
+Once you have performed the above steps (including the configuration and
+build) you can create a GNU make package.  This is very simple, just
+run:
+
+  $ make dist-gzip
+
+and, if you like:
+
+  $ make dist-bzip2
+
+After you do this you should be sure to run "make distcheck" to be sure
+that the package file is correct.
+
+That's it!
diff --git a/getloadavg.c b/getloadavg.c
index 79eedfc..27897fb 100644
--- a/getloadavg.c
+++ b/getloadavg.c
@@ -1038,6 +1038,8 @@ getloadavg (loadavg, nelem)
 #endif /* ! HAVE_GETLOADAVG */
 
 #ifdef TEST
+#include "make.h"
+
 int
 main (argc, argv)
      int argc;
diff --git a/po/Makefile.in.in b/po/Makefile.in.in
deleted file mode 100644
index ada8bb4..0000000
--- a/po/Makefile.in.in
+++ /dev/null
@@ -1,317 +0,0 @@
-# Makefile for PO directory in any package using GNU gettext.
-# Copyright (C) 1995-1997, 2000-2002 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
-#
-# This file can be copied and used freely without restrictions.  It can
-# be used in projects which are not available under the GNU General Public
-# License but which still want to provide support for the GNU gettext
-# functionality.
-# Please note that the actual code of GNU gettext is covered by the GNU
-# General Public License and is *not* in the public domain.
-
-PACKAGE = @PACKAGE@
-VERSION = @VERSION@
-
-SHELL = /bin/sh
-@SET_MAKE@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-datadir = @datadir@
-localedir = $(datadir)/locale
-gettextsrcdir = $(datadir)/gettext/po
-
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-mkinstalldirs = $(SHELL) `case "$(MKINSTALLDIRS)" in /*) echo "$(MKINSTALLDIRS)" ;; *) echo "$(top_builddir)/$(MKINSTALLDIRS)" ;; esac`
-
-GMSGFMT = @GMSGFMT@
-MSGFMT = @MSGFMT@
-XGETTEXT = @XGETTEXT@
-MSGMERGE = msgmerge
-MSGMERGE_UPDATE = @MSGMERGE@ --update
-MSGINIT = msginit
-MSGCONV = msgconv
-MSGFILTER = msgfilter
-
-POFILES = @POFILES@
-GMOFILES = @GMOFILES@
-UPDATEPOFILES = @UPDATEPOFILES@
-DUMMYPOFILES = @DUMMYPOFILES@
-DISTFILES.common = Makefile.in.in Makevars remove-potcdate.sin \
-$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
-DISTFILES = $(DISTFILES.common) POTFILES.in $(DOMAIN).pot \
-$(POFILES) $(GMOFILES) \
-$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
-
-POTFILES = \
-
-CATALOGS = @CATALOGS@
-
-# Makevars gets inserted here. (Don't remove this line!)
-
-.SUFFIXES:
-.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-update
-
-.po.mo:
-	@echo "$(MSGFMT) -c -o $@ $<"; \
-	$(MSGFMT) -c -o t-$@ $< && mv t-$@ $@
-
-.po.gmo:
-	@lang=`echo $* | sed -e 's,.*/,,'`; \
-	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
-	echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po"; \
-	cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
-
-.sin.sed:
-	sed -e '/^#/d' $< > t-$@
-	mv t-$@ $@
-
-
-all: all-@USE_NLS@
-
-all-yes: $(CATALOGS)
-all-no:
-
-# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
-# otherwise packages like GCC can not be built if only parts of the source
-# have been downloaded.
-
-$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
-	$(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
-	  --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \
-	  --files-from=$(srcdir)/POTFILES.in \
-	  --copyright-holder='$(COPYRIGHT_HOLDER)'
-	test ! -f $(DOMAIN).po || { \
-	  if test -f $(srcdir)/$(DOMAIN).pot; then \
-	    sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
-	    sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
-	    if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
-	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
-	    else \
-	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
-	      mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
-	    fi; \
-	  else \
-	    mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
-	  fi; \
-	}
-
-$(srcdir)/$(DOMAIN).pot:
-	$(MAKE) $(DOMAIN).pot-update
-
-$(POFILES): $(srcdir)/$(DOMAIN).pot
-	@lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
-	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
-	echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \
-	cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot
-
-
-install: install-exec install-data
-install-exec:
-install-data: install-data-@USE_NLS@
-	if test "$(PACKAGE)" = "gettext"; then \
-	  $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
-	  for file in $(DISTFILES.common); do \
-	    $(INSTALL_DATA) $(srcdir)/$$file \
-			    $(DESTDIR)$(gettextsrcdir)/$$file; \
-	  done; \
-	else \
-	  : ; \
-	fi
-install-data-no: all
-install-data-yes: all
-	$(mkinstalldirs) $(DESTDIR)$(datadir)
-	@catalogs='$(CATALOGS)'; \
-	for cat in $$catalogs; do \
-	  cat=`basename $$cat`; \
-	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
-	  dir=$(localedir)/$$lang/LC_MESSAGES; \
-	  $(mkinstalldirs) $(DESTDIR)$$dir; \
-	  if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
-	  $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
-	  echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
-	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
-	    if test -n "$$lc"; then \
-	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
-	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
-	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
-	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
-	         for file in *; do \
-	           if test -f $$file; then \
-	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
-	           fi; \
-	         done); \
-	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
-	      else \
-	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
-	          :; \
-	        else \
-	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	        fi; \
-	      fi; \
-	      rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
-	      ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
-	      ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
-	      cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
-	      echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
-	    fi; \
-	  done; \
-	done
-
-install-strip: install
-
-installdirs: installdirs-exec installdirs-data
-installdirs-exec:
-installdirs-data: installdirs-data-@USE_NLS@
-	if test "$(PACKAGE)" = "gettext"; then \
-	  $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
-	else \
-	  : ; \
-	fi
-installdirs-data-no:
-installdirs-data-yes:
-	$(mkinstalldirs) $(DESTDIR)$(datadir)
-	@catalogs='$(CATALOGS)'; \
-	for cat in $$catalogs; do \
-	  cat=`basename $$cat`; \
-	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
-	  dir=$(localedir)/$$lang/LC_MESSAGES; \
-	  $(mkinstalldirs) $(DESTDIR)$$dir; \
-	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
-	    if test -n "$$lc"; then \
-	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
-	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
-	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
-	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
-	         for file in *; do \
-	           if test -f $$file; then \
-	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
-	           fi; \
-	         done); \
-	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
-	      else \
-	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
-	          :; \
-	        else \
-	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
-	        fi; \
-	      fi; \
-	    fi; \
-	  done; \
-	done
-
-# Define this as empty until I found a useful application.
-installcheck:
-
-uninstall: uninstall-exec uninstall-data
-uninstall-exec:
-uninstall-data: uninstall-data-@USE_NLS@
-	if test "$(PACKAGE)" = "gettext"; then \
-	  for file in $(DISTFILES.common); do \
-	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
-	  done; \
-	else \
-	  : ; \
-	fi
-uninstall-data-no:
-uninstall-data-yes:
-	catalogs='$(CATALOGS)'; \
-	for cat in $$catalogs; do \
-	  cat=`basename $$cat`; \
-	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
-	  for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
-	    rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
-	  done; \
-	done
-
-check: all
-
-dvi info tags TAGS ID:
-
-mostlyclean:
-	rm -f remove-potcdate.sed
-	rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
-	rm -fr *.o
-
-clean: mostlyclean
-
-distclean: clean
-	rm -f Makefile Makefile.in POTFILES *.mo
-
-maintainer-clean: distclean
-	@echo "This command is intended for maintainers to use;"
-	@echo "it deletes files that may require special tools to rebuild."
-	rm -f $(GMOFILES)
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-dist distdir:
-	$(MAKE) update-po
-	@$(MAKE) dist2
-# This is a separate target because 'update-po' must be executed before.
-dist2: $(DISTFILES)
-	dists="$(DISTFILES)"; \
-	if test -f $(srcdir)/ChangeLog; then dists="$$dists ChangeLog"; fi; \
-	if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
-	for file in $$dists; do \
-	  if test -f $$file; then \
-	    cp -p $$file $(distdir); \
-	  else \
-	    cp -p $(srcdir)/$$file $(distdir); \
-	  fi; \
-	done
-
-update-po: Makefile
-	$(MAKE) $(DOMAIN).pot-update
-	$(MAKE) $(UPDATEPOFILES)
-	$(MAKE) update-gmo
-
-# General rule for updating PO files.
-
-.nop.po-update:
-	@lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
-	if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; fi; \
-	tmpdir=`pwd`; \
-	echo "$$lang:"; \
-	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
-	echo "$${cdcmd}$(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
-	cd $(srcdir); \
-	if $(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$tmpdir/$$lang.new.po; then \
-	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
-	    rm -f $$tmpdir/$$lang.new.po; \
-	  else \
-	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
-	      :; \
-	    else \
-	      echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
-	      exit 1; \
-	    fi; \
-	  fi; \
-	else \
-	  echo "msgmerge for $$lang.po failed!" 1>&2; \
-	  rm -f $$tmpdir/$$lang.new.po; \
-	fi
-
-$(DUMMYPOFILES):
-
-update-gmo: Makefile $(GMOFILES)
-	@:
-
-Makefile: Makefile.in.in $(top_builddir)/config.status POTFILES.in
-	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@.in CONFIG_HEADERS= \
-	       $(SHELL) ./config.status
-
-force:
-
-# Tell versions [3.59,3.63) of GNU make not to export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT: