Update installation instructions.

4 files changed, 25 insertions, 25 deletions

diff --git a/INSTALL b/INSTALL
index 1da4d7ad..1e475f4e 100644
--- a/INSTALL
+++ b/INSTALL
@@ -3,11 +3,11 @@ Requirements
 
 OpenAxiom currenly requires a Lisp system for its runtime support.
 OpenAxiom is known to build with the GNU Common Lisp (GCL versions 2.6.7
-or 2.6.8), Steel Bank Common Lisp (SBCL version 1.0.x or higher), and
-CLisp (version 2.44.x or higher).  So, if you already have any of the
-above mentioned Lisp system, your are good to go.  Otherwise, you
-would need to download a dependency tarball from OpenAxiom's download
-web site.  See instructions below. 
+or 2.6.8), Steel Bank Common Lisp (SBCL version 1.0.x or higher),
+CLisp (version 2.44.x or higher), and ECL (version 0.9l or higher).  
+So, if you already have any of the above mentioned Lisp system, your
+are good to go.  Otherwise, you would need to download a dependency
+tarball from OpenAxiom's download web site.  See instructions below. 
 
 OpenAxiom needs `noweb' for extracting its source codes.  If you don't
 have running `noweb' utilities, you would need to either download the
@@ -31,7 +31,7 @@ If any of GCL or noweb is missing from the environment environment
 where you're building, then you need to either separately install
 them, or download the dependency tarball
 
-    open-axiom-1.1.x-dep.tar.bz2
+    open-axiom-1.2.x-dep.tar.bz2
 
 Please, notice that GCL and noweb are needed only to *build*
 OpenAxiom.  If you plan to build OpenAxiom often, then it probably is
@@ -46,23 +46,23 @@ environment, then you should add the option --enable-gcl to the
 configure command line.  In short, add --enable-gcl if you
 specifically insist on GCL as the base Lisp runtime system.
 
-1.a. Download the dependency tarball open-axiom-1.1.x-dep.tar.bz2
+1.a. Download the dependency tarball open-axiom-1.2.x-dep.tar.bz2
 
 1.b. Decompress the dependency tarball
 
-      tar jxfv open-axiom-1.1.x-dep.tar.bz2
+      tar jxfv open-axiom-1.2.x-dep.tar.bz2
 
 
     That should decompress the dependency tarball in a directory
-named open-axiom-1.1.x.  Rename it to open-axiom-1.2.0, e.g.:
+named open-axiom-1.2.x.  Rename it to open-axiom-1.3.0, e.g.:
 
-       mv open-axiom-1.1.x open-axiom-1.2.0
+       mv open-axiom-1.2.x open-axiom-1.3.0
 
 2. Building OpenAxiom
    ------------------
 
 It is assumed you have already downloaded open-axiom source tarball,
-e.g. open-axiom-1.2.0.tar.bz2.  
+e.g. open-axiom-1.3.0.tar.bz2.  
 
 Note: If you don't have GCL or noweb in the build environment, please
 make sure that you have either followed the instructions in step 1.,
@@ -70,7 +70,7 @@ or have separately installed them before proceeding.
 
 2.a. Decompress the OpenAxiom source tarball
 
-      tar jfxv open-axiom-1.2.0.tar.bz2
+      tar jfxv open-axiom-1.3.0.tar.bz2
 
 2.b. Configure OpenAxiom
 
@@ -81,7 +81,7 @@ system from there:
 
       mkdir build-oa
       cd build-oa
-      ../open-axiom-1.2.0/configure
+      ../open-axiom-1.3.0/configure
 
 It is possible to tell configure where to put the final OpenAxiom
 executables.  By default, when you just type in configure like above,
@@ -89,7 +89,7 @@ it will configure the system with prefix /usr/local.  You can instead
 say where you want it to be installed, let's say /banana/space.  You
 would then have typed
 
-     ../open-axiom-1.2.0/configure --prefix=/banana/space
+     ../open-axiom-1.3.0/configure --prefix=/banana/space
 
 This is recommended, especially if you already have a different software, 
 not OpenAxiom, the executable filename of which is also called `axiom'.
diff --git a/configure b/configure
index 27dc6beb..b950df9f 100755
--- a/configure
+++ b/configure
@@ -1,6 +1,6 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.60 for OpenAxiom 1.2.0-2008-08-19.
+# Generated by GNU Autoconf 2.60 for OpenAxiom 1.3.0-2008-08-19.
 #
 # Report bugs to <open-axiom-bugs@lists.sf.net>.
 #
@@ -713,8 +713,8 @@ SHELL=${CONFIG_SHELL-/bin/sh}
 # Identity of this package.
 PACKAGE_NAME='OpenAxiom'
 PACKAGE_TARNAME='openaxiom'
-PACKAGE_VERSION='1.2.0-2008-08-19'
-PACKAGE_STRING='OpenAxiom 1.2.0-2008-08-19'
+PACKAGE_VERSION='1.3.0-2008-08-19'
+PACKAGE_STRING='OpenAxiom 1.3.0-2008-08-19'
 PACKAGE_BUGREPORT='open-axiom-bugs@lists.sf.net'
 
 ac_unique_file="src/Makefile.pamphlet"
@@ -1405,7 +1405,7 @@ if test "$ac_init_help" = "long"; then
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures OpenAxiom 1.2.0-2008-08-19 to adapt to many kinds of systems.
+\`configure' configures OpenAxiom 1.3.0-2008-08-19 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -1475,7 +1475,7 @@ fi
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of OpenAxiom 1.2.0-2008-08-19:";;
+     short | recursive ) echo "Configuration of OpenAxiom 1.3.0-2008-08-19:";;
    esac
   cat <<\_ACEOF
 
@@ -1579,7 +1579,7 @@ fi
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
-OpenAxiom configure 1.2.0-2008-08-19
+OpenAxiom configure 1.3.0-2008-08-19
 generated by GNU Autoconf 2.60
 
 Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
@@ -1593,7 +1593,7 @@ cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by OpenAxiom $as_me 1.2.0-2008-08-19, which was
+It was created by OpenAxiom $as_me 1.3.0-2008-08-19, which was
 generated by GNU Autoconf 2.60.  Invocation command line was
 
   $ $0 $@
@@ -26094,7 +26094,7 @@ exec 6>&1
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
-This file was extended by OpenAxiom $as_me 1.2.0-2008-08-19, which was
+This file was extended by OpenAxiom $as_me 1.3.0-2008-08-19, which was
 generated by GNU Autoconf 2.60.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
@@ -26143,7 +26143,7 @@ Report bugs to <bug-autoconf@gnu.org>."
 _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF
 ac_cs_version="\\
-OpenAxiom config.status 1.2.0-2008-08-19
+OpenAxiom config.status 1.3.0-2008-08-19
 configured by $0, generated by GNU Autoconf 2.60,
   with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
 
diff --git a/configure.ac b/configure.ac
index a39715a4..56015133 100644
--- a/configure.ac
+++ b/configure.ac
@@ -1,6 +1,6 @@
 sinclude(config/open-axiom.m4)
 sinclude(config/aclocal.m4)
-AC_INIT([OpenAxiom], [1.2.0-2008-08-19], 
+AC_INIT([OpenAxiom], [1.3.0-2008-08-19], 
         [open-axiom-bugs@lists.sf.net])
 
 AC_CONFIG_AUX_DIR(config)
diff --git a/configure.ac.pamphlet b/configure.ac.pamphlet
index ebc503ce..25423e46 100644
--- a/configure.ac.pamphlet
+++ b/configure.ac.pamphlet
@@ -1122,7 +1122,7 @@ information:
 <<Autoconf init>>=
 sinclude(config/open-axiom.m4)
 sinclude(config/aclocal.m4)
-AC_INIT([OpenAxiom], [1.2.0-2008-08-19], 
+AC_INIT([OpenAxiom], [1.3.0-2008-08-19], 
         [open-axiom-bugs@lists.sf.net])
 
 @